Apple tv distorts color on sony trinitron hdtv

I recently installed apple tv to my sony trinitron hdtv;  since installation the color has been distorted on my tv and I've been unable to correct.

only when the appletv is displaying or allways?
have you tried another tv to see if the appletv is defect?

Similar Messages

  • HT4366 my sony bravia HDTV is not a smart tv.  I want to add an apple tv to my cable box and HDTV.  I understand to connect the HDM1 cable from the TV to the back of the apple tv devise but what cables do I use to reconnect back tho the comcast cable box?

    My Sony Bravia HDTV is not a smart TV.  How do I setup connection between the Apple TV, Comcast HD box and the Sony.  I believe the HDM1 cable goes from the Sony to the back of the Apple TV, but what cables connect the Sony back to the Comcast box?

    Welcome to the Apple community.
    The HDMI cable goes from the Apple TV to the TV.

  • Connect Macbook to Sony Bravia HDTV via HDMI?

    I am trying to connect my Macbook to a Sony Bravia HDTV via HDMI, but are unable to get one to recognize the other. I am not sure what the problem is.
    I have the following set up:
    - Macbook 13" (2.16 GHz Intel Core 2, 10.4.11)
    - Apple Mini DVI to DVI adopter
    - 15' DVI to HDMI cable (from monoprice.com, same cable recommended elsewhere in these forums)
    - Sony Bravia KDL46W3000, (Full HD 1920 x 1080 p)
    The Sony tv does not seem to recognise the Mac is connected (and/or vise versa). The screen is just black. Yes, I have tried all 3 of the HDMI inputs on it, Yes, I have set the tv input setting to match the corresponding input jack. HDMI does work on the tv though, as I have a DVD player connected via HDMI and that works fine.
    The Mac Display preference pane does not detect the tv/monitor being connected. I normally use another external LCD monitor with the Macbook via mini DVI to VGA adaptor without any problem. I have tried various solutions others have mentioned for similar problems I found in these forms, such as turning the tv off then on, rebooting the Macbook before connecting, etc. and every other combination.
    An hour on the phone with Sony tech support did not get me anywhere closer other than they say the Mac should recognize the tv as an external monitor.
    Has anyone with a very similar configuration managed to get this to work? Please note, I am well aware that many many people use HDTV's as a external monitor, but this is a Sony Bravia, not a LG, or Samsung, or anything else. Also, it is a Macbook, not a Powerbook or anything else. Also, I am trying to connect via HDMI, and not VGA.
    Any tips or success stories would be appreciated.
    Thanks

    I hooked my Sony .Bravia 40" up to my MacBook with no problem. From your description, it sounds like you may also have a bad DVI->HDMI cable. I'm using the stock Apple miniDVI adaptor mated to my DVI->HDMI cable.
    I was going to go the route you took and use the VGA port on my Bravia, but thought it might limit me to "side" letterboxes since I thought VGA basically stood for 640x480 or 4X3 format. I'm surprised that you get 1920x1080 from a VGA cable. While your picture may be great, by definition I understand high to low video quality in order is...
    HDMI/DVI, Component, s-video, VGA, and lastly, A/V cables.
    My DVI->HDMI cable is a cheapie that I think I bought at Frys. This type of cable is probably getting harder to find as most stuff is straight HDMI now. Anyone thinking of getting a new flat screen should strongly remember to get one with at least 3 HDMI ports unless they are into cable switch-a-roo when connecting various devices. The stock devices today are cable/satellite, Blu-Ray/HD-DVD/DVD and one for the old Mac.

  • Can no longer connect Macbook Pro 10.6.8 to Sony Bravia HDTV with HDMI to Mini DisplayPort cable, Can no longer connect Macbook Pro 10.6.8 to Sony Bravia HDTV with HDMI to Mini DisplayPort cable

    I have a 2011 Macbook Pro 10.6.8 that is not recognized by my Sony Bravia HDTV. What's weird is that the same cable works with my roommates 2012 Macbook Pro. Help please, I would love to watch movies + shows on the big screen!

    I hooked my Sony .Bravia 40" up to my MacBook with no problem. From your description, it sounds like you may also have a bad DVI->HDMI cable. I'm using the stock Apple miniDVI adaptor mated to my DVI->HDMI cable.
    I was going to go the route you took and use the VGA port on my Bravia, but thought it might limit me to "side" letterboxes since I thought VGA basically stood for 640x480 or 4X3 format. I'm surprised that you get 1920x1080 from a VGA cable. While your picture may be great, by definition I understand high to low video quality in order is...
    HDMI/DVI, Component, s-video, VGA, and lastly, A/V cables.
    My DVI->HDMI cable is a cheapie that I think I bought at Frys. This type of cable is probably getting harder to find as most stuff is straight HDMI now. Anyone thinking of getting a new flat screen should strongly remember to get one with at least 3 HDMI ports unless they are into cable switch-a-roo when connecting various devices. The stock devices today are cable/satellite, Blu-Ray/HD-DVD/DVD and one for the old Mac.

  • Connect macbook to a sony trinitron

    i would like to connect my 2008 macbook to my sony trinitron model kv24fs120 (has white, red & white and s video) and use this tv as monitor.
    how can i do this?
    thank you

    http://store.apple.com/us/product/M9320G/A?mco=MzE2OTkyNw
    The video one is the one you need.
    That's how I hook mine up.
    You will lose a lot of video quality though, going from the macbooks screen to this, the macbooks screen is essentially HD.

  • Can I connect to two 24" Sony Trinitron monitors?

    I have two older--obviously--24" Sony Trinitron monitors (GDM-FW900). Can I use both of these in extended desktop mode with the new mini, and if so, at what resolution? And which cables?
    I need two monitors, and hate as much as anything to have a pair that is not matched in size/specs. Since I can't afford to spring for two new monitors now, I'm hoping the Sonys can be used.

    I assume the connections are VGA? Here are the two adapters you'll need to buy.
    http://store.apple.com/us/product/M9320G/A?fnode=MTY1NDA3Ng&mco=MjE0ODQzNQ
    http://store.apple.com/us/product/MB572Z/A?fnode=MTY1NDA3Ng&mco=MjE0ODQ2NQ
    I haven't used dual vga, but I have used dual-DVI to run my 2 24" monitors. It was the same experience I get when I use my Mac Pro on the two monitors. Extended desktop and full resolution. I did have an issue with the mini-displayport to vga adapter...it flashes to black occasionally. I personally haven't trouble shot it any more...but I think if you search the discussions there is more talk about that issue.
    So yes it'll run a regular 2-monitor set up for you...for me adjusting the resolution of the monitors to what I wanted was the biggest issue I ran into and that was easy.
    -Jay

  • Macbook Pro & Sony Trinitron Monitor

    I have both. Now how do I link them up?
    Kind Regards
    Dean Whiston

    More info is always helpful.
    Also posting in the right area is a good idea, this is the Mac Pro area not the MacBook Pro area.
    But I will assume that the Sony Trinitron is an older CRT monitor with a VGA only connection.
    You will need to get a DVI-A to VGA adapter and connect that to the DVI port on the MacBook Pro, then connect that to the external monitor.
    According to Apple the MacBook Pro is shipped with the proper adapter cable, if you lost yours then you can buy a new Apple one for $19.00 at
    http://store.apple.com/us/product/M8754G/A?fnode=MTY1NDA3Ng&mco=MTUzNTg
    or a cheaper one for $1.94 at
    http://www.monoprice.com/products/product.asp?cid=104&cp_id=10419&cs_id=1041903&pid=2396&seq=1&format=2#description
    Then open System Preferences and go to Displays and Detect Displays to activate the other monitor.

  • Connecting G5 with Sony Trinitron Only---Problems

    I am running MediaCentral on my Powermac G5 to turn it into a media center. All I want to do is connect my Sony Trinitron to the G5. I bought the comosite/S-Video adapter from Apple. However, when I plug in my TV, I get absolutely no picture on the screen. I can tell that there is a signal because the lines begin moving on the TV. I know the card is fine because I can plug it into a regular monitor and everything works great. I, of course, can't adjust any settings because things change when you plug in the different monitors. Does anyone know how I can get the display to show up on the television?
    Video Card: Radeon 9650XT
    System: 2.0 X2 G5
    Monitor: 27" Sony Wega Trinitron
    OS: 10.4.8

    Ciao , yes I've the same problem . The connection is up but you see just part of the screen that is outside what you see on your monitor . I tried to set all is possible on MONITOR hardware but no success. The adapter is M9267G/A Apple DVI to Video Adapter Kit. Tks for any support ciao Angelo

  • Can I return my i phone to apple because the color at the edges are gone already after 2 month???

    Can i return my I phone 5 to apple because the color at the edges are gone already after 2 month?

    You only have 30 days to return an iPhone for full refund.  However, you are under warranty, so if you think this is a defect or such, take it into an Apple Store and show them and ask them about it.  If the screen is faulty, they will replace it.

  • How to connect MacBook 2009 to Sony Bravia HDTV?

    Hi everyone!  I received a Sony Bravia HDTV as a gift (lucky me!), and I want to connect my MacBook from 2009 to it so I can stream Netflix movies onto my laptop and watch them on the HDTV.  I have a Mini-DVI port (video out) on the MacBook, and HDMI on the TV.  A couple of questions:
    -  What cable(s) do I need?
    -  Do I need a separate cable for audio?
    -  Has anyone tried to stream Netflix this way (directly from the laptop), and was it successful?
    Thanks so much!
    Denise

    You'll need a Mini-DVI adapter and an HDMI cable from that to your TV. Here's some types of Mini-DVI adapter to HDMI on Amazon.com. http://www.amazon.com/s/ref=nb_sb_ss_i_9_8?url=search-alias%3Delectronics&field- keywords=mini+dvi+to+hdmi+adapter&sprefix=mini+dvi
    When you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate input plugs for audio with the HDMI plug. The Mini-DVI to HDMI doesn't carry audio and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. You'll have to contact Sony support to see if the Bravia has an audio plug that will work with one of the HDMI plugs.

  • When I want to change my desktop pattern, I no longer have access to my iPhoto as a choice. I am just given the Apple pictures and colors. I have OS 10.9.4 on a MacBook Pro.

    When I want to change my desktop pattern, I no longer have access to my iPhoto as a choice. I am just given the Apple pictures and colors. I have OS 10.9.4 on a MacBook Pro. I could always choose any photo in my iPhoto for my desktop, but no longer. This problem is only about a month old and I can't figure out what to do.

    When I want to change my desktop pattern, I no longer have access to my iPhoto as a choice. I am just given the Apple pictures and colors. I have OS 10.9.4 on a MacBook Pro. I could always choose any photo in my iPhoto for my desktop, but no longer. This problem is only about a month old and I can't figure out what to do.

  • Trying to update apple tv (small black box).  how do i do update?  can't find system settings. i see system preferences no mac pro.  does apple tv need to be plugged into hdtv for the update or PC.  If PC, how?

    trying to update apple tv (small black box).  how do i do update?  can't find system settings. i see system preferences no mac pro.  does apple tv need to be plugged into hdtv for the update or PC.  If PC, how?

    You have to do it on the Apple TV itself while it's plugged into a TV so that you can see its screen.
    I quote
    How to update software on your Apple TV (2nd and 3rd generation)
    Learn how to update the software on your Apple TV (2nd and 3rd generation). It's always a good idea to have the latest software on your Apple TV.
    Update your software
    Select Settings > General > Update Software. Apple TV checks for an available update; if one is available, a download message should appear.
    Click Download and Install to start the download process.
    Do not disconnect your Apple TV during the update process. The Apple TV status light may flash slowly during the update and restart process. This is expected behavior.

  • What is required to connect T420s DisplayPort to DVI-D port? (Sony Trinitron)

    Hello.
    My wife and I have recently been watching Netflix movies on our laptop when it occurred to me: why don't we watch this on our 36" screen?  So I went out and purchased a DisplayPort to DVI-D cable.  Hooked it all up, selected the appropriate input on the TV and... nothing.
    I know that I need to choose the appropriate refresh rate and resolution.  My questions are:
    - Is there anything else that I am missing?
    - The NVidia Control Panel is not as intuitive as it could be.  How do I configure NVidia/Windows to enable the DisplayPort?
    Any feedback you can provide would be greatly appreciated.
    CONTEXT
    - Laptop: T420s
    - Cable: DisplayPort to DVI-D (passive)
    - Operating System: Windows 7 (64 bit)
    - graphics chipsets: integrated INTEL chip, and discrete Nvidia NVS 4200M Optimus

    Hi Gamloi7.
    Thank you for taking the time to reply to my posting.
    Config=>Display=>Graphics Card=Nvidia NVS 4200M 
    The T420s laptop has both an integrated GPU and a dedicated GPU.  I have tried using driving the display monitor using both... unfortunately it doesn't work.  All I see on the TV screen is black.
    TESTS PERFORMED
    - I have tried: Laptop (DisplayPort) >> to >> TV (DVI-D)... TV only displays a black screen
    - I have tried: Laptop (VGA) >> to >> TV (DVI-D)... TV only displays a black screen
    ADDITIONAL NOTES
    - Yes I have extended the desktop (via the Win+P shortcut).
    - For both test cases above, I disconnected the cable from the TV and connected it to my monitor to ensure that the signal was working... sure enough the monitor worked as expected
    - as I understand it the Sony Trinitron KV-36HS500 supports: 480p, 1080i, 720p
    - The following schematic is for the back of my TV. Do you happen to know if VGA or DisplayPort are compatible with any other standards?  For example... I don't suppose I can go from VGA or DisplayPort to S-Video ??

  • Puedo utilizar Apple TV en mi pantalla Sony Bravía KDL-40R480B?

    Puedo utilizar Apple TV en mi pantalla Sony Bravía KDL-40R480B?

    Buen día gtaracenaf, 
    Gracias por su mensaje. Si, el reproductor de medios Apple TV puede ser conectado en cualquier puerto HDMI disponible en su televisión, una vez la unidad haya sido conectada es necesario cambiar la función seleccionando en su televisión el puerto utilizado  por medio del botón INPUT.
    Si te fue útil esta solución, favor dar clic al botón que dice ''Aceptar como Solución''.

  • Ipod Video Vs. Apple iPod with color display Dock

    Can someone help me with this question, can the Apple iPod with color display Dock works for the fifth generation ipod???? or just works with the universal Dock???

    Can someone help me with this question, can the Apple iPod with color display Dock works for the fifth generation ipod????
    According to the local Apple Store here, the Color iPod dock (M9868G/A) will work with the 5G iPod but is a "loose fit" as far as the seating in the well goes.

Maybe you are looking for

  • Trackpad and Keyboard Freezes on my Macbook

    I have a spring 2008 model macbook whose keyboard and trackpad will freeze when my macbook gets too hot. Usually before it freezes up the macbook will try, over the course of several minutes, to eject a CD even though there is no CD in the drive. Sho

  • IDVD 7.0.4 crashes while burning disc/image

    When I try to 'burn' my project to disk or 'save as image' iDVD 7.0.4 crashes without any warnings after rendering the menues right at the beginning of the video render. Main video in project is AIC (758x592, Quality: middle, Progressiv/Linear PCM, 4

  • I've been trying to install itunes on windows 7 but apple mobile device will not install

    I've finally managed to narrow the problem down to the following file: C:\Users\xxxxx\AppData\Local\Temp\Rar$DIa0.119\AppleMobileDeviceSupport64.msi: The archive is corrupt this is the file delivered with itunes and it's definitely causing the proble

  • JSP cannot be found in IBM WebSphere 5.1

    Hi, I'm getting the following error in my websphere when I try to execute my index.jsp page: SRVE0026E: [Servlet Error]-[/index.jsp(2,0) /SkinProperties.jsp(0,0) Impossible to read file: /includes/initSkin.jsp sun.io.MalformedInputException]: org.apa

  • Beginner question on labview and transducer

    i'm trying to understand what a transducer does and what labview can do to it. are these assumption correct? 1) with labview, i can change the frequency of sound waves emitted from a ultrasonic transducer. if i want maximum amplitude of the sound wav