Apple TV - can I pair my macbook and my wife's macbook at the same time with different itunes accounts?

Just bought the Apple TV2 yesteday.
I'd like to pair both my macbook and my wifes macbook to the Apple TV.  We both have seperate iTunes accounts.
Is this possible without having to sign on or the other out of apple TV?

Welcome to the Apple Community.
Yes you can do that. The key to this is remembering your homesharing ID and your iTunes account ID are not the same thing (although you can use your account details for your homesharing details)
Set up homesharing in both instances of iTunes using the same information in each, your Apple TV will then see both libraries.

Similar Messages

  • Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time.  She wants I.O.S. 8 removed.  How do I remove it from both devices?  I am willing to resort to my old IOS7.1.2.

    Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time.  She wants I.O.S. 8 removed.  How do I remove it from both devices?  I am willing to resort to my old IOS7.1.2.

    Sorry...downgrading is not supported.

  • Can't connect to Internet and 192.168.1 network at the same time

    I have been having an issue with my MacBook's networking for the past 4 months. Here are the specifics:
    *My MacBook is connected to the Internet via a linux router, with an address in the 192.168.1.x address space. DNS server is an openDns server, 208.67.222.222
    *My MacBook is assigned an IP Address manually in the 192.168.1.x namespace
    *I have a printer manually assigned an address in the 192.168.1.x namespace
    Problem:
    * I can only connect to my printer if I leave my DNS server entry blank under my Airport TCP/IP configuration
    * I can only connect to the Internet when my DNS server entry to set to the openDNS server entry.
    Question:
    Is there any way I can connect to both my local network printer and the Internet at the same time? I have set up two locations that I can switch between, but I would prefer to be able to access both networks at once.

    I tried turning AppleTalk on, but no luck.
    It seems that the problem is related to basic TCP/IP connectivity. For example, when my DNS server is set to blank, I get a fine response from the command "ping 192.168.1.253". However, when my DNS is set to one of the openDNS servers, I get this error:
    PING 192.168.1.253 (192.168.1.253): 56 data bytes
    ping: sendto: No route to host
    ping: sendto: Host is down

  • Can we use both 0FI_AP_3 and 0FI_AP_4 for Delta Loads at the same time.....

    Hi Gurus:
    Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
    Please let me know as this impacts a lot of my development....! Thanks....
    Best...... ShruMaa
    PS:  I had posted this in "BI Extractors" forum but there has been no response......  Hope to get some response.......!  Thanks

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • Can I use both ePrint and AirPrint on an HP4630 at the same time

    I have an HP4630 printer that I wish to use with an iPad and Mac Notebook (PowerPC running OS X 10.5.8) and want to know if I can run AirPrint for iPad and ePrint for Mac Notebook at the sametime.
    I understand that Mac Notebook can not connect to the printer over the network because it is not capable of running OS X 10.6 and above.
    I appreciate your help.
    This question was solved.
    View Solution.

    Hello Chesher5,
    Welcome to the HP Support Forums!
    Regarding the inquiry into ePrint and AirPrint for the Officejet 4630, yes they can be both used at the same time. They are completely separate means of printing. Both require a network connection though.
    If you have any problems setting up or using either, please let me know and I'll do my best to assist.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Can I extend both a 2.4Ghz and a 5Ghz wireless network at the same time with a second Timecapsule / Extreme ?

    Can I extend both a 2.4Ghz and a 5Ghz wireless network coming from a Timecapsule  with a second Timecapsule / Extreme at the same time?

    I am currently extending my 5Ghz network via an Express without any problems, but the Express can only extend either / or. I just want full coverage for both networks in the whole house.
    If you can extend 5 GHz now with an AirPort Express and get satisfactory results, then the AirPort Extreme will work to extend both the 2.4 GHz and 5 GHz bands in the same location.
    However, your computer is going to connect to the band with the strongest signal, so it may....or may not....connect to 5 GHz given a choice of two signals.

  • How can I share only the same music with multiple iTunes accounts

    Hello
    I hope someone can help. [I am using Windows Vista (Unfortunately J) and iTunes 10]
    I am trying to share the same music library with multiple iTunes accounts. Basically, I want to know if there is a way to automatically upload to other libraries when importing new music into my library, vice versa. [Better information below]
    Me, my sister and my dad all use iTunes (on different iTunes accounts), and before now we used to have are own music on our own windows user. Due to many duplicates and a loss of hard drive space I have brought an external hard drive and organised all the music.
    It was all going well - I first populated all the music onto my iTunes, exported the library, and then imported it on both the other users. However! Because this is only a copy of the library, when I try to import a new CD, it will not show up on there’s until I “Add File to Library”! Originally I thought about using the same library however we each have are own apps etc, that we don’t want to share.
    If you need anymore information please ask!
    Matt

    Hello roaminggnome
    Unfortunately the support is down at the moment, I will have a better look later. I did go though the Apple support previously, however I found nothing that worked.
    The first thread I came across was “Home Sharing” however no mater what I did, it did not appear in the iTunes sharing list (I did go though the “Show Sharing Networks” support as well)
    Secondly, I saw “Using A Single Library With Multiple Accounts On The Same PC” (Something like that) but all this did was let us share the same music location, if I was to rip extra music, it will not show in there library
    Matt

  • Can I record video and line in mixer at the same time with iPod touch?

    Can I record video and line in mixer audio at the same time, with the iPod touch?

    What is a "line in imxer audio" You can use an externeral mic plugged into the headphone jack to record auid for a video using the 4G iPod's camera.

  • If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?

    If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?
    for instance Keynote?

    Welcome to the Apple community.
    The Apple TV cannot display keynote presentations or websites from the computer. It can display them via mirroring from the iPad 2 or better or the iPhone 4S.
    You cannot AirPlay to 2 Apple TV 2's at the same time from an iOS device. You can watch the same video, TV show or listen to the same music from your iTunes library on multiple Apple TV's at the same time.

  • Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

    Using a mac book pro !
    Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

    Good question bigboggerchoot.  I also would like to know the answer to this.

  • I cannot connect my iPhone 4S to my home wifi. When trying to connect it says I have the wrong password, but I can connect my MacBook to the same network with the same password. I have tried to restart my router, reset my network settings, fail!

    Hello, I am having some major troubles connecting my iPhone 4S to my home wifi. When I try to connect on my phone, it says I have an incorrect password. That's not possible because I can connect my MacBook to the same network with the same password. I have reset my network settings on my phone, reset my router, called apple support, triple checked I was trying it in correctly, I have no clue what's going on.
    The only thing different is I just moved, but I have the same router/phone/internet provider.
    I've seen some discussions of router security options being the problem, I have my router connected to : WPA-PSK [TKIP] + WPA2-PSK [AES].
    The other options are: WEP , WPA-PSK[TKIP] , WPA2-PSK [AES] , WPA/WPA2 Enterprise.
    My troubleshooting and understanding of all this is pretty limited, my applecare service did not help, please can anyone help me?
    Thanks!

    If the issue happened after an update, you may want to go into an Apple Store. Be sure to let them know exactly what's wrong with the device.

  • I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

    i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • Can an Airport extend a wireless network and support a USB printer at the same time?

    Can an Airport extend a wireless network and support a USB printer at the same time?

    Yes, if the AirPort Express is extending the wireless signal produced by another Apple router. The Express cannot wirelessly extend a network produced by a non-Apple router.
    In addition to extending the network and connecting a printer, AirPlay can also be enabled on the AirPort Express, with all services operating simultaneously.
    Please note that only the print function will work if you connect an All-in-One type device to the USB port on the Express. Advanced features like copy, scan, mainentance, etc are not supported when an All-in-One device is connected to the USB port on an AirPort router.

  • I plugged my iphone in for the first time to my itunes account and it now reads that this device is already  associated with an apple id.  what does that mean.  i only have one apple id. and do i chose cancel or transfer?

    i plugged my iphone in for the first time to my itunes account and it now reads that this device is already  associated with an apple id.  what does that mean.  i only have one apple id. and do i chose cancel or transfer?

    Hello there, Shellywms09.
    The following Knowledge Base article points out why you are receiving that message on your iPad:
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

Maybe you are looking for

  • Music in library, but not showing up under "music"

    For some reason, if I click on "Music" I see the screen that you get with a fresh iTunes library, but my music is all still there. How do I fix this screen so I can navigate the music in my library?

  • How to Load file name in to Oracle table column

    hi, I am loading data from flat file(TEST_GRET.DMP) to oracle table. while the Target Oracle table has four coloumns, in which one is File_name. I want to load the FILE NAME into that table too. as there is no ???? how it can be done??? Regards,

  • How restart a database when missing indexdata files

    My database is in archivelog mode. We need to restore it but we don't have the BACKUP containing index datafile, only system and data datafiles. When we open the database, ther is the error ora 01113 AND ORA 01110 and we need to recovery the database

  • Patch NW04s SPS09 Container Web Dynpro is not active

    Hello SDN, I am trying to patch my NW04s SPS08 Portal to SPS09. I get the following error message. I am not able to start the web dynpro container. Has anyone of you an idea whats going on? Thanks. Best Regards, Olaf Reiss Sep 14, 2006 3:39:20 PM  In

  • Modifying a 6i form in 9i and running in 6i

    Hello all forum members, I have a fmb created in forms 6i. I am modifying the visual aspects of the form in forms 9i. After saving the file in forms 9i, can I open it in forms 6i and compile & run in forms 6i? I would be grateful if someone replies t