Apple TV Error 3906

Hello i've had Apple TV for about a year and had no problems with but i recently got a MacBook Pro and ever since it either wont find my wifi network, loses connection or gives me this Error -3906 code. Can someone please help me this is frustrating beyond no believe.

The problem seems to be solved...
I first reset my router completely, that didn't help. Then I did a factory reset on the Apple TV (although it had never been used before) and it seems to be working just fine now...
Thanks for the help!

Similar Messages

  • HT204400 no matter what i try,  my apple tv says it cant connect to the network and it gives me error -3906.  i have tried restart and reset, wifi, ethernet same error. all other devices work fine.

    My apple TV has been working fine. Now it gives me error -3906 and says it cant connect to the network. it wont accept the password for my wifi.  I have tried to restart and restore both the apple tv and my modem.  still the same issue and same error message.  any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Apple TV 3 error -3906

    Trying to connect the new Apple TV 3 wirelessly to a router (Fritz!Box 7390) on its 5GHz channel, but we keep getting error 3906 after entering the passkey. With other words, the Apple TV recognizes the router, but isn't able to go past the step of entering the router's wireless passkey.
    Router set to DHCP, mac address filtering (tried both on and off), encryption with WPA + WPA2 (not Enterprise), infrastructure mode, authentication: WPA-PSK, WPA2-PSK, data encryption: TKIP, AES-CCMP.
    Router was reset, Apple TV was reset, several times the both.
    Every Mac in the house connects to the same network without a whim, but the Apple TV 3 persists in an error 3906 message.

    Anyway, we've been trying to get the Apple TV 3 to work on a 5GHz channel many times. The ATV3 was placed near the router, to limit the chances of an insufficient signal. The router was reset to factory defaults, to prevent our settings to be the cause. Wireless security was disabled, different channels were selected, but we keep getting this highly informative error 3906 message.
    Just to try the ATV3, it was connected to a 2.4GHz channel. Since iTunes is the only means to watch the latest movies, we tried to find some titles we were interested watching. However, we didn't find any of those titles, which are readily available through other channels, or on DVD and BluRay.
    The other thing is iCloud, which we definitely don't want to use. The ATV3 doesn't allow playing from our own cloud/server, which is ridiculous.
    Again, Apple made a product that is especially beneficial to Apple, but not to us.
    Bottom line is, that we'll send the ATV3 back to Amazon and see if there's a better product available.

  • Error 3906 - Apple TV and TG582N router

    Hi there,
    I have previously had a Thomson/Technicolor TG582N working fine with my Apple TV up until a couple of days ago.
    However, the other day something happened, and I have no idea why.
    The Apple TV does not want to connect with the TG582N wirelessly, attempting to do so brings up an error-3906.
    the Apple TV sees the wireless network, but does not want to progress further once I enter the password.
    I have
    - restarted the Apple TV
    - reset the Apple TV and forced a system update through a USB connection with my Macbook Air and iTunes
    - reset the wireless router
    - removed the network password
    - changed from WPA-WPA2 to WEP
    - changed channels on the wireless router
    Can anyone suggest some other possible fixes?

    That will be due to your network. Try Ethernet. Go to istumbler.net to get a report, look for signal strength and noise

  • TS4036 cannot sign in the operation couldn't becompleted.(com.apple.appleaccount error 403) showing in icloud i need a sloution

    dear sir
    i can't sing in to my icloud. showing the message as above
    cannot sign in the operation couldn't becompleted.(com.apple.appleaccount error 403)
    i need a sloution fo it as soon as i am waiting to you ar replay
    thank you
    mohamed haseef

    Welcome to the Apple community.
    Are you trying to create a new ID, how many ID's have you created already on that device.

  • HT5621 i have this error, cannot sign in the operation couldn't be compleated.(com.apple.ppleaccount error 403.)

    i have I phone 4s facing this error, cannot sign in the operation couldn't be compleated.(com.apple.ppleaccount error 403.)

    Welcome to the Apple community.
    Are you trying to create a new ID, how many ID's have you created already on that device.

  • Itunes dll errors, APPLE SYNC error on bootup, sync error.....solution!

    One brilliant guy came up with this solution in this forum and has worked on 5 straight PC's. The thing is, I found another thread that helped also. In addition to this, if you are getting the Apple Sync Error, or still have problems after doing this procedure, go into uninstall programs and remove the MobileMe application. It is appearing to be a major contributor to the errors with Apple Sync! Thank you for your help guys!!!!!!
    Okay, we're going to uninstall both iTunes and Apple Application Suppport this time. When we reinstall iTunes, that should reinstall Apple Application Support as well. We'll take a few additional explicit precautions along the way too. Best to print these instructions out, because at one stage of proceedings you won't be able to use a web browser.
    Preliminaries
    Download and save a fresh 64-bit iTunes installer to your hard drive. (Don't run the install on line and don't start the iTunes install just yet.)
    http://support.apple.com/kb/DL925
    Now, quit QuickTime (if you have that open) and Safari 4.0.4 (if you have that installed and open). Both applications use Apple Application Support, and they will interfere with the uninstall if you have them open.
    Uninstall phase
    Head into your "Uninstall a Program" control panel. Uninstall iTunes. Uninstall Apple Application Support.
    (From this point on until we reinstall Apple Application Support, neither QuickTime nor Safari 4.0.4 will be able to run.)
    Next we'll remove any leftover program files and folders.
    (1) Open "Local Disk (C:)" or whichever drive your program files are stored on.
    (2) Open the "Program Files (x86)" folder.
    (3) Right-click on the iTunes folder (if it still exists) and select "Delete".
    (4) Staying in Program files (x86), find and open the "Common files" folder.
    (5) Open the "Apple" folder.
    (6) Right-click on the Apple Application Support folder (if it still exists) and select "Delete".
    Now empty your Recycle Bin and restart the PC.
    Reinstall Phase
    After the PC restarts, do not open any other applications. Disconnect from your network and/or the internet. Switch off all your security software (firewall, antivirus and antispyware).
    Now start the install by doubleclicking the iTunes64Setup.exe file you downloaded earlier.
    Reenable all security software prior to reconnecting to your network and/or the internet.

    Thanks to all on this thread..  same problem, same solution.
    This time it was on Win 7, the setup worked fine for awhile, and then SWMBO "did something" and it stopped working.  Much debug later, found the log message and realized that there was a streaming problem, but could not figure out if it was the router, my wireless network (I'm using it tied to my existing wireless network) or what.  New hardware, fully up to date firmware..  Argh!
    I finally found this post, found the offending file ( ..\Users\xxxxxxx\AppData\Roaming\Apple Computer\Preferences\com.apple.iTunes.plist ) and simply moved it to another folder.  Restart iTunes, and all is copacetic.
    Clearly this is a software issue in iTunes, and is happening accross HW and SW platforms for better than 2 years now.. 
    I love the device, but the only reason I have it is to drive the stereo.  They should fix this one...

  • Why i cant sign in icloud .. (com.apple.appleaccount error 403.)

    please help me..i cant sing in icloud .. (com.apple.appleaccount error 403.)

    Are you using a Windows computer.

  • I need your  error {com.apple.appleaccount error 403}

    I need your help please as i has the below error {com.apple.appleaccount error 403} so how i can solve it to work in i cloud please i need a reply

    Error: com.apple.appleaccount error 403
    Recreate Error: On a Iphone/Ipad device that has "already" created the maximum of 3 per device Apple limit of ICloud account creation attempt to create or login to ICloud service tab in Settings. You will be presented with "com.apple.appleaccount error 403" which does not tell the laymen anything useful.
    Cause: IOS 7 reports a "best guess" error instead of detailed error explanation.
    How To Resolve Error: Find a device that has not been used to create an ICloud account the maximum 3 times and use it to create the ICloud account by logging into the Settings/ICloud tab with the Apple ID you want a ICloud account created for.
    Keep in mind this will use up one of the three lifetime allowed ICloud account creations allowed by Apple on that device.
    Also per support: If an existing account is logged into the ICloud service. A. Backup phone using iTunes on a mac/pc. B. At bottome of Settings/ICloud Delete the account "AND" all the user date from the phone. It will offer the Delete all data option. The reason for Deletion(and is why we backed up on a pc vs. the cloud) is when you create the new ICloud account it will backup all of the Device owners information to the wrong persons account.
    Once you have created the new ICloud account log into that account on device that was presenting error: "com.apple.appleaccount error 403" it should allow the ICloud login.
    Once you have verified the "device with error" is ICloud functional delete the ICloud account from the device used to seed the ICloud account and delete again all user data from cloud. Restore the recently created mac/pc Itunes locally created backup to the phone and then go to Settings/ICloud and login with the device owners Apple ID and password and verify your backup to the ICloud settings and Eureka! your done.
    It took less time to do that for me to type this lol.
    NOTE: Original posted under poet68 id, that was me logged in as my customer. This was me "danowolf" discovery and solution developed with Apple support on the phone 9/26/2013

  • How can I fix apple tv error "this content requires hdcp for playback"

    how can I fix apple tv error "this content requires hdcp for playback" I've done everything suggested in troubleshooting and still my apple tv don't work.  I'm thinking on returning it, since it doesn't work.

    Welcome to the Apple Community.
    Check that the HDMI cable is correctly seated at both ends.
    Try disconnecting the cable and connecting it again.
    Try another HDMI cable.
    Make sure your TV supports HDCP
    Try the Apple TV with another TV

  • It's time to enter the Apple ID error: the operation couldnt be completed

    It's time to enter the Apple ID error: the operation couldnt be completed

    plz i can noto sign in to my apple id i se error the operation couldnt be completed

  • Apple tv error connectionmanager::invoke::

    I get this error:
    apple tv error connectionmanager::invoke::   Over and over can any one help me?

    I uninstalled itunes 11 and installed itunes 10.6.3
    You will have to delete the library file in my documents or my music before installing i tunes 10.6.3
    Worked for me, itunes 11 has been the worst exprience i have ever had with apple. Made other avenues appealing. Last thing you want to do is come home and troubleshoot.

  • Apple TV error message HDMI doesn't support HDCP

    Apple TV error message HDMI doesn't support HDCP

    I ran into this problem and I re-started the Apple TV by holding down the Menu+Down arrow buttons, restarting my television and now i can watch everything.

  • Recently purchased a 2nd handed iphone 4 (that's all i afford) but when trying to create icloud account it give me "com.apple.appleaccount error 403" message. I am asking for support and advice.

    recently purchased a 2nd handed iphone 4s(that's all i afford) but when trying to create icloud account it give me "com.apple.appleaccount error 403" message. I am asking for support and advice.

    Did you already check this post?
    Re: I am facing problem in signing in iCloud on my iPhone. when I enter my Apple ID, I got the message which is: "The Operation could't be completed. (com.apple.appleaccount error 403.)"  Kindly solve my problem. I want to sign iCloud from my iPhone.worri

  • My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

    My ipod gen 3 is frozen after the latest update from itunes,it will not power on or restore without error.Itunes is up to date,changed usb ports,even uninstalled and reinstalled all apple software, error 1601 during restore

    Hello, VvioletT. 
    Thank you for visiting Apple Support Communities.
    I see you are experiencing issues syncing your iOS device.  Here are a couple articles that I would recommend going through when experiencing this issue.
    iOS: Troubleshooting USB-related alerts when syncing
    http://support.apple.com/kb/TS5254
    Resolve issues between iTunes and security software
    http://support.apple.com/kb/ts3125
    Cheers,
    Jason H.

Maybe you are looking for

  • WiFi loss & battery drain a software issue, not hardware

    I wrote the commentary below after installing IOS 7 on a 4S and resultantly losing WiFi entirely and enduring major battery drain issues. After two trips to the Apple store and meeting with their techs at the "genius" bar, I was emphatically told tha

  • How to call ISR form in task

    hi friends   Am working in ISR workflow for address change. I have designed ISR form in SFP t-code. I have designed the workflow for my requirement. How to call the ISR form in my method. I have check other standard workflow in that its using EDITASY

  • When I start SQL server agent (sharepoint) service it stops everytime.

    hi,   I have a windows server 2012 and SQL server 2008 R2 and SQL server agent (sharepoint) service goes to stop status everytime i start it ,please help me?

  • When opening any website the opening page shows the title and ending but nothing inbetween;why?

    when opening a websi8te such as the Met Offi8ce,I get the heading Met Office then a large gap following the endit message.Then I get the information I asked for on a seperate second page.This event repeats itselk on every website i visit.

  • Servlets / JSP / IE 5.0

    I have a jsp which invokes a servlet . The servlet does some processing ,           puts a collection           in the request as an attribute . The servlet uses a requestdispatcher to           forward to another jsp page           which uses the co