Apple TV connected to TV and I have blank Screen...
My TV can accesp 720p pictures, howeve, I have a blank screen!
TV is a Sony Bravia KDL-32BX300.
HELP!!!
I get the same blank screen on my Sony TV when connecting to AppleTV. The screen stays blank until I push the big button in the middle of the controler. Then the picture arrives. But then, you have probably already tried this??Right??? Right???
Similar Messages
-
I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?
JayleneC wrote:
Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
As you addressed me that is exactly what I said
Dodgy trimming ?? get a new micro sim from T-Mobile -
Hi I'm from Australia.
If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?Any specific recommendations for a standalone ADSL modem though?
Always a good idea to use the modem that your service provider supplies or recommends....often free....since you know that it will be supported in the event of connection difficulties.
I have made the mistake of choosing the "best" modem based on test reports....only to find out later that the ISP would not offer any support when I was having connection difficulties.
The ISP blamed the modem. The modem support folks blamed the ISP. -
I cannot connect to itunes store but my network connections are fine and I have tried everything on the itunes support site. I just want to authorize my computer. Can anyone help?
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection
As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues. -
My remote for my Apple TV just stopped working and I have tried putting in a new battery, re-pairing the remote, resetting the device by unplugging it, and I checked the infared coming from the remote is working. The light just blinks at me 3 times what else can I try to fix it?
Have you tried unpairing the remote? You do this by pointing your remote at the Apple TV and holding the MENU and Left buttons down together for 6 seconds.
-
Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.
I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta. -
My appstore says cannot connect to iTunes and it shows blank page i tried all advices but there is no result shall give my iPad to the apple store to make it
I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
iPad User Guide for iOS 6
iPad User Guide for iOS 7 -
my iphone says connect to itunes and i have but when i connect it to itunes it wont restore because it says its locked with a password and i dont know the password. what do i do
iOS: Unable to update or restore
-
I bought a iPhone 4 from USA in $749. i did not take a data plan, still the phone is locked, now when apple is selling unlocked phone and I have paid the full amount, will they unlock my phone
AT&T has not as of yet announced any plans to unlock an iPhone that was purchased as locked to them. Whether or not they will do so in the future, only AT&T would know, and they probably will not say unless and until they're ready to make an official announcement. There is nothing Apple can do for you in this matter unless you are still within the timeframe for returning the iPhone.
Regards. -
hello i was updating my ipod 5 to ios 8 and when it was in the middle of updating it came up that i had to connect to itunes and i have done so and its telling me to restore it and i have tried many time to and its not working. So what to i do??
What exactly happens when you try to restore via iTunes?
Error messages? -
Hello! I want to sell my iphone 3g because i have 3gs- i cleared the info in settings and now have black screen saying no service and usb port pointing to itunes - is that all i do ? i am pretty ignorant of computers- lol- i had read that i need to plug it back into itunes to verify it has all cleared out- i want to sell it on craigs list or ebay- i am really hurting for money right now- all your answers appreciated...
It needs to be restored by someone. You can do it, and set it up as a new phone, or the buyer can do it.
-
I have been getting emails but recently I switch on and just find blank screen but the app says I am getting mail this is now happened to me twice any ideas?
Quit mail like this.
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally. -
iphone 4s keeps beeping when plugged in i have blank screen but itunes recognizes it but cant allow access because of the blank screen
As your iPhone is getting connected to iTunes take a backup of your iPhone in iTunes : http://support.apple.com/kb/ht1766
And then Restore your iPhone to Factory settings and see if it works and if that doesn't fix the problem then there might be something wrong with the Hardware and you will have to take your iphone to Nearest Apple Genius Bar.
Restore iPhone : http://support.apple.com/kb/ht1414 -
I have blank screen, after windows 8.1 upgrade on HP Pavillion 15-e005sv.
I have blank screen, only mouse pointer working after
windows 8.1 upgrade on HP Pavillion 15-e005sv.
Any help please.
This question was solved.
View Solution.First of all you need to get into safemode
for that press f8 or del key while starting the computer
then you will get many options there you must go to safemode
Secondly ,after getting to safemode go to 1.control panel ->2.Device Manager->3.Disable AMD HD Graphics
Thats all
then restart your computer to get into normal mode
May be if you upgrade your amd hd driver your black screen problem will be gone
Maybe you are looking for
-
ITunes is not picking up my iPhone or iPad when I connect (it does see my Nano)
Not sure what happened but in the last week, iTunes won't pick-up my iPhone or iPad under "devices" when I connect to my Mac. I have not been able to sync either device or update their software. iTunes is picking up my Nano and iPod Shuffle.
-
How to redeploy Calculation Manager Web Application Server
Hi All, I am installing a patch(13925741) for Calculation Manager, i stuck at the following point: 6. Perform the standard Calculation Manager Web application server deployment task using Hyperion Enterprise Performance Management System Configurator
-
Loading and unloading xml galleries
I have a several galleries that I will be loading via several xml files. Gallery1 will load on start and the other galleries will load through buttons using their instance names (i.e. "gallery3" button will load "gallery3.xml"). Currently I have a
-
How do I effectively use my Object Libraries ?
I have created a generic form which allows users to search a name in a database table. I have created an Object Libarary and added the Blocks, Canvas, etc. to this OLB file. My concern is reusing this object in several applications without having to
-
To use the "Users & Groups" preferences pane, System Preferences must quit and reopen.
When I try to access some of the system preferences in Mavericks I get an error pane that states "To use the "Users & Groups" preferences pane, System Preferences must quit and reopen." Has anybody had this problem and if so what is the fix?