Apple tv delivers audio over hdmi but mac mini does not, why?

My Apple TV, 3rd Gen, delivers audio and video over one HDMI cable. When I have the Mac mini connected I can get only video and this is very frustrating. Has anyone else encountered this situation and can someone tell me how I can fix it?
I would appreciate positive answers, not all of these "I don't know" or "I'm not sure" that I see everywhere.
Thank you very much!

Have you selected HDMI in System Preferences->Sound->Output?
Also, do you have anything plugged into the Audio Line Out jack of
the Mini.  If so, unplug the device.  On the Mac Mini, pluggng anything
into Line Out disables all other audio outputs.

Similar Messages

  • My new mac mini does not see usb drives, but in hardware info the usb is visible

    my new mac mini does not see usb drives, but in hardware info the usb is visible
    i'tried several usb flash drives even brand new ones, they are visible onder hardware info but they are not on the desktop nor in the finder.
    what is wrong and doe anyone has a solution ?

    It does not show up in disk utility, its only visible through systeminformation.
    When you plug in the USB flash drive and then refresh systeminformation it becomes visible.
    To remove it I shut down the computer because I cannot eject the USB device anywhere.
    After starting up again when I have removed the flash drive it has gone from the systeminfo USB list.
    By the way my USB mouse and keyboard are working fine, I also changed ports of these and they still keep on working so I don't think the USB ports are defect.
    I guess it some kind software problem, and because I'm new to Apple I do not know much about it how to solve this.

  • Help - Mac Mini does not boot after re-install of OS X

    Hi,
    I have a Mac Book Pro and Mac Mini. I needed to reinstall my Mac Mini but lost the install disks. The install disks of the Macbook do not work (machine specific). So what I did was boot the Mac Mini in firewire target mode and installed OS X to it from the Macbook. Worked ok. Except for one thing: The Mac mini does not boot the fresh OS X installation. I get a blinking folder icon with a question mark on top of it.
    I booted from the Mac OS X install disk, repaired disk permissions etc. and tried to use the "Startup Disk" utility to select the hard drive as a boot device. But that utility does not offer me to select the hard disk, it doesn't even show up (while DiskUtility can perfectly see it).
    Any hints for me? I am pretty much stuck right now.
    Thanks

    Well, see, the fact that it wouldn't let you boot from the MacBook install disks should have been your first clue to not try to do it. There's a reason it wouldn't let you. The MacBook install disks contain a version of the OS specific to the MacBook, in order to prevent people doing what you just tried to do (ie, installing the same copy of the OS on multiple machines).
    If you don't have the Mac Mini system disks any more, you'll have to go buy a copy of OS X. You could also ask for help from an Apple Store, if there's one in your area, but I honestly don't know if they would give you new disks. I would think they should (for a small fee), since Mac Mini system disks would be useless to anyone who didn't already own a Mac Mini, but you never know.

  • ITunes on new Mac Mini does not show shared libraries on network or songs on NAS drive

    iTunes on new Mac Mini does not show shared libraries on network or songs on NAS drive
    The latest version of iTunes on a 3-month old Mac Mini (8 gig RAM, OS 10.10.2) does not see any of the shared iTunes libraries on a  MacBookPro (MBP) (OS 10.9.5) and a 14-month old Mac Mini (OS 10.9.5). And a network shared drive/media server does not appear as well. I have a Gigabite Ethernet G4 and on it, the MPB and the "old" mini I can see the various shared music libraries and NAS, but not on the new Mini.
    The little house with a music note inside it that I see on the upper left corner of the iTunes 12.1 window on my MBP does not appear on iTunes 12.1 on the new Mac Mini. I have gone through all the iTunes preferences and can not find where I can turn on this feature. The new Mac Mini is on the local network and I can reach the internet successfully.
    I have been using iTunes since its beginning (still have a PowerTower Pro with a working copy of SoundJam), so I am not a newbie, but this has me baffled.

    May I add, that I gave full rights to the user at the Mac Mini to access and change data on the server drive for ITunes Media.

  • Why my 2006 mac mini does not receive updates

    Why my Apple 2006 mac mini does not receive updates

    To see if you are ready for 10.5, read:
    https://discussions.apple.com/docs/DOC-2275
    To see if you are ready for 10.6, read:
    https://discussions.apple.com/docs/DOC-2455
    To see if you are ready for 10.7, read:
    https://discussions.apple.com/docs/DOC-2465

  • My mac mini does not want to turn on

    my mac mini does not want to turn on

    See this Apple note: http://support.apple.com/kb/HT2622

  • My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

    My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

    Try disconnecting any external devices, especially hard drives
    and try rebooting.
    If that doesn't help, then :
    If you are running Lion, boot to the Recovery HD and run a
    Repair Disk on the OSX partition.
    If Snow Leopard, boot to the installl DVD and run Repair Disk.
    Also, you may want to bookmark this:
    http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
    for future reference.  It is a pretty good explanation of the
    Mac boot process and how to identify where problems may be.

  • Mac mini does not start up after password is given

    Our mac mini is strating up, but when entering the right password there's coming a blue screen and you return to the login where you have to enter your password. Whe are sure we are typing the right password but the mini is not starting up and every time returns to the login user screen.
    OSX 10.4 and not a intel mini.
    Can anyone please help us.

    Hello, first try this...
    "Try Disk Utility
    1. Insert the Mac OS X10.4 Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Mac mini does not recognize external drive

    I have an 80GB external drive full of music files. I disconnected my computer to move to a new house and, with everything re-connected, the mini does not recognize the external drive. I wonder whether it is because the internal drive is nearly full. I have tried restarting the computer, disconnecting and re-connecting the USB cable to the external drive, serching for it with the disk utility, un-pluggin the external drive power cable and re-connecting it, but I'm out of ideas. What might have happened?

    DBG413 wrote:
    Any suggestions on why my XP laptop cannot view the mac info on the HD. 
    you'll have to install e.g. MacDrive or HFS+ for Windows on your winsloth machine.

  • Mac mini does not boot, no video signal, no chime

    My mini "starts" without chime when I press the power button on the back. The fan starts, the light in front goes on and I hear some clicks which could be the hard drive. The screen remains black (no signal) and the mini does not respond to the USB keyboard power button. It does not start when pressing it and will not power down if I press it for any length of time when it is on. Pressing the power button on the back for some time shuts it down.
    Time to get a new one?
    Ingmar

    You can try:
    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Then try booting from your installer DVD. If still no success then you most likely have a hardware failure.

  • MAC Mini does not restart after Yosemite update

    I bought my MAC mini in 2011 and I successfully updated to Mavericks with no problems.  I am not sure why my MAC Mini will not restart after I updated to Yosemite. The completion bar gets stuck around 30%.
    Any help or ideas appreciated 
    Larry

    Okay, this is strange.  I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%.  I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
    Larry

  • Mac Mini does not display HDMI 1080i in full screen on TVs

    I have a 1.66 GHz Intel Core Duo Mac Mini that I am having problems getting video to display 1920 x 1080 @60hz in full screen on my Sony XBR 1080p HDTV. The Mac is connected to the TV via a DVI to HDMI cable. The Mac recognizes the display as a "Sony TV"
    When the Mac first starts up the entire TV screen is filled with the grey Apple startup screen, but when the Mac fully boots and gets to the desktop, the screen has shrunk so that it is slightly off the screen on the left, and has about 80% of the screen filled horizontally and about 90% vertically. I have tried all combinations of the overscan selection on the Mac and on the TV, but they make the image about 120% of the size of the screen so the top, bottom and sides are cut off.
    I have tried 2 different 1080p HDTVs with the Mac Mini and get the same results for both TVs.
    Now here is the thing that makes me believe that there is something funky with the Mac Mini. If I take my 2.16 GHz Macbook Pro 15" Intel Core 2 Duo and plug its DVI display port into the Same DVI to HDMI cable that is connected to the same Sony TV, it displays full screen with no problems.
    What can I do to make my Mac Mini display properly?

    Thanks for the ideas.
    I did as you suggested, but the only 1920x1080 selection shown was one for "NTSC" which I would think is interlaced. This was after a reboot. All of available resolutions are labeled with "NTSC". When I look at the screen resolutions on my MacBook Pro when it is connected to the TV, they are labeled as "Interlaced". On both computers there are no progressive scan selections.
    As an interesting note, regardless of what display resolution I select, the display area on the TV screen remains the same which is about 80% of the screen offset to the left. When "overscan" is selected, this mode enlarges to image to about 120% of the screen and cuts off the menu bar etc. However the MacBook fills about 98% of the screen in "normal" mode.
    If there was a less aggressive Overscan mode or more aggressive normal mode, that would fix the issue.
    Any other ideas on how to adjust this?

  • Mac mini does not recognize M-Audio Fast Track Pro device.

    I recently installed M-Audio Fast Track Pro with the latest driver for (10.9.2). I'm running the OSX mavericks 10.9.2. The installation succeed but once i connected the device and turn it on, my mac does not recognized it and it shows "device not connected" at the system preferences under the M-Audio fast track icon. i tried reinstalled the driver, tried the checking audio midi setup setting (which is still undetected) and tried installed it at my friend's pc (the device works fine).
    Please help me.

    See:
    http://community.m-audio.com/m-audio/topics/os_x_mavericks_fast_track_pro_suppor t

  • Mac mini does not detect apple cinema display

    Hello,
    I have bought new mac mini (late 2012) with OSX 10.9.4 installed on it.
    I have apple cinema display (20"), model: A1038 from before. When i turned on mac mini the display was not detected.
    I also have one Samsung monitor which was detected without problems.
    I tried next steps already:
    - connect only apple cinema display with HDMI to DVI and turn on coomputer
    - connect only apple cinema display with mini displayport to DVI and turn on coomputer
    - connect both displays, went to System preferences -> display and click on 2Detect display"
    nothing works
    Specs of my mac mini:
    mac mini (late 2012)
    processor: 2.5GHz Intel Core i5
    OSX: 10.9.4
    graphics: Intel HD Graphics 4000
    Have anyone idea what is wrong?
    Thanks!
    most22

    Hi there most22,
    You may find the troubleshooting steps in the article below helpful.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    -Griff W. 

  • HT200131 When I connect my MacBook Air to my TV using Apple TV, the audio stays on my MacBook and does not transfer to my TV. Thus the volume is very low when I am watching a Movie on my TV and I have to listen to the volume from my laptop. How can I fix

    When I connect my MacBook to my television using Apple TV the audio stays on the MacBook and doesn't transfer to the TV. How can I make it so I can hear the Movie or Video through my TV's speakers and not my MacBook's?

    This is called "extended desktop mode".  It's an extension of the desktop off to the right (by default) of your MBair screen.  Grab an app and drag it off the right side of your MBair screen and it will appear on the TV.
    To mirror your MBair screen on the TV you can press Command F1.  This will toogle between mirror and extended desktop.
    You can find all the settings in System Preferences > Displays > Arrangement tab.
    Regards,
    Captfred

Maybe you are looking for

  • Landed costs

    Hi All, This is a question on landed costs for imported materials. I have created a PO for an item having a value of INR 650, [ex.rate u2013 48/-] qty u201310. I have created landed costs after a/p invoice. I gave freight amt as 20 usd, customs  valu

  • Has anyone ever succeeded to use the scope_identity() from the LabVIEW DB toolkit ?

    Hi, Using LabVIEW 2014 DS, and MSSQL 2008R2. I have configured a table with identity, so the indexed will be incremented automatically. I am trying to get the ID of the last Insert command that I am using. I am trying to SELECT SCOPE_IDENTITY() but w

  • Photoshop CS and Leopard

    I've read contradictory reports about CS and Leopard. I know Adobe wasn't going to do anything to improve compatibility, but there could have been issues with earlier versions of Leopard. So I'd like to bring this question up again. I gather that CS

  • Selections will not stay selected to be deleted when removing autofill data

    I am trying to delete the autofill bank in my Safari, under the usernames and passwords edit Pan, all the autofill data in the bank is automatically selected (highlighed) but when i click remove All nothing happens, wrong autofill data promts remain.

  • Update 10.5.8 to 10.6

    how can i update 10.5.8 to 10.6 to use the ipod nano 7. generation