Apple TV Do I need to open a port on my router

Do I need to open a port on my cisco router for my ipad to mirror on the tv.
I have internet access on the Apple TV and ipad I just can't mirror

Ports used listed here:
http://support.apple.com/kb/HT2463
(If it doesn't load 1st time refresh the page).

Similar Messages

I have a 2T apple time capsule and router. I bought a Hauppauge WinTV extender which allows regular TV to be broadcasted on a PC. The program allows streaming to a Mac or iPad, iPhone, etc. I need to open a port on the router to allow this to work.

I have a 2T apple time capsule and router. I bought a Hauppauge Win TV extender which allows TV to be broadcasted on a PC. The program allows for the TV to be streamed on a Mac, Iphone, Ipad. I need to access the router set up options to open a port on the router to allow this program to stream the TV to the Mac and Iphone. I do not know how to access the apple time capsule router to change the settings to open a port on the router. help please.

Firstly you do not need to open ports to stream locally.. there is no port block in local LAN.. only WAN to LAN. So there is a good chance it is not needed at all..
Opening ports on the TC I strongly recommend a v5 airport utility.. you can download one for windows if you don't have a Mac.. iOS version of the utility I am not sure but it will not work to do complex things.
In the v5 utility go to the NAT area, and click on port mappings.
Sorry I don't have a screen shot at the moment of the actual mapping page.. but simply put the IP of the device you want opened and the port.
There are plenty of posts with this info if you google.
But as noted.. this is purely WAN to LAN.. nothing else.

Wireless CCTV - need to open a port

Hi All;
I have a wireless monitoring system (CCTV) for my home that can be accessed remotely though my IPhone or IPad when I am away.
It works great while I am at home on my wireless network but I cannot get access when on a remote Wi-Fi.
Apple Store here says I need to open a port in my Time Capsule to allow access when I am outside my network.
Anyone have instructions or can step by step it for me?
Thanks in Advance.
Mark

Thanks for the reply William;
I actually contacted the manufacturer and they sent me a step by step instruction including, as you suggested the ports that the cameras use.
Once we get through this Christmas season ... will get it all set up.
Thanks again
Mark

Opening a port issue: I Need to open a port in an airport extreme.

I Need to open a port in an airport extreme, but I'm connected through an airport express in bridge mode. I need to access a specific computer inside my network through that port to be able to use it as a server. I can't seem to find the correct way to set everything up. I've tried opening the port and everytime I check it through telnet or any open check tool on the net it keeps saying the port is closed. I'm stumped.

After digging around it looks like Snow Leopard doesn't use ipfw for opening ports.
Does anyone know how to open ports in Snow Leopard? Apple don't seem to have any info on this - besides the allow incoming connections for certain applications.
Will try WaterRoof and see what happens.
Cheers
Ben
Message was edited by: Ben Sciascia

I purchased an IPad Mini for my mother-in-law using my Apple ID. I need to open an ID for her and take mine off the Mini. How would I do this?

I purchased an IPad Mini for my mother-in-law. I used my Apple account since she didn't have one. I need to open an account for her and change the account on the IPad Mini from mine to hers. Can anyone point me in the right direction to get this done? Thanks.

Best way
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661http://support.apple.com/kb/HT5661
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621http://support.apple.com/kb/ht5621
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_UShttp://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311http://support.apple.com/kb/ht1311
How to Delete an Apple ID
http://www.wikihow.com/Delete-an-Apple-IDhttp://www.wikihow.com/Delete-an-Apple-ID
Apple ID Support - Manage Account
https://www.apple.com/support/appleid/manage/https://www.apple.com/support/appleid/manage/
Create an Apple ID
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleIdForIK B?localang=en_US&path=https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleIdForIK B?localang=en_US&path=
 Cheers, Tom

Please help, I need to open a port...

Hello all,
I am a newbie to Solaris, I have the need to open port #36678 on a server running Solaris 8. I am sure it is simple but just do not know where to start, I have ran a netstat -a and it is not listening now.
Thank you in advance.

Hello all,
I am a newbie to Solaris, I have the need to open
port #36678 on a server running Solaris 8. I am sure
it is simple but just do not know where to start, I
have ran a netstat -a and it is not listening now.Administrators do not open ports on a machine. Applications open ports as they run.
So you would launch a program, and it would try to use the port.
Presumably you have some such program in mind?
Darren

I need to open specific ports in the firewall - how do you do that?

Hi There,
I'm trying to setup a web development server on a spare mac mini but I can't figure out how to open ports for the MySQL server under Snow Leopard.
Is there a way to do this? I've set the firewall to allow MAMP to open ports whenever it needs to but when I do a port scan of the Mac mini the MySQL port doesn't show up - SSH, HTTP and VNC do however.
I'm happy to configure it via the Terminal but I can't find any info on how to do this in Snow Leopard as I think it's different from Leopard (based on what I've found online).
e.g.
$ ipfw show
Gives me an error:
"ipfw: socket: Operation not permitted"
Any help would be much appreciated
Cheers
Ben

After digging around it looks like Snow Leopard doesn't use ipfw for opening ports.
Does anyone know how to open ports in Snow Leopard? Apple don't seem to have any info on this - besides the allow incoming connections for certain applications.
Will try WaterRoof and see what happens.
Cheers
Ben
Message was edited by: Ben Sciascia

RealPlayer says I Need to Open a Port For Chat to Work, Am I doing it Right

I have live feeds for CBS's Big Brother. I'm trying to get on their Chat and I get a Java IOException error, cannot connect to server, etc.
RealPlayer is insisting I have to open port 21 and/or 6667 in my router (AEBS).
I entered 21, 6667 in all 4 port fields. Under Private IP address, I put my computer's number. Under "service". I didn't touch that.
Am I doing this right? Cuz it's still not working for me. I know other Leopard users are able to get into this chat and I think it has something to do with my AEBS. I even loaded the developer version of the latest Java to no avail.
Suggestions?

Your firewall is off. That's good for now. Make sure that you Enable NAT Port Mapping Protocol in Internet/Internet Connections/NAT tab. Also, do you have a static IP on your machine? Or are you getting your IP via DHCP. This info is in the OS System preferences/Network/Advanced? tab. Then click on the TCP/IP settings.To get the ports forwarded correctly you'll need to set a static IP (manual) on your machine. But you'd think in all their wisdom that Real would have NAT enabled chat. Meaning, you should get out with DHCP and NAT enabled. No forwards needed.
Setting a static IP on your machine is relatively easy but affects other things on your network and you have to do a bit of planning to set it up.
In a nutshell:
Set up an IP address on your machine outside the scope of IP's being distributed by your router.
Map a port that resolves to that specific port.
I think you did it right above but didn't possibly have a static ip to resolve to.
Hopefully I am not confusing you with all this.

Apparently I need to open several ports on my Airport Extreme to be able to chat on Xbox One.

Can anyone tell me how to open ports Here are the ports I need open:
      88 UDP
     3074 UDP and TCP
     53 UDP and TCP
     80 TCP
     500 UDP
     3544 UDP
     4500 UDP

select Airport extreme, click modify, then network then change the router mode to DHCP and NAT, then add your ports in the ports section.

I need to open the port so I can use my Belkin @TV. Can't figure out how to do it.

I just bought an AirPort Extreme. Now my Belkin @TV will not work It says server error. Either TPC port 49177 is not forwarded on the router to which @TV is connected. What can I do to fix this on my AirPort Extreme?

For the basics of how to configure an AirPort Extreme for port forwarding / mapping, please check out the following AirPort User tip.

Error: "Could not sign in. Please check your network connections and try again", regardless of which Apple ID used. Do I need to open ports on the router?

Attempting to log into FaceTime on iMac and get this error Could not sign in. I have tried multiple Apple IDs and checked that connection to internet is working as normal. Do I need to open certain ports on the router to allow a Facetime connection with iMac.
I am able to connect FaceTime with iPhone over wifi. iMac is connected via etehrnet cable to router.

I have the same problem with my MacBook Pro I have it connected to WiFi

I live in Italy and opened my itunes account with an Italian credit card. I want to access only English itunes and Apple said I need to open separate accounts. Any suggestions?

I live in Italy but am Australian and opened my itunes account with my Italian credit card and address, but that does not let me access itunes in any English country which is what I had wanted. Apple tell me I need to open separate accounts, complete with address and tel. Yesterday they told me I could do that with an itunes prepaid card but on the Aust itunes store the card was considered invalid (obviously because it is in Euro) Any suggestions? I am sure I am not the only person living in another country who needs access to itunes in their mother tongue......how backward is Apple!

To be able to download content from another country's store you need a valid billing address in that country, and be in that country when buying from it.
Apple can only sell content where the content provider's grant them licenses to do so, so if the music etc that you want to buy isn't available in the Italian store then it's because the provider's aren't letting Apple sell it there. Do you have access to other music purchase download sites which have the content that you want ?

What ports do I need to open on my router for iChat AV?

What are they ports that need to be opened? (Range) I am using a linksys router..

Hi Ralph,
I am sorry, but UPnP is automatically enabled on my Netgear 834G but still won't make it work.
I've disabled the internal Firewall in 10.4.6 and also opened all ports on the router (1024-65535) for both outbound and inbound. I've trashed all pref files in /Library/Preferences. Yet I have still failed to connect to an AIM user.
If I disconnect the router and plug in an old D-Link ADSL modem it works striaght away for iChat and AIM users without a fail.
Any help appreciated!
Thanks,
M

Opening multiple ports on Airport Extreme

I need to open multiple ports on an Airport Extreme to allow for ftps service (about 500 ports). In port forwarding, it appears that I would have to enter 500 entries to do that (e.g. port 4001, 4002, 4003 etc.) Sounds wacky. In other routers (or linux sortware), multiple entries can be entered like "400, 4000-4500". Apple docs don't address this (from what I could find). Is there a syntax for multiple port forwarding?

Are you using the round 802.11b/g AirPort Extreme base station (AEBS) or the square 802.11b/g/n AEBS?
The round AEBS does not allow you to enter ranges. The only solution for a great number of ports is to use the default host option and send ALL the ports to the designated computer.
I believe that the square AEBS allows you to enter ranges.

1605 R - how to open a port

I need to open a port for remote database access, and have no documentation or schematic for how this was set up by a volunteer ages ago. I have found some Cisco docs on how to get in to configure, but nothing on the process for opening a port. any advice appreciated!

I haven't gotten in to get that information off it yet...there is no browser interface, so I have to connect directly. We have the Cisco 1605 R in front of a Linksys switch. It is not in default setup, it was configured at install...I know this port is not open, because we pinged it from outside.
We deal with a lot of confidential client information, so we are locked down tight. I want to open up this port for remote database access. And as I said, this was set up so long ago there is no documentation. But once I get in I will post the config if I can do that without compromising our data.
I'm not even sure I can get past whatever passwords are on there to get the config off it...we may have to contact the volunteer to try to find out how it is set up. I was just hoping someone could point me towards a procedure for setup once I am in there, but maybe it will be apparent in the interface.

Apple TV Do I need to open a port on my router

Similar Messages

Maybe you are looking for