Apple TV connection lost after trying to install Sonos bridge

I inadvertently deleted my network name (clicked on "forget network") while trying to install Sonos. Now it appears to be lost and I have lost my connection to apple tv through my airport.

Try restarting your router.

Similar Messages

  • HT1199 After trying to install window 7 my new iMac will not reboot back to apple. Black screen "No bootable device -- insert boot disk and press any key". How do I get out of this?

    After trying to install Windows 7 in my new iMac It will not boot up back to Apple. I have a black screen with the following "No bootable device -- insert boot disk and press any key". My iMac did not come with a boot disk. What can I do?

    Try holding down the option/alt key during a restart and see if you can see/select your boot drive there.

  • HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    Obviously since you have iOS 7 you're a developer.  As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum.  Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
    Thanks, and best of luck to you.
    GDG

  • MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

    MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

    My daughter's MacBook Pro was doing exactly the same thing.  I don't know if it had anything to do with the latest update.  She called me about a week ago saying that her MacBook began running slower by the day .  She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning.  I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive.  She took it to the Apple store.  Originally, they also thought it was the hard drive.  It ended up being a corrupted operating system (Lion).  Apple genius simply re-installed Lion and she's back up and running.  Good thing she backed up right before it crapped out.  She'll be restoring everything tonight.  Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

  • After trying to install Mavericks, got an error message my hard drive was bad.

    After trying to install Mavericks, got an error message my hard drive was bad.  Took it in to the Apple Store and the 'Genius' bar guy couldn't see it as an external drive when he connected another Macbook. If I get another hard drive what's involved in getting my system operational again?

    Hi there
    Looks like I may be experiencing a similar issue to yours as having issues installing Maverick on snow leopard?
    https://discussions.apple.com/thread/6286238
    Did you manage to get your problems resolved?

  • Itunes wont open after trying to install 11.1.4??

    iTunes will not open after trying to install 11.1.4 version ??

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • After trying to install update on MacAir error message and then message saying panic (cpu caller 0xffffff800a859241): "Unable to find driver for this platform: \"ACPI\".... I'm worried as all of my work is on my computer and I'm afraid I will lose it all.

    I am totally worried I am going ot lose all my data after trying to install update on MacAir.  Cannot do anything error message saying panic ....."Unablet o find driver for this platform."

    Hi Guys
    No good news I'm afraid. I have been through ALL the system caches and files that were updated at the time of said issue. Reset - rebuild and even gone back to my TimeMachine copy from earlier this AM. Nothing! Can only assume it is something deeper in the /usr or var or private folders.....
    I have cloned the system and core files (/usr, /private) etc etc to an external HD and it still recreates the fault. I am afraid to say I have no more time at the minute to look at so have put my machine back to 2 hours prior via my TimeCapsule.
    I the absense of anyone else or, indeed, Apple fixing in the next 12 hours, will get back onto it from the cloned copy I have kept and see if I can find the offending file/files...
    Sorry I don't have an immedaite solution.

  • Error 7 windows error 126 after trying to install the latest update

    error 7 windows error 126 after trying to install the latest update

    See Here
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    If the device has been modified, this will not necessarily work.

  • After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work

    While trying to install my (less than 2 year old) HP6500 Wireless all-in-one software on my 3rd networked computer, the software installation went into a loop and would not complete the installation.  After about an hour or so of waiting, I physically had to unplug the printer & eject the CD. Upon doing so, the printer became next to useless. The printer key pad no longer functions except when I first plug it in, and I can no longer access it from the other 2 original computers, even with USB.  The HP solution center says it’s on line, until I go to print via USB, then it says it’s offline. I can hook the USB up on the Widows 7 unit and force it to print Word Office documents, but when I try to print documents on it from either Internet Explorer or Fire Fox it wants to send a Fax??? I've uninstalled and reinstalled the software 3 times on my Windows 7 unit now to no avail. Is it my printer, the printer Firmware or what?  I have downloaded and run all the HP & Microsoft troubleshooting tools on the Windows 7 unit to no avail.  However; HP downloads will not successfully complete on my XP unit.  What should I do? Should I start over with a new wireless printer?
    Totally Confuzed

    Re: After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work
    Ref: 02-23-2012 08:53 AM
    12:38 AM 2/24/2012 UPDATE ON WHAT I HAVE TRIED AGAIN: 
    1. Power Reset on the Printer: Power off the printer. Unplug the power cable from the back of the unit. Wait 60 seconds. Replug the power cable to the printer and power it on. DONE
     2. Print a test page: Follow this document to print the test page. PRINTER SCREEN SAYS IT'S PRINTING AND THE POWER LIGHT IS FLASHING LIKE IT'S BUSY, BUT NOTHING IS HAPPENING. ONLY WAY TO USE IT NOW IS TO UNPLUG IT AND START OVER. THIS HAPPENS ALL THE TIME NOW. IT WILL NOT PRINT TEST REPORTS.
     3. Create a copy of the printed test page. CANNOT DO NOW - (PRINTER FREEZES UP WITH A BLINKING POWER LIGHT)
     4. Print the Wireless Network Test Report (To check if there are any errors) CANNOT DO
    Press the Setup button ( ). DOESN'T WORK EXCEPT MOMENTARILY...NOT LONG ENOUGH TO MAKE A SELECTION BEFORE IT HANGS AND FREEZES UP...
    Press the Right Arrow button ( ) to select Network Setup, and then press the OK button. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
    Press the Right Arrow button ( ) to select Wireless Network Test , and then press the OK button. The Wireless Network Test Report prints. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
    If you did not encounter any errors while performing the steps above then I think the hardware is OK. Test the software next. Let's use Windows 7 as the test platform. I DON'T THINK THE HARDWARE IS OK.
    1. Download the driver from HP.com. Once it gives you the option to either Run or Save make sure to select Save and then select Desktop as the target location where it will save the file. This is just to make it easier to find it. Once it finishes downloading the file, double click it to initiate the installation process. Follow the on screen instructions until you reach the "select how you want to connect the printer" window comes up. I ALREADY HAVE 3 COPIES ON MY DESKTOP & NONE OF THEM REACT ANY DIFFERENTLY.
     2. At the "select how you want to connect the printer" window select USB and then click Next (I think there is a next button). It should asks you to connect your printer but we are NOT going to do that. Place a checkmark on the option on the bottom of the window that gives you the option to bypass the connection phase of the installation. Click Next to proceed. Once the the installation process completes, restart your computer. I HAVE DONE IT BOTH WAYS BEFORE AND CANNOT GET THE INSTALLATION TO COMPLETE ON ANY OF THE 3 COMPUTERS NOW.
     If you did not encounter any errors at this point then it looks like the software installation process is good. Proceed to the next test. END OF TEST FOR TONIGHT. THANKS
    1. After the computer completely boots up, connect the USB cable to the printer and to the computer. The computer should detect the printer and initiate the HP installation process for it. Follow the onscreen instructions to complete the install.
    2. Try printing to test functionality.

  • How to stop the spinning  ball after trying to install 10.7.3?How

    How to stop the spinning ball after trying to install V10.7.3?

    Boot from your recovery partition by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    When the Recovery desktop appears, reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • Ipod won't work after trying to install Paid 2.0 update

    I bought the 2.0 update for my 16 gig ipod touch. After trying to install the update through itunes half way through the update it gave me the message "The ipod could not be restored. An Unknown error occured (6)." I tried to do a restore on the ipod it it does the same thing. Can anyone help? Now after paying for an update I have an ipod that doesn't work at all.
    I tried doing a restore using the old software on a different itunes library and get the same error message.
    Any suggestions?
    Thanks Larry

    lukemichael wrote:
    ok i have figured out how to fix this problem!! it is simple. make a new account on your computer. Now use the itunes on that account and just plug ur touch in and restore it. It will restore it to the software 1.1.4 . now just go back to your main account on ur computer and plug ur touch in once again and it will restore it to its original settings and sync all your songs and videos and the rest.
    I followed the above instructions. Let Itunes 7.7 set itself up on the new account and downloaded the update. The first attempt didnt work but the second attempt after I rebooted the PC I logged in on the new user and booted up Itunes.
    When that had finished faffing about I connected the USB cable into another USB port (above the one its just come out of if you get my drift) and it started extracting the software for Restore then it started prparing the ipod for for restore and then started uploading the software to the ipod in which it had not done it before. As I type it has just finished synching the ipod with my current Itunes library on my default windows account.
    I am running the update but will have to enter my contacts details again but hey thats no big deal.
    So I hope you all get yours to work.
    Cheers
    Hentis

  • ITunes is giving me a runtime error and won't load after trying to install update

    After trying to install the latest update to iTunes my iTunes will no longer work. I've tried uninstalling and re-downloading and still get the same runtime error

    Hello Scottee2hottee,
    Thanks for using Apple Support Communities.
    it may be necessary to remove all traces of iTunes and related software components from your computer before reinstalling iTunes.
    For more information on this, take a look at:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    1. Remove iTunes and related components from the Control Panel
    2. Verify iTunes and related components are completely uninstalled
    3. Reinstall iTunes and related components
    Best of luck,
    Mario

  • I have windows vista and I'm receiving a runtime error message R6034 after trying to install latest update of itunes.  How do I resolve this issue?

    I have windows vista and I'm receiving a runtime error message R6034 after trying to install latest update of itunes.  How do I resolve this issue?

    The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562

  • Safari crashed after trying to install winebottler

    Why safari crashed after trying to install winebottler? 
    IT doesnt open

    Hi Lineman7th,
    Welcome to the Support Communities!  There is a possibility you may have downloaded some type of adware or malware.  Take a look at the information in the link below if you are having issues with Safari:
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
    http://support.apple.com/en-us/HT203987
    I hope this information helps ....
    - Judy

  • Mac won't power up after trying Leopard install.  Black screen of death.

    After trying to install an upgrade from Tiger, the installer said that if I wanted to continue, it would install a new volume and erase all my data. That sounded bad, so I hit cancel and chose quit installer from the menu bar. My mac asked which OS I wanted to use to restart my computer, and naturally I chose Tiger, not Leopard. My mac tried to restart and I got the apple logo and the little wheel spinning and then...off. Shut Down. Happens every time I hit the power button. Logo, wheel, off. I was on the phone with apple support for 2 hours and they sent me to a store finally. There they said it was a problem with file corruption on my computer. Not Leopard. They said they were having no problems with Leopard except for people trying to install it on an older model and similar issues. HELP!

    This doesn't sound good at all . . .
    Did the Apple store test your power supply? It would be good
    to know that the basic hardware functions properly.
    And did you try booting from your Tiger install DVD? Assuming
    you can get this far, run Disk Utility from the DVD and check the
    disk - if it finds bad stuff on your disk, and can't fix it, you
    probably do have a corrupted disk. The only solution may be to
    reformat the disk - hope you had a backup copy . . .
    A big guess on my part is this happened when you hit Cancel on
    the install.
    If you have Apple Care (and everyone with a laptop should have
    it), take it to the store, and let them fix it. You'll have a
    nice, clean 10.4.10 on it (or Leopard if you want), and you can
    start over . . . :^(
    Good luck . . .

Maybe you are looking for

  • Changing FX plug in settings for channel strip aliases?

    I've been trying to migrate my live performance rig from Kore 2 to Mainstage 3, and truth be told it has not been easy, nor yet successful.  Every time I overcome one roadblock to something that was so easy to set in Kore, another problem presents it

  • TS1424 Can't activate itunes gift card

    I am receiving an error message prompting me to contact apple support to activate itunes gift card. The card is new and never used.

  • Oracle9i Developer release 2 for Mac OS 10.2

    Oracle 9i was released in August for Mac OS X. The release notes specify as a requirement Mac OS Server 10.2. Does Oracle 9i run on Mac OS 10.2 (as opposed to Mac OS 10.2 Server)? If not, what is missing in Mac OS 10.2?

  • Back ground jobe

    Hi Everybody, I knew the background job name , i want to know here is program name , which is running on background jobe and time. and let me know the way of debugging the back ground job.. which is alredy finished. regards, vinesh.

  • HP OFFICEJET 8500 ALL IN ONE

    WHEN TRYING TO PRINT AN E MAIL I GET A BOX COME UP WHICH SAYS  SCRIPT ERROR 2053 LINE 1N  INVALID PROCEDURE CALL OR ARGUMENT?  DOES ANYONE KNOW WHAT MY PROBLEM IS PLEASE