Apple TV connecting to analog port

Hello: If the new Apple TV don't have AUDIO/VIDEO ports can you connect the new apple TV with a TV without HDMI connection?
Thanks

Not unless you can find an HDMI to analogue signal convertor or perhaps using a downsampled video output from an HDMI equipped AV reciever.
Any convertors are likely to be quite expensive.

Similar Messages

How to connect apple tv when the hdmi port on my tv is connected to the hdmi modem

I just got at&t uverse tv service. The modem is connected to the hdmi port on my tv. I bought a 4 in 1 out hdmi connector box, but don't know if this will work. I've tried plugging the apple tv into one of the in ports, but I can't get it to work. I've tried plugging both the modem and the tv into the out box and other components into the in ports, but it hasn't worked.
Has anyone ever run into this problem where the tv hdmi port is used and apple tv requires an hdmi port?
thanks,
Joan

I use this device as my 4 splitter and i get connection all devices working then after a few hours i get an error. can i get some direction on how to place each device on this one splitter? the Uverse box and TV only has one HDMI plugs, I put the TV HDMI from TV input to splitter Output, then I put Uverse cable in port 1 on the splitter, then appletv in port3.
I need some direction if you can provide any.
https://www.google.com/shopping/product/152784781184241298?espv=2&biw=1280&bih=9 39&output=search&q=rockefish+4+way+hdmi&oq=rockefish+4+way+hdmi&prds=paur:ClkAsK raX8Rp5ts3l9LicxkyVgxiMktOihntNJfwmB3JSZqvmy2QH7nuNb5nXfuEcJKpDd3zJb7pX-FiaKI91u my6-sMyrgCwzZXXyNMD1i-sv0FLb7uvtaHuRIZAFPVH71NyIbBbK6WBgme3K-dFAXePqzVZQ&ei=En34 VL2PG9fsoATe5IGICA&ved=0CPEDEKYrMAA

I have a Comcast system and am going through a Bose amp for sound. The comcast box has an HDMI port which I've used for the Apple TV connection. Nothing works! Help.

have a Comcast system and am going through a Bose amp for sound. The comcast box has an HDMI port which I've used for the Apple TV connection. Nothing works! Help.

Thanks. Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....

Hi everyone. My ipod classic was purchased in the year 2009. I'm unsuccessful in getting it charged either through a USB port of my laptop or through an apple adapter connected to DC. Please suggest me on my options. Thank you.

Hi everyone.
My ipod classic (160 GB) was purchased in the year 2009.
I'm unsuccessful in getting it charged either through a USB port of my laptop or through an apple adapter connected to DC.
Please suggest me on my options. Thank you.

Could be the battery. The following has cost and other information that may help: Apple - Support - Service Answer Center

I connected my apple tv2 to my dvi port and all I see is the apple logo

I connected my Apple TV2 to my dvi port on my HDTV and all I see is the apple logo on the screen. I keep pushing menu on the apple remote and i see a white led turn on and off but the apple logo continues to be the only thing on the screen. I expect to see a menu as the apple manual indicates should appear on the screen. What's it gonna take for the menu to appear and the product to operate as expected?

Use the search function here to look at DVI problems. Even IF a HDMI --> DVI cable worked, there still won't be any sound. Apple doesn't seem to want to make the ATV2 work with anything less than HDMI. And it's pretty clear on their Apple store that the ONLY output is HDMI. IF your HDTV has limited HDMI ports, you might want to thing about switching one of your other inputs.

"Device connected to USB port has malfunctioned and is not recognized"

When I hooked my nano up to my computer today, the screen went black with a silver apple icon on it...it's still all lite up and on...but it won't change from that screen.
And my computer says, "Device connected to USB port has malfunctioned and is not recognized", so it won't show up in iTunes.
What do I do?? Thanks.
Windows

iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

How do I print pictures from a disc inserted into the Apple Superdrive connected to the 2011 MacBook Air?

How do i print pictures from a disc inserted into the Apple Superdrive connected to the 2011 MacBook Air by USB port? Thanks

How do i import them? The only place i can find them is on "Finder" and I don't know how to get them to a place where I can print them.

Connect iMac MiniDisplay port to VGA or composite projector, PLEASE!??

I have an iMac and an Epson Powerlite 77c projector I am wanting to link up. I need to go from the minidisplay port in the back of the imac to either composite or vga (female) connection. Apple has a minidisplay to vga adapter which i'm assuming will work.
Epson Projector connections - VGA (female,) Video and audio in (composite), S-video
iMac display connections- Mini display port
Would it be better to use vga or composite for watching movies and using the computer through the projector?
And...if i am thinking of the correct cable i'm also going to need an extension to actually get to the monitor. Since the minidisplay to vga cable is female and so is the vga input on the projector, Is there such thing as male-male vga cable and would it send the signal properly from the imac to the projector?
Is there any other way to link these two devices up? Component switch or wireless transmitter?
Thanks

Apple has a minidisplay to vga adapter which i'm assuming will work.
Yes, it will work fine!
Would it be better to use vga or composite for watching movies and using the computer through the projector?
The iMac is not able to connect via composite cable at all. VGA, Mini Display Port, and HDMI (through adapter) are the only types of cabling that will work. Keep in mind that composite is the absolute WORST video quality you could hope for. Here is the scale from worst to best...
Composite, S Video, Component, VGA, DVI/HDMI/MDP (these last 3 are essentially the same quality)
Is there such thing as male-male vga cable and would it send the signal properly from the imac to the projector?
Yes, they are extremely common, and it will work fine. I would be surprised if there wasn't an extra cable of this sort already in the projector bag. It is standard gear for all of my office's projector sets.
Is there any other way to link these two devices up? Component switch or wireless transmitter?
The best connection you can make with the powerlite 77c is through VGA.

Would connecting the HDMI port of my 15 Macbook Pro Retina to the DVI input port on my Dell UltraSharp 2434 LED HD Monitor work?

Would connecting the HDMI port of my 15 Macbook Pro Retina to the DVI input port on my Dell UltraSharp 2434 LED HD Monitor work?

Hi Wizard0705,
If you have questions about connecting an external display to your MacBook Pro, you may find the following article helpful:
Apple Support: How to use multiple displays with your Mac
http://support.apple.com/kb/HT5019
Regards,
- Brenden

HT202731 Macbook air 2014 model screen flickers when ever it is connected to minidisplay port to vga adapter?

Macbook air 2014 model screen flickers when ever it is connected to minidisplay port to vga adapter?

Hello EmPuah,
The article linked below details a number of troubleshooting steps that can help resolve issues with your display.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/en-us/HT201177
Cheers,
Allen

HT202731 Unstable operation when 2 or more USB devices connected to usb port on a MacBook Pro running Yosemite

I have tried connecting a number of devices to my MacBook Pro but I have found if I try to connect 2 or more using either usb ports or a usb hub the computer reports 'disk not ejected properly' and sometimes it will fail to recognise the device and remove it from the desktop or it stalls operation and I have to turn the computer off at the power button.
I have tried erasing the hard drive and reinstalling the operating system.
I have done various types of reset suggested by apple support.
The computer has been to an Apple dealer who has tested the hardware but found nothing due to the intermittent nature of the problem.
I have operated the computer with only the software originally installed on it present.
Could it be possible that a virus could be present on the usb devices I am trying to connect?
My computer is a MacBook Pro (13-inch, Mid 2012)
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Startup Disk Macintosh HD
Graphics Intel HD Graphics 4000 1024 MB
Operating System X Yosemite 10.10.1
Devices I have connected to USB ports all USB 3.0 compatible in a variety of combinations:-
7 port superspeed USB 3.0 hub (powered).
4 port Inateck USB 3.0 portable hub (not powered).
Buffalo ultra portable 500Gb USB 3.0 hard drive.
Seagate Expansion portable 500Gb USB 3.0 hard drive.
Seagate Expansion desktop 2Tb USB 3.0 hard drive (powered).
Seagate Expansion desktop 3Tb USB 3.0 hard drive (powered).
ScanDisk Cruiser Edge 16Gb USB stick.
ScanDisk Cruiser Edge 32Gb USB stick.
Hewlett Packard 16Gb USB stick. (This causes an instant crash now.)

Why?
- Because when I'm editing/ rendering lots of HD video everyday, I don't want to share system resources between virtual machines... I want the entire system's resources devoted to what I'm doing.
- I don't want to spend anymore money than I have to in order to buy one of the faster virtual systems. Not to mention, I've had a bad experience with Parralels in the past and I'd rather not use one again.
- I really don't want to clutter up my system anymore than I have to for a project that's only going to take a few weeks.
- I don't mind swapping hard drives... it takes two minutes, and I have an empty ssd just sitting on the shelf.
So, back to my original question. Can I just swap the computer's drives, then install Ubuntu on the second drive and be good to go without any harm to my MacBook Pro or OSX on the other drive (which wouldn't be connected when Ubuntu is running)?
Thanks.

I have an apple G5 connected by Wifi to two Bang

I have an Apple G5 connected with Airplay to two sound system Bang & Olufsen. The wifi connection is good but the music stops while paying. What can I do?

Ok, thank you for the updates. Both base stations should be configured for a roaming type of extended network. Please refer to the link I provided earlier for the correct setup.
The basic requirements for a roaming network are:
The base station must be interconnected by Ethernet. (Your's is already.) Note: Connect the Ethernet cable between the LAN port of the first base station and the WAN port on the "extending" base station.
Each base station must have a unique base station name.
The "extending" base station must be in bridge mode. (Your's is already.)
Each base station must use the same wireless network name, security type, and password.
With both base stations in a roaming configuration, each will have its respective Ethernet ports active, and both, will be broadcasting it own Wi-Fi network ... but those wireless networks will have the same name (aka, SSID) so wireless network client can roam between them.

Apple TV connecting to A/V (Niles central system)

We have centralized system w/switch that we feed all A/V too and we want to add the apple TV & remove our DVD,CD, etc? Can we do this?

The apple TV connects directly to your HDTV via HDMI, or by using a switch when you have limited ports.

Is there way to share Air-Port Wi-Fi connection through ethernet port?

I was wondering if anyone could help me out with this, I have wireless network in the building, and is there way to configure Mac Mini to share Air-Port Wi-Fi connection through ethernet port (feed Vonage adapter)?

Have you actually shared wi-fi to ethernet on a Mac? I ask because it is not usually that simple, it is a more complicated configuration. Most folks who do it the way you described get a self assigned IP and nothing connects.
See my comment here;
http://discussions.apple.com/thread.jspa?messageID=12585788&#12585788
I have a Vonage phone adapter and Vonage does not provide the info that you need to hand configure these boxes, I have tried in the past with the one I have with a US phone number from here in Mexico.
Dah•veed

Apple TV connecting to analog port

Similar Messages

Maybe you are looking for