Apple TV "Could not connect to [my apple ID's]Library

Hi
Since Yosemite I can no longer connect to my apple ID's library for pictures for the Apple TV screen saver (iTunes on, home sharing on, Apple TV and iTunes updated to the latest version, same network, etc.). Solutions?
Thanks!

Apple TV2 is now running perfectly. First I assigned a static IP address to ATV2. But still it disconnected after 1 hour. This brought me the idea to set the renewal time for the WPA key in my router settings to 0 (before it was 3600 seconds). That was it.

Similar Messages

TS3276 Mail Connection Doctor says: "Could not connect to Apple Server's STMP. As Verizon is my ISP is this the right STMP? If yes, how do I connect to Apple Server

When using Mail Connection Doctor two error messages come up with regards to sending and receiving mail from my @mac.com account.
The first one says that my @mac.com account: "Could not connect to this MobileMe IMAP server." How do I fix this? Is this caused by the way I have set my preferences? Is this related to joing iCloud? Or my ISP Verizon the problem?
The second one says in reference to my Apple Server: "Could not connect to this STMP server. Check your network connection and that you entered the correct information in the Account perferences. Also verify that the server supports SSL. If it does not, deselect the "Use SSL checkbox in the Advanced tabe of Account preferences." This box was not checked. Two days ago these problems did not exist. Again, how do I figure out who to discusses these problems with?
Feedback is most welcome.
Sally

Hello:
This may help....
http://www.apple.com/mobileme/transition.html
Barry

My iPhone 5s won't turn off or on it keeps flashing the apple screen on off. When I tried to connect to iTunes on windows 8 computer, it comes up with an error message: iTunes could not connect to this phone. An unknown error occurred OxE8000084

Can anyone help me? My iPhone 5s is flashing the apple screen on and off and I can turn the phone on properly or off. When I connected it to iTunes on my windows 8 computer I got the following message: iTunes could not connect to this phone. An unknown error occurred OxE8000084. Can anyone help me correct this so I can start using my phone again.
Thank you

http://support.apple.com/kb/TS3221

Apple tv could not connect to library

Hi, my apple tv (2nd generation) doesn't connect to my itunes library. It reconizes my computer and my housband from home sharing, his a PC it loads the library, but mine from 3 days now, shows always the same message "apple tv could not connect Ana Carolinaa's library". I did every thing the troubleshoting sugested me, but nothing works. It worked perfectly from 3 weeks and now just don't work!!! Can some one help me please?

I have exactly the same problem. I even remove and install itunes again but it still same. I have the apple tv icon in itunes and can send video or music which is playing in itunes to Apple TV but when I choose from Apple TV to connect to the computer it says: "Apple TV could not to Library" ??
Any idea?

HT1212 after over an hour with two Apple support reps I still cannot restore my Ipad that tells me "Ipad is disabled" I was directed to click install update which took over an hour but it didn't complete saying," ITUNES could not connect w/Ipad..hardwire

How do I restore IPAD functioning after receiving a message stating "Ipad is disabled" Note. user and passcodes are verified as enabled. Also my mfgr serial number was supplied. Downloading latest updates per direction via my HP hardwired to Ipad, failed after an hour with a message "Itunes could not connect w/Ipad because it was locked with passcode!"
thanks, Applesauce42 turning sour.

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

After installed the Lion, my Mac could not connect to internet. At least the my apple Mac turn on second time, then it would connect to the network. Who can tell how to fix it? Thanks!

Since my iMac OSX have installed the Lion last week, my iMac could not connect to the internet in the first turn on, and at least I turn off the computer, and turn it on again, then there is not problem to connect to the internet. So, it take much time to access to network.
Today I called apple store to fix the problem. They rebooted my system with their distance control.By that time, it seems work. But after couple hours later, I turn on my iMac, there is not connection to the network again. I hope someone could help me to solve that problem. Thanks!

I think I would call them back to follow up. As far as they know, everything is fine. But if you call back they can continue from where they were. They usually give a case number either over the phone the first time you called, or in an email later.

Apple pay - watch-"could not connect to apple watch" message.

I have apple pay set up on my 6, iOS 8.3. I am trying to set up apple pay on my apple watch. I keep getting the message "Could not connect to apple watch". My watch is about 4 inches from my phone, it is powered on, and not in Airplane mode (which are the suggestions that show up in the message as well). Any suggestions?

Was getting the same "Could not connect to Apple Watch" message. Then read the comments here. Did a "reset" of the iPhone 5s, meaning I held the two buttons simultaneously until the iPhone restarted. Don't know if the "hard" reset is something different.
So it works, but Bank of America only takes iPhone 6 and 6 Plus. AMEX is working for Apple Pay on 5s and Apple Watch!

Another Problem with my Apple products "iTunes could not connect to this iPhone. This device is no longer connected."

when connect my ipad a my rmbp 15" appears this message "iTunes could not connect to this iPhone. This device is no longer connected." and ipad is connected and disconnected all the time. but when connect the Ipad in my rmbp 13" not have a problem.
Please I need help. i hope not to have another disappointment with apple product.

iTunes could not connect to this iPhone. This device is no longer connected.
iPad 2 7.1.2
iTunes 11.3 (54)
iMac 27 in 10.9.4
Follow these steps to resolve your issue for iPads
Troubleshooting time is about 30 minutes - 1 hour
Step 1
Unplug the usb 2.0 cord from the 27 in iMac and iPad 2 64 GB (or what ever version you have) Power down the iPad
Step 2
Select your HD (Hard Drive) ( I did this form my desk top)
Next select the applications folder, Next right click the iTunes icon and select show package contents, select Contents.
1.     Next select info.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
2.     Next select pkginfo, right click and select move to trash. (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
3.     Next Select version.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
4.     Remove "iTunes" from your dock
5.     From the Finder, choose Go > Go to folder.
6. Type the following and then press Return: /var/db/lockdown
7. Choose View > as Icons.
8. The Finder window should display one or more files with long alphanumeric file names.
9. In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted. Note: Do not delete the Lockdown folder itself.
Delete only the files contained inside the Lockdown folder.
Step 3
Follow the below steps to troubleshoot the issue.
1. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/LaunchDaemons
2. Click Go.
3. Locate the file "com.apple.usbmuxd.plist~orig" and drag it to the Trash. (Do not move the similarly named "com.apple.usbmuxd.plist" file to the Trash.) If you DO NOT HAVE file "com.apple.usbmuxd.plist~orig" I DELETED THE FOLLOWING (com.apple.usb.plist)
4. In the Finder, locate iTunes in the Applications folder and drag it to the Trash. (This will not remove any of your iTunes media or your iTunes library.) You may be presented with the following message “iTunes” can’t be modified or deleted because it’s required by OS X.) Do not worry click ok and proceed troubleshooting
5. Choose Go > Go to Folder. Enter the following location into the text field that appears: /System/Library/Extensions
6. Click Go.
7. Locate the file "AppleMobileDevice.kext" and drag it to the Trash.
8. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/PrivateFrameworks
9. Click Go.
10. Locate the folder "MobileDevice.framework" and drag it to the Trash.
11. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/LaunchDaemons
12. Click Go.
Step 4
Goto your hard drive in the finder
1.     Goto Library
2.     Goto Launch Daemons
3.     Throw this in the trash: com.ghughes.wifisync.root.plist and anything with the words iTunes
4.     Goto Library
5.     Goto Application Support
6.     Throw this in the trash: Wi-Fi Sync (it's an entire folder) and anything with iTunes
Step 5
(Before restart book mark the link command and D). Restart the Mac.
Download iTunes and reinstall it. After the install, connect the 2.0 usb device to the iPad 2 while the unit is still powered off, next connect the 2.0 usb cord to iTunes, power the iPad on. iTunes will read the device and ask to trust device, select continue. Backup the iPad device to the 27 in iMac.
Step 6
Please Rate if it helped you! After that have a cold hard drink and enjoy the day

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?

With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Am gettinI g an error message of apple sync notifer that the entry point sqlite3_3_checkpoint could not be located in the dynamic link library SQLite2.dll/ This message comes up every time I re boot.

getting error message when I boot up of the apple sync notifer that the entry point sqlite3_3 checkpoint could not be located in the dynamic link library SQlite2,dll this message comes up every time I login and I dont know what it means or how to fix and stop the message appearing every time I log in. what does this mean and how do I fic this issue

With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

? fixing apple sync notifier.entry point not found. Entry point split3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Upon computer start up I receive message: procedure entry point split3_wal_checkpoint could not be located in the cynamic link library SQLite3.dll.
Apple Sync Notifier.exe Entry Point not found.
Anyone have solution?

IIRC, This problem happens when you have a piece of software installed that either doesn't properly register the DLL it uses, or is improperly installed. The draw back is that if that software is runnig when you install the Apple software, the DLL is loaded, and the Apple software doesn't install the DLL because it already finds it, so it doesn't need to load it. Now you reboot, and the other software isn't running, and Apple can't find it's DLL, so you get the error.
You have a couple of options. You can find the DLL in your "Program Files"\"Common..." folder tree and copy it to the Apple folder where it is giving you the error, or you could properly register the DLL with your OS so that it knows where to find it when it is needed. Another option which should work is to remove the Apple software which is giving you the error, perform a fresh reboot (possibly into safe mode) and re-install the application before you launch anything else.

How do I eliminate the message when starting up PC - Apple Sync Notifier.exe – Entry Point Not Found – The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Getting the massage when starting up PC - Apple Sync Notifier.exe - Entry Point Not Found - The procedure entry point sqlite_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. How do I eliminate this message?

I'd first try uninstalling and reinstalling your MobileMe control panel, dc. Does that clear the message up?

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams stop

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working". Help!

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

In Win 7 64bit I get the following error upon every reboot. "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library " This happened yesterday, 8/23/2011 after downloading Apple iTunes 10.4.

This happened yesterday, 8/24/2011 after downloading Apple iTunes 10.4. In Win 7 64bit I get the following error upon every reboot. "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Please how do I fix this, Thanks.

In the case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Apple TV "Could not connect to [my apple ID's]Library

Similar Messages

Maybe you are looking for