Apple TV does not show up in device list

I've read all the post with the same subject but still can not get the Apple TV to show up in the device list of itunes.
I have multiple computers on a wired/wireless network, one is a windows XP laptop machine and it sees the Apple TV fine, can sync with itunes works great. This machine is connected via wireless connection. This machine does not have my music or photos that I want to sync so I want to sync the Apple TV with my desktop, I was just using the laptop as a diagnostic tool and to better understand the interaction between itunes and the Apple TV. I have tried all the steps given and still can not get the Apple TV to show up as a device on the desktop.
I originally had norton firewall on the desktop, uninstalled that so it would not be in the way, did not help. Windows firewall is not enabled.
I have sharing enabled in itunes and I have look for Apple TVs enabled. I have rebooted the router, Apple TV, computers etc. Reinstalled itunes.
I have a linksys wreless router in the system. I have tried connectnig the desktop via a wired connection as well as a wireless connection, no difference. The Apple TV can get on the wireless network fine, it can access the internet fine to play movie trailer etc. I have also connected it directly to the router via a cable, does not help. I tried connecting the desktop to the Apple TV directly with a crossed ethernet cable, did not work.
The desktop can ping the Apple TV.
I am assuming I do not have a problem with ports as the laptop sees the Apple TV fine?
Any suggestions or tips would be greatly appreciated

Welcome to the Apple Discussion Forums.
To summarise and for clarity: You have set up your laptop itunes library and it works as it should with the tv, now you are trying to add your desktop and it doesn't see the tv.
First point: the Laptop is your primary library, you can only have one primary library and if you wish to sync from the desktop you will need to make that your primary library instead of the laptop. You will need to turn of syncing for the laptop and register the desktop with the tv for syncing first and then the laptop as a secondary (streaming only) library. If you are trying to use your desktop without de-registering the laptop it will only ever be a secondary (streaming) library.
You may have realised this and if so all well and good, but if not you might want to continue to establish your desktop as a secondary library and satisfy yourself that all is well before turning off your laptop and setting everything up again.
On the assumption you are setting up the desktop as a secondary library at this time, how far have you got with registering the desktop, have you successfully entered the pass codes, did the tv show in the device list at any stage. As a secondary library itunes will only show the tv in it's device list when that itunes library is selected as the source library from the tv itself, could this be why you are unable to see it in the device list.

Similar Messages

  • My Apple TV does not show up under devices, and more.

    Okay, firstly, I am relatively new to Apple ptoducts.  I was recently purchased an Apple TV and a 27 inch iMac by my lady.  And yes, I realize how amazng she is.  She bought me these gifts to ensure that the last two and the next 4 months go by smoothly.  I was struck by a car while it was doing 65+ mph, than struck again by the same car, than ran over and jumped off of.  Yeah.... So needless to say I have severe brain damage, lost memory, a leg that is now 52% titanium and worse, I can not use my right arm.... for now, it may recover with the next two years.  so, I tell you this for a little "guilt" but mostly to excuse the formatting of this email.  It was typed entirely on my iMac and entirely using one hand, and not my primary hand at that.
    I am not new to iTunes, I had a few purchases before this issue.  Between those purchases and my Apple TV "FUN" I have amassed quite a few: Seasons of TV and Movies. 
    1:   When I log in to my Apple TV, I can see all of the purchases that I made using both the Apple TV and those that I made previously using iTunes on my Windows based PC.  All is well.  They are organized by type and sorted perfectly.  That plus they stream quicky and completely.
    2:   When I turn on my iMac and start iTunes, I do not see my TV seasons or Movies under the "Library" section on the left side of my iTunes screen.  I see the options, they are simply empty.  I see no content listed within them.
    3:   I can however select the "Purchased" option under the "Store" section on the left hand side of the screen.  Once inside that options area, I can click on "Download Previous Purchases" in the lower right hand corner of the screen.  From there I can see all of my purchased TV and Movies, including those that I had previously purchased on my old windows PC and those purchased recently on my Apple TV set.  That and I can download them and make them available to my iMac version of iTunes.
    5:   I am unable to see my Apple TV listed under the "Devices" section.  I also do not see the "Devices" section at all, however I assume that is because it is currently emty.
    QUESTIONS:
    A:   Can you stream data such as TV seasons or Moies while using iTunes on an iMac.  Similar to the way that you stream them from your iTunes purchase histor while viewing them on an Apple TV?  Or do I need to download them inorder to view them?
    B:   Is Apple TV shown under connected devices while it is connected to the Wi-Fi netwok?  I can see my Iphone under devices when I connect it with a cable to my iMac.  So I know that my devices section is working.  I simply fear that my Appl TV is not showing up brcause of existing issues.
    NOTES:
    A:   All of my devices are updated with the latest available drivers.
    B:   My Apple TV, iMac and iPad all work on the same Wi-Fi network.  That and they are all connected to the same iTunes account.
    C.   My lady is using a different login for the iMac.  Her iTunes is setup but is not usng my iTunes account, it is using her account and has access to her DATA.  When I log in to the iMac, my iTunes is working and is different from the iTunes that is operating under her username.
    Ok Guys..and Gals please help me out.  The thing is, none of this is truly effecting me in a substantial manor.  I can see my purchase history, I can download parts of it to my iMac via iTunes, and my Apple TV is smoooooooth.  I mainly need clarification on the questions that I asked.  Can I stream using the iMac, should I see my Apple TV under devices, and why do I not see my DATA under the library section of iTunes?
    THANK YOU for you time.  Remember, I am relatively new to Apple as a product.  And I fricking LOVE it. 
    When I was in my accident, my arm, my leg, my skull, my brain, my clothing, my key chain and my wallet, were all destroyed.  But my iPhone survived.  I have records both police and medical to prove this.  The one way I had to have any initial memory of my friends and family was in that phone.  I still have that phone, I always will.  So Apple if you need an awesome commercial for your iPhone, Vince has got your back!!!

    Ok thank you so much, for your timely response.
    RESPONSES:
    1)   When I set up my iMac, I did not transfer any data directly from my windows PC.  I simply used the same iTunes login and account.  I have access to all of the files via the "Purchased" section of the iTunes store.  If I click "Download Previous Purchases"  text, I can download ALL of the purchases I have ever made.
    2)   I have the Apple TV 2, so good news, question answered.  I thought maybe it was the Apple TV 1, but it is the Black model, so bam.  Good response for you.  Well the whole damned reply is an awesome response, just pointing out that one piece of awesome.  I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
    QUESTIONS:
    3)   So can my iMac not stream the data directly from itunes, without download?  Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
    SERIOUSLY.... THANK YOU... 
    I work in the computer support section for the Military.  The only problem is we use Windows , lol.  Well that and i've been gone for nearly 6 months on recover.  I go back next month though I hope.  But working in that field gives me the abilty to judge responses that run inside the same vein.  Your response was so awesome that I half thought I might have written it myself. 

  • My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

    My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

    Hope this helps:
    http://www.apple.com/support/iphone/assistant/itunes/

  • Why apple tv does not show in itune?

    why apple tv does not show in itune?

    Welcome to the Apple Community.
    I assume you have the Apple TV 1.
    Often a restart of ALL your equipment will help, it may also be a result of instaling or updating security software (check your security settings).
    If problems persist, navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • AppleTV does not show up in Devices in iTunes on streaming MacBook Pro

    My setup:
    - AppleTV connected wirelessly to the wireless router (Apple Extreme N Base Station).
    - Windows PC wired to the router and set up as machine that is sync'd to the ATV.
    - MacBook Pro connected wirelessly to the router and set up as a streaming machine.
    - All machines run iTunes 7.3.
    The AppleTV appears as a device on the Windows PC. No problem there.
    However, the ATV does not appear in the Devices list on the MacBook Pro 99% of the time and so I am not able to select it and change the photo albums I want to link. It occasionally appears. But I have not found a pattern to why it appears and disappears. Even when it does not appear in the Devices list, streaming from the MacBook Pro works just fine. So even as I am streaming, say, a podcast from my MacBook Pro, the ATV never appears as a listed Device.
    I can make the ATV temporarily appear by unlinking the MBP from the ATV and relinking it. During the link process, the ATV appears in the Device list. But it disappears as soon as the code is entered in the MBP.
    Confounding problem.

    how would
    it be if your mac continued to show every network
    device, firewire/usb drive that it had ever connected
    to whether they were still connected or not.
    Yes, it would be annoying if EVERY device that my Mac had ever connected to did show up all the time even after they were disconnected.
    However, there are some classes of devices that you do want your Mac to remember and show as available if they are detected active on a network. An example would a Bluetooth device that you have deliberately paired and designated in the Favourites list. If it was subsequently decided that this device should no longer appear, then removing it from the Favourites list does that.
    In my opinion, the AppleTV should fall in the same category. Since pairing is required and subsequent dissociation is possible by removing it from the iTunes list of allowed AppleTV units, then it should appear on iTunes' list of Devices as long as it is detected on the network. If the ATV is unpowered or if the PC moves onto a different network, that that ATV should not appear in the Devices list. There is an advantage for the logic to be implemented this way for the reason I have mentioned in an earlier post (i.e. being able to change the list of photo albums designated as available for streaming without having to go to the ATV, select the source PC, then going back to the PC to change the list).
    But again, just my opinion. It's always good to discuss these things so that others can see different opinions on an issue.

  • My new iPad mini does not show under manage devices

    I just purchased a new iPad mini for my husband. I removed his old one from the section of iTunes that reads manage devices. And even though his new iPad mini is synced and backed up, now the new one does not show under manage devices.
    Can anyone tell me how to get it to show up? I called Apple support and the lady trying to help me did not even know what I was talking about.
    Thank you.

    If you're on Windows read this support article.
    If on Mac, read this one.

  • Ipod touch does not show up under Devices in iTunes, but it does in iPhoto

    My iPod touch does not show up under Devices in iTunes, but it does show up under iPhoto.  Can anyone help troubleshoot this problem?
    Thank you for your help.

    try following the info here
    http://support.apple.com/kb/TS3694#error1611
    Error 1611: This error may indicate a hardware issue with your device.  Follow the steps  in this article. Also attempt to restore while connected with a  known-good 30-pin Dock Connector cable, computer, and network to isolate  this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0)  can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611.    To troubleshoot third-party security software, follow these steps.

  • I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

    I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

    Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did  and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
    I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery.   I can go back to the IStudio  here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be.  Thanks for all the help so far. God bless.

  • TS3798 My Apple TV Does NOT show the Internet menu option. Has all the other options but the Internet. I am connected to the Internet as I can  Rent, Buy ,etc..movies from the Apple Store...

    I have a first Genreation iPAD and just a new Apple TV, 3rd Generation. The Apple TV does not show the Internet menu option after booting up.

    There isn't one.
    AppleTV3 has icons for all the internet features.

  • TS3716 installed the new itunes and now my ipod nano  does not show in the device menu

    installed the new itunes and now my ipod nano  does not show in the device menu

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • W520 Smart Card reader does not show up in Device Manager

    W520 Smart Card reader does not show up in Device Manager.
    It was working before and now nothing.  Nothing happens when SD card plugges in.
    Could my smart card reader stop working or is this a configuration issue?
    Any thoughts?
    thanks
    Ian

    Hi  Ian,
    Welcome to the community, and thanks for the post.
    The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
    http://support.lenovo.com/en_SG/downloads/default.page?
    After that check if the issue get resolved.
    Regards,
    Sameer
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • TS3276 I created a new mailbox in mail, but it does not show up in my list

    I created a new mailbox in mail, but it does not show up in my list of mailboxes. Now I cannot change it or delete it. I keep getting an error message that I must resolve conflicts, but it won't let me change anything.  Can you help me fix this?

    Found it, thanks to the answer Vixen-of-Venus gave - thanks.

  • I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line.

    I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line. It is not my home page. Help!!!

    See also:
    *https://support.mozilla.com/kb/Removing+the+Search+Helper+Extension+and+Bing+Bar
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Resetting_preferences

  • HT3624 additional airport express not showing in wireless device list

    I have an additional AX to extend my WiFi but it's not showing in wireless device list; it is plugged in, next to base AX, did a hard-reset, amber light is blinking. Everything was working fine for a more than a year. Thank you for your help.

    I don't use Xserve but when this happens to me:
    I reset the express. I use a wireless Mac to "find" the Express. Need to select the network under the Airport icon. If not there then System prefs/netwrok/status/airport then drop down menu to preferred. If there select it and then select apply then back to that airport icon and finish by using the Airport Utility or in your case Admin utility. If not found in preferred then use the + button. I have never failed to "find" my "lost" network using this counter measure.
    If you don't have a wireless Mac then do it with an ethernet connection.

  • Bookmark does not show in the bookmark list, but does in a search

    I bookmark a webpage. Then it does not show in the bookmark list. However when I do a search in the upper right corner of the bookmark window (not like google search), the webpage bookmark is found. I am using Safari 5.06 (just updated). same with 5.03.

    Good/fast work Jane, but what was it please?

Maybe you are looking for

  • Aggregation Problem in DSO (Urgent)

    Hello Experts,                      I am loading data from PSA to a DSO where my Key is Activity type (e.g 2020, 2040, 2060, 2080). For each of the activity type I want to aggegate  the gender for male/female. In the key figure for Zmale I am using S

  • Flash + PopUp Blockers = Solution?

    Hi. I use flash to make full-flash web-sites. My most recent one is given at: " http://www.imeranews.gr". As you may notice, in order to open the site in full-screen I have to use a pop-up window - which by default all browsers block it. I of course

  • Resizing JButtons in a BorderLayout

    Hi, I've been working with a BorderLayout and whenever I try and set a JButton's size or preferredSize, it always ignores what I set it at and puts it's size as filling the entire BorderLayout.CENTER. Any ideas?

  • Error in MAT View Creation

    I am getting an error in creating a mat view. SQL> CREATE MATERIALIZED VIEW 2 MV1 3 as 4 select integration_id 5 from sbolap.w_org_d; from zeus.w_org_d ERROR at line 5: ORA-00942: table or view does not exist Here the zeus is the schema i am accessin

  • Task execution Log

    Hi Experts, In consolidation monitor for a data collection task we have activated "last log" funtionality at Task level. Please help us to find out the table where the last log stored. Not only the status of the log but the messages that comes in the