Apple TV connecting problem?

I bought a Apple TV ( Part number: MD199X/A) and Kanex airplay mirroring for VGA V2-CAF (Part number: H9139VC/B). My TV has VGA input. I connected HDMI from Apple TV to VGA from TV. But the error message "out of range" was showed on the screen.
How can I fix this issue?

FYI: This is a user forum, you are not addressing Apple.
If you were told that it would definitely work then that isn't correct information. It may work, but there is no guarantee because Apple TV is only designed for HDMI (the requirements are stated on the box), anything else will not be supported nor guaranteed. As you see the other one, connecting with HDMI, is working.
Like I said, even if this unit (with VGA adapter) started to work you would be unable to use Apple TV to stream any protected content, and as it is not supported it could stop working at any time.

Similar Messages

  • Apple tv connection problems connection manager :: invoke:: failed to find service

    HELP THIS IS WHAT I GET WHEN TRYINF TO LOG INTO APPLE TV:
    apple tv connection problems connection manager :: invoke:: failed to find service

    Check over on the right side of the thread here under More Like This. Look for one that has a green checkmark which means it is answered. I have read of this however, I do not know how to solve it. It seems as though it is one particular carrier this happens to.

  • Apple TV connection problem + Time Capsule

    Hi there, I seriously need your help because I don't know what else I can do.
    Here's the situation: if I want to sync a single movie (let's say about 1.3 gig in size) to my Apple TV (connected via wireless to my Time Capsule) from my iMac (also connected via Airport), everything goes wrong. I just click on sync in iTunes, see the progress bar slowly going up and as soon as it reach 40%, it just stops sending the data. I check iStat in dashboard just to realize my computer is neither sending nor receiving any data! I then open Safari and not a single web page will load. I then switch back to iTunes, click on the little X to cancel the sync and after 30 seconds, the Apple TV dissapears from the list and the only way I get back my internet is by going to my Time Capsule, pull the plug and reset it. I then get back my internet but I'm still not able to sync my movie to my Apple TV.
    I tried reseting my computer, reseting the Apple TV, repair permission, trash itunes preferences nothing seems to be working. I don't know what else to do.
    Thank you for your help!

    I wish I had a solutipn for you... I am having a similar problem which started in the last two days with my playstation not finding the network from the TC, although the AT! and everything else in the house can find it just fine. The connection in the AT1 is spotty. I wonder if setting the TC to "internet robustness" will help or hurt? I just tried that and will let you know if it helps. Also, often, the syncing stops and does not complete between our iMac (i7 processor) and our AT1.

  • Time Capsule with Apple TV - Connectivity problem

    I excanged my Airport Extreme to a Time Capsule. I copied all settings of the Air port Extreme as suggested by the installation process of the time capsule. Now my Apple TV does not work with eathernet anymore. Apple TV shows that it has a connection but the port on time capsule where the cable is connected to Apple TV is not illuminating. What is the problem?

    You need to tell us a bit more..
    But the whole network should be..
    Modem---TC in router mode .. wireless and wired clients.
    or
    Modem/Router----TC in bridge mode... wireless and wired clients.
    How was the Airport setup?
    I recommend you redo the setup and not use the setup from the airport. Start again and run the setup so you have the TC in the right mode.
    If you use Lion.. download and install the 5.6 airport utility (just ignore v6.. the two can live side by side).. 5.6 is a real utility.. a tool. .v6 is a toy.
    http://support.apple.com/kb/DL1482

  • Latest Apple TV connection problems

    Hi, my Apple TV isn't connecting to my TV anymore.  My LG TV is responding with "no signal".  I've tried disconnecting all the power for a minute and restarting but still no luck.  Can you help?

    It is now just showing the screen saver photos. I can't get into the menu options.  Can you assist with this?

  • Wrt100 and apple macbook connection problem

    We have a WRT100 and having problems getting the mac to stay connected.
    No problems with a Dell laptop. 2 Sony PS3s, Tivo HD, but after a few minutes
    online the mac just loses connectivity. Any suggestions?

    I was having the same problem. This is what I did to solve the problem. Went into the Basic Wireless Settings and: 1. changed Network mode to G only. 2. Which disabled radio band and wide channel options 3. Set Standard Channel to 11 instead of Auto. Not sure which one of these fixed the problem but my powerbook stays connected now.

  • Apple TV Connection Problems

    I have a second generation iPad and an Apple TV that we use to play videos at our museum.  We play the videos on the paid Video Player by Zhengyang Liu.  However, ever since I updated to iOS 7.1.2, the Apple TV drops the video (i.e. won't play the video on repeat) and returns to the homescreen.  If I click on another video (we offer multiple videos to our guests), it will play that video and then stop, despite the fact that the app is turned onto repeat.
    I first thought it was either the Firewall at our institution (it was keeping the Apple TV from updating), but that issue has been resolved and no change has occured with the video player.
    THEN, I thought it was the app, so I've tired a variety of other apps (Viloop, Vloop, VTS Player, Vimeo).  Either the video doesn't play through the app to the Apple TV or I can't upload the videos I want (without paying a bunch of $$$ or for some other, unknown reason).
    Does anyone have any advice to why the Apple TV is doing this, or a better video app that I could utilize?  I want to provide our visitors the opportunity to select the video they want, so the player needs to display the options.  BUT, it also needs to allow me to lock it in guided-access mode so I don't have visitors surfing the web.

    Most likely the App isn't updated for ios7  
    Why not try the built in video app?  upload the videos to the iMovie player and use that.

  • Revert to Factory Settings solved connection problems. Any chance for 3.0?

    After trying everything else I could think of to resolve my Apple TV connectivity problems, I resorted to a Factory Reset. Presto!, my Apple TV now streams music like it used to, flawlessly. I miss YouTube, the other new features and the interface that comes with the upgrade to Apple TV 3.0, but I'm afraid I'll once again lose my ability to stream music (which is currently the most important use of Apple TV in my house).
    Before I attempt reinstalling Apple 3.0 again, I was wondering if anyone else has insight on this. Is there anything different about going directly from Apple TV 1.0 to Apple TV 3.0 that might have been fouled up when going from 1.0 to 2.0 to 3.0? I wonder if the incremental upgrades left "baggage" that was somehow incompatible with each other.
    Any insight or advice is appreciated.
    John

    Is there anything different about going directly from Apple TV 1.0 to Apple TV 3.0 that might have been fouled up when going from 1.0 to 2.0 to 3.0? I wonder if the incremental upgrades left "baggage" that was somehow incompatible with each other.
    Yes that's quite possible, it can occur on a mac/pc, so why not the tv. If a file becomes corrupt it may not be able to be overwritten during an update.
    I'm quite religious about my maintenance and update procedures, and although there isn't really much maintenance that one can do to the tv, I do update my tv as below:
    My routine is:
    0. Check for itunes updates and update if available.
    1. Perform a sync of your library.
    2. Remove ALL cables (for around 30 seconds)
    3. Swap HDMI cables for component were possible.
    4. Go to itunes prefs and check 'Prevent...from auto syncing'
    5. Restart the tv.
    6. Download and install the update.
    7. Restart itunes.
    8. Re-enable autosyncing in itunes.
    9. Manually resync your library if autosyncing hasn't already done so.
    Whether it helps or not, I have no way of knowing, but I will say I haven't had any issues with any of my 5 tv's.
    Of course it may well be a case of something in the updated software that doesn't agree with your current network/security configuration.

  • Has Apple fixed the problem with 4G cellular connection?

    Has Apple fixed the problem with 4G cellular connection on the iPad 3?

    Cellular connection problem was for US connection in Houston, Texas.  Have an iPad 2 which functions perfectely on Wi-Fi or 3G.  Bought an iPad 3 strictly to get the increased speed from the 4G LTE connection.  Purchased on with the AT &T cellular.  Wi-Fi functions fine, but 4G LTE connection is terrible when it connects at all.  Went to AT&T and they said no problems with service in my area, but never get over 2 bars and most times, Web pages load very slow or will hang and not load at all.  Went to the Apple store and they said it was AT&T network problem and went to AT&T and they said no problems with their service.  Went to the Apple communities forum here and discovered that many people were having the same problems with the 4G LTE cellular connection on their iPad 3's.  Didn't seem to matter if it was AT&T or Verizon.  So I decided that I would just return the unit and wait for Apple to fix the problem.  Hence my question.
    Appreciate very much your time in responding to my question.

  • When is Apple going to fix Yosemite's internet connection problem

    Is Apple going to fix Yosemite"s internet connection problem?

    Nobody here knows any more than you do about what Apple is going to do. If you want help from other end users with your problem, you'll have to describe it in more detail.

  • I finished a photo book and now since days I can't buy it because there seems to be connection problem with apple shop. What can I do??

    i finished a photo book and now since days I can't buy it because there seems to be connection problem with apple shop. What can I do??

    In the iPhoto preferences verify that yo have the correct print products country selected.
    Do you have any firewire software such as Little Snitch?
    Is your internet connection working ok?
    LN

  • My phone is being a real pain! Time doesn't work, can't sign into iMessage and only some apps work! It also kicks me off the wifi! This is not my connections problem, it happens everywhere! Apple is terrible! Phone also freezes a lot!

    My phone is being a real pain! Time doesn't work, can't sign into iMessage and only some apps work! It also kicks me off the wifi! This is not my connections problem, it happens everywhere! Apple is terrible! Phone also freezes! What should I do!?

    Did you try the basics from the manual?
    Restart, reset, restore

  • Has anyone experienced internet connection problems through Comcast after taking a recent Apple security download?

    Has anyone experienced internet connection problems through Comcast after taking a recent security update download from Apple??

    Hello jessie029, and a warm welcome to the forums!
    What browser do you connect with?
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then Open System Preferences>Network>Configure>Proxies Tab, make sure none are set, like for HTTP & HTTPS to use at Home, if you use it at 2 locations, just make a New Location for home.
    Make a New Location, Using network locations in Mac OS X ...
    http://docs.info.apple.com/article.html?artnum=106653
    Then try putting these numbers in Network>TCP/IP>DNS Servers for the Interface you're using...
    208.67.222.222
    208.67.220.220
    Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
    https://www.opendns.com/homenetwork/start/device/apple-osx-tige
    How to Flush DNS in Mac OSX using the Terminal.
    In Mac OSX versions 10.5.1 and before, the command lookupd -flushcache performs this task:
    lookupd -flushcache
    Reboot.

  • When i enter my apple id into i message it says it has a network connection problem even though it has full internet?

    when i enter my apple id into i message it says it has a network connection problem even though it has full internet?What can I do???

    See my response to one or your three posts.

  • HT1688 my iphone is having connection problems how do i get my free bumper from apple?\

    my iphone4s is having connection problems how do i get my free bumper from apple?\

    nicoleking wrote:
    ... I heard that if you bring in your old iPhone, they will give you a new one with some kind of fee, but I don't know how that works.
    https://discussions.apple.com/message/22920500

Maybe you are looking for

  • Unix command in Report Builder

    Is it possible to use UNIX command in Report builder because I am trying to move one file in UNIX directory to some other directory in UNIX also. Thanks Shishu Paul Chandigarh

  • Need Mojo to tangle with site support

    Dear Robopeople, In October 2006, I published a major project with 450 topics to the company shared drive, and had very few problems with the functions of RoboHelp X5, or the WebHelp system I published. In January, I migrated a few paper manuals to W

  • TopLink exceptions

    When I am adding a new object to the existing Toplink map and while creating Java objects from existing tables, I am getting the following exception and Java object creation process is stuck and I have to exit the Jdeveloper by terminating the proces

  • Error alert

    I just had the following alert pop-up in mailbox. I have just started to administer the IronPort so i'm pretty "new" on troubleshooting the device. The error is: An application fault occurred: ('python2.5/posixpath.py exists|171', "<type>", 'stat() a

  • When trying to update and app, I get an error message

    When I try to install it, a message appears saying there is a problem with a family members previous purchase Not sure what this means? Thanks for any input!