Apple tv: error 404

Every two weeks my Apple TV is showing "encountered HTTP error 404" when I try to watch a movie on HBO or a cartoon on Disney Junior. The only way I know to fix this error is to reset the Apple TV. But it is too boring reseting my Apple TV every two weeks because I need to connect to internet, conect o itunes account, install app remotes again and again... I already did the reset about 10 times...
I also tried to avoid updates unchecking the automatic updates, but the error is still happening.
How to eliminate this error?

I already did that. But the problem happened again. I read in a forum that this could be happening because the automatic update of Appe tv. Then, I turn the automatic update off, but in a few days the error 404 happened again. The only way to fix this error is reseting the Apple tv, but it requires the whole configuration of the internet, itunes account, app remotes, instalation of HBO, instalation of Disney Junior and all other apps that requires a tv provider; everything again everytime I reset the Apple tv settings. This is too boring!

Similar Messages

  • I have a MacBook Air OSX, Version 10.7.5 and when open my Apple Calendar, I get the alert "encountered HTTP error 404. Make sure the URL is correct. Anyone?

    I have a MacBook Air OS X, Version 10.7.5 and when open my Apple Calendar, I get the alert "encountered HTTP error 404. Make sure the URL is correct. Anyone? The error message comes very often but my calendar DOES still work.

    I went to System Preferences; Mail, Contacts, Calendars; Under my mail address I unchecked "Calendars and Reminders" then rebooted the system. When it restarted I went back and checked "Calendars and Reminders" again and now it is working again.

  • New Apple Tv w/download error 404 or 3150 w/podcasts, please help!

    I have a new Apple Tv and when I try to download podcasts, it stops downloading and gives me an error 404 message or error 3150. Can anyone help me through this?

    marcianluanda wrote:
    I think that we could, but the problem is still the streaming speed. We're not able to view any streaming video here because of our overall lack of download speed. I know, we shouldn't be trying this in such antiquated places, but it seems like such a good idea when you're tv starved! lol!
    in your previous thread you already mentioned you had poor internet speed, this could be your issue here also.

  • Error 404 when trying to download purchased song

    hi,
    I purchased a song the other day but i am unable to download it. the error code i get is error 404.
    "There was a sproblem downloading "Hung Up / Confssions On a Dance Floor / Madonna. The URL "http://a647.phobos.apple.com/r10/music/0a/69/ec/mzm.shkpfara could not be found on the server.
    any ideas???

    Contact the iTunes Store customer support department through the form at the bottom of their Download FAQ web page and explain the problem to them.

  • When launching firefox I get error 404 not found how do I fix that I upgraded to 3.2.20 (1)

    I upgraded to 3.6.20 (1) yesterday and it was working find. When I open firefox it automatically says "Error 404 not found" and nothing else but blank underneath. Any solutions I checked the plug in and it wants to download Quicktime 7 and it keeps referring to a MAC and I have Windows XP

    Hi jahhaas,
    Take a look at the troubleshooting steps outlined for Windlows 7 in this article:
    http://support.apple.com/kb/HT1923
    Cheers,
    GB

  • THE PAGE CANNOT BE FOUND - HTTP ERROR 404

    I have just installed i-WEB 08 and have tried to publish a web page. I have saved, as prescribed and, to my knowledge, there are no passwords associated with the web page. When I try to access the page using SAFARI v3.0.4 the following error message appears:
    "The page cannot be found. The page you are looking for might have been removed, had its name changed, or is temporarily unavailable. Please try the following: Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly. If you reached this page by clicking a link, contact the Web site administrator to alert them that the link is incorrectly formatted. Click the Back button to try another link.
    HTTP Error 404 - File or directory not found.
    Internet Information Services (IIS)"
    I have checked address is as supplied and tried adding my user name to the www address without luck. Friends have also had same error message.
    Can anyone supply an answer, please.

    Did you publish to .Mac or another host?
    Were there any warnings or errors during publishing?
    What is the URL of the page you get the error on?
    By the way, this is the "+Previous to+ iWeb '08" forum; the iWeb '08 Forum is here:
    http://discussions.apple.com/forum.jspa?forumID=1193

  • IPad iTunes app not found error 404

    When I goto itunes app it has message Cannot connect to iTunes Store-error 404 - What's that & how to I fix it?

    I'm not real sure about the error 404 code with regard to the App Store, but see if anything in either of these support articles helps you get connected to the App Store and the iTunes Store again.
    Can't connect to the iTunes Store - Apple Support
    Best Fixes for 'Cannot Connect to iTunes Store' Errors | iPad ...

  • How can I to solve the error 404?

    I received  this message: https://caldav.calendar.yahoo.com/principals/users/MYEMAIL ADDRESS
    http error 404
    Please, how to solve it?

    hpuche wrote:
    Thank you toNiel and Kappy. However, I did not write the caldav link. It is the imac that it is looking to update the calendar from my iphone and ipad wiht the computer and it does not seem to find them. I never wrote any of those links that the error message shows. Therefore, I do not know where to change the address. The server is apple's server, not mine.
    That is not an Apple Server, it is a Yahoo Server, the iMac did not create it, Yahoo did and supplied it to your iMac. Call Yahoo tech support so you may to verify or correct the address.
    https://caldav.calendar.yahoo.com/principals/users/MYEMAIL

  • ERROR 404 ON BOOKMARK LINK FOR USER GUIDE AFTER UPDATE TO VERSION 6, REST OF BOOKMARKS WORK FINE, ERROR 404 ON BOOKMARK LINK FOR USER GUIDE AFTER UPDATE TO VERSION 6, REST OF BOOKMARKS WORK FINE

    Received a 404 erorr on accessing "user guide" bookmark in safari after updating new ios to 6, rest of bookmars work fine. What is the address to the user guide for iphone 4s with ios 6 ?  Thanks

    To BradKY...
    No, this link is not fixed. It still comes up as "web page not found" (error 404). The ErrMsg comes on my 3gs iPhone bookmark for the "iPhone User Guide" -- which worked just fine prior to the upgrade to iOS 6 -- also this is a dead link via computer. The bookmark link is as follows: http://help.apple.com/iphone/6/  -- "The requested URL /apps/mobile/2.0/ was not found on this server -- Apache/2.2.3 (PU_IAS) Server at help.apple.com Port 80"
    Thanks,
    jgamins

  • Ical error 404

    Dear colleagues
    I have a problem with one or our calenders. We are a small business recently converted to apple. We have 4 admin maschines. We installed an alle maschines a team ical over the cloud. It all works on three maschines but on the 4th one I must have made a mistake. When I start the app ical on that maschine the message comes up: The Server responded with an error: The URL http//pl4-caldiv.icloud.com 443/1675512932 / principle / encountered HTTP error 404 make sure the URL is correct.
    I have no Idea what to do with this message but also can't use ical on this maschine anymore because this message comes up every two minutes. What have I done wrong
    Thanks for your help
    Paul

    Hi TLP Paul,
    Here is an article of troubleshooting for iCloud calendars:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    I would say try the "General Troubleshooting" and "Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)" sections first.
    Cheers!
    - Ari

  • Error 404 while downloading icloud for pc

    iphone
    problem : i can't download icloud for pc #windows 8 # because of error 404 on dawnloading page <i have a msg #sorry we can't find your page#<

    What OS are you running? That kind of message is usually generated in XP (service pack 2) due to DEP issues. (DEP = Data Execution Prevention). You may need to disable this feature.
    Try:
    Start > Control Panel > System > Advance > Performance Settings > Data Execution Prevention
    Watch out though, I hear XP has various issues on iCloud. You may want to upgrade to a more recent OS.
    Windows 7 is much better (don't bother with Vista).
    In general, try Googling these kinds of error messages. You can normally get to the bottom of things quicker by searching on the Web, rather than faffing around with Mac's tech assistance, especially when it comes to PC-related problems. In my experience the kids at Apple's Express Lane know very little about anything, and Apple forum users with truly helpful info are few and far between.
    Hope you fix your problem without too much trouble!

  • "Error 404: file not found"displayed when trying to run a process on server

    Iam trying to run a "weblogic integration-process application" on server to test the application. Iam using weblogic workshop 9.2.
    It is giving me the below error:
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.5 404 Not Found
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
    File iam trying to run is RequestQuote.java
    The file is in Tutorial_process_application_web/src/requestquote/
    In the browser it is opening the below link:
    http://localhost:7051/Tutorial_Process_Application_Web/requestquote/RequestQuote.java
    I tried adding "src" in between but still same error is coming. I tried running just http://localhost:7051/, it is opening the weblogic integration window.
    I have pasted the web.xml and all other configuration files below. Please let me know what changes i have to make to get the testing window.
    Thanks,
    Vishu.
    web.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
    <display-name>
    Tutorial_Process_Application_Web</display-name>
    <listener>
    <listener-class>com.bea.wli.management.WliWebAppListener</listener-class>
    </listener>
    <welcome-file-list>
    <welcome-file>index.html</welcome-file>
    <welcome-file>index.htm</welcome-file>
    <welcome-file>index.jsp</welcome-file>
    <welcome-file>default.html</welcome-file>
    <welcome-file>default.htm</welcome-file>
    <welcome-file>default.jsp</welcome-file>
    </welcome-file-list>
    </web-app>
    weblogic.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <wls:weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-web-app.xsd">
    <wls:context-root>Tutorial_Process_Application_Web</wls:context-root>
    <wls:library-ref>
    <wls:library-name>struts-1.2</wls:library-name>
    <wls:specification-version>1.2</wls:specification-version>
    <wls:implementation-version>1.0</wls:implementation-version>
    </wls:library-ref>
    <wls:library-ref>
    <wls:library-name>jstl</wls:library-name>
    <wls:specification-version>1.1</wls:specification-version>
    <wls:implementation-version>1.1.2</wls:implementation-version>
    </wls:library-ref>
    <wls:url-match-map>weblogic.servlet.utils.SimpleApacheURLMatchMap</wls:url-match-map>
    </wls:weblogic-web-app>
    application.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <application id="Application_ID" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
    <display-name>
    Tutorial_Process_Application_Ear</display-name>
    <module id="WebModule_1180909671484">
    <web>
    <web-uri>Tutorial_Process_Application_Web.war</web-uri>
    <context-root>Tutorial_Process_Application_Web</context-root>
    </web>
    </module>
    <module>
    <ejb>Tutorial_Process_Application_Web_WLI_ProjectBeans</ejb>
    </module>
    <module>
    <ejb>Tutorial_Process_Application_Web_WLI_ComponentBeans</ejb>
    </module>
    </application>
    weblogic-application.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <wls:weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/j2ee_1_4.xsd http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-application.xsd">
    <wls:ejb>
    <wls:start-mdbs-with-application>false</wls:start-mdbs-with-application>
    </wls:ejb>
    <wls:application-param>
    <wls:param-name>webapp.encoding.default</wls:param-name>
    <wls:param-value>UTF-8</wls:param-value>
    </wls:application-param>
    <wls:classloader-structure>
    <wls:classloader-structure>
    <wls:module-ref>
    <wls:module-uri>Tutorial_Process_Application_Web.war</wls:module-uri>
    </wls:module-ref>
    <wls:classloader-structure>
    <wls:module-ref>
    <wls:module-uri>Tutorial_Process_Application_Web_WLI_ProjectBeans</wls:module-uri>
    </wls:module-ref>
    </wls:classloader-structure>
    <wls:classloader-structure>
    <wls:module-ref>
    <wls:module-uri>Tutorial_Process_Application_Web_WLI_ComponentBeans</wls:module-uri>
    </wls:module-ref>
    </wls:classloader-structure>
    </wls:classloader-structure>
    </wls:classloader-structure>
    <wls:listener>
    <wls:listener-class>com.bea.wli.management.WLIAppListener</wls:listener-class>
    </wls:listener>
    <wls:library-ref>
    <wls:library-name>beehive-controls-1.0</wls:library-name>
    <wls:specification-version>1.0</wls:specification-version>
    <wls:implementation-version>1.0</wls:implementation-version>
    </wls:library-ref>
    <wls:library-ref>
    <wls:library-name>wls-commonslogging-bridge</wls:library-name>
    <wls:specification-version>1.0</wls:specification-version>
    <wls:implementation-version>1.0</wls:implementation-version>
    </wls:library-ref>
    <wls:library-ref>
    <wls:library-name>weblogic-controls-1.0</wls:library-name>
    <wls:specification-version>1.0</wls:specification-version>
    <wls:implementation-version>1.0</wls:implementation-version>
    </wls:library-ref>
    </wls:weblogic-application>
    Edited by gvishu at 06/04/2007 9:39 AM

    sorry i didnt mention the weblogic workshop version, it is weblogic workshop 9.2.
    Thanks,
    vishu

  • Error 404 -- Not Found, when a Servlet is invoked from browser

    Obviously, I have not been able to configure my WebLogic Server 5.1.0 to run
              even the simplest servlet.
              I painstakenly went through all the steps that are listed in the WebLogic
              Server 5.1.0 documentation on the Web to enable servlets, but obviously, I
              have missed a step somewhere.
              I have modified the weblogic.properties file as per all the instrustions,
              but the server simply won't recognize any servlets, not even the SqlServlet
              that came with the server as an example.
              It would require more than 1 exchange of posts to resolve it for me, and I
              am wondering if one of you is willing to work with me on this until I have
              managed to configure the server to make a servlet work on it.
              The server does function as a Web server as I can run the index.html
              document by entering the URL: http://localhost:7001/index.html
              I am pasting the contents of weblogic.properties file below to get the
              person who is willing to help me started.
              The machine I have is a Pentium III with Windows 2000 Professional on it.
              It's a home machine and the WebLogic server is the freely downloadable
              version. I am using it to prepare for a potential contract work.
              I have managed to modify setEnv.cmd file and have managed to compile the
              SqlServlet.java, which is an example servlet. Neither this particular
              servlet nor a HelloWorld type of very basic servlet I have written are
              recognized by the server.
              As you can see from my weblogic.properties file (pasted at the end of this
              post), the SqlServlet has been registered. I have also uncommented the lines
              to allow for the following type of URL:
              http://localhost:7001/servlet/myServlet
              Thanks!
              Anjum Jaleel
              CONTENTS OF MY weblogic.properties file
              # THE WEBLOGIC PROPERTIES FILE
              # This file, which conforms to the java.util.Properties file
              # definition, configures your WebLogic products. You cannot run
              # WebLogic Server without setting required configuration properties in this
              # file. Required properties are marked and appear first in the file.
              # Details on each entry and important information about configuration
              # and security are documented on our website. Please go to:
              # http://www.weblogic.com/docs51/admindocs/properties.html
              # for full instructions on how to edit this file.
              # You do not need to include properties in this file unless you want to
              # change the default, embedded property. Some properties on the
              # AdminProps page are not listed here because the default property
              # is being used. You can change the default by adding the property and
              # its value to this file.
              # You cannot set weblogic.system.home in this file, since the WebLogic
              Server
              # must know where home is in order to retrieve this file. You can
              # change WebLogic home on the command line when you start the
              # WebLogic Server.
              # CLUSTER USERS: Note that the (shared) per-cluster properties file should
              # contain most all of the properties in this file. The only properties
              # that potentially belong in a per-server properties file for a server
              # running in a cluster are the registration (startup class) of pinned
              # RMI objects, and a few tuning properties that may be different for
              # servers in the cluster, depending upon hardware and memory. If you use
              # a per-server properties file, please REMOVE all properties except those
              # that are specifically required in the per-server properties file. You
              # can find specific notes on clusters by searching through this file for
              # "CLUSTER USERS".
              # The way this file is organized:
              # Core properties (includes REQUIRED and RECOMMENDED)
              # Core system properties
              # Core security-related properties
              # Core security-related properties for SSL
              # Core HTTPD administrative properties
              # Optional properties
              # Administrator properties
              # System properties
              # System startup files
              # System shutdown files
              # Security-related properties for Workspaces
              # Jolt for WebLogic properties
              # WebLogic Enterprise Connectivity properties
              # WebLogic File properties
              # WebLogic JMS demo properties
              # WebLogic RMI demo properties
              # WebLogic EJB demo properties
              # WebLogic XML demo properties
              # WebLogic ZAC demo properties
              # HTTPD administrative properties
              # WebLogic JDBC driver properties
              # WebLogic JDBC connection pool management
              # WebLogic demo connection pool
              # WebLogic HTTP Servlet properties
              # Proxy servlet registration
              # Classpath servlet registration
              # File servlet registration
              # ServerSideInclude servlet registration
              # PageCompileServlet (used by JHTML)
              # JSPServlet (used by JSP)
              # ServletServlet registration
              # Servlet reload properties
              # Servlet ACLs
              # WebLogic JSP properties
              # WebLogic JHTML properties
              # WebLogic RMI over IIOP properties
              # User-written and demo servlet registrations
              # CORE PROPERTIES
              # You should set these before you start the WebLogic Server the first time.
              # If you need more instructions on individual properties in this
              # section, check the same section in the Optional Properties, where
              # we've left the long explanations. Or, better yet, go to our
              # website and read all about properties, at:
              # http://www.weblogic.com/docs51/admindocs/properties.html
              # CORE SYSTEM PROPERTIES
              # TCP/IP port number at which the WebLogic Server listens for connections
              weblogic.system.listenPort=7001
              # CORE SECURITY-RELATED PROPERTIES
              # Read important information about security at:
              # http://www.weblogic.com/docs51/admindocs/properties.html
              # REQUIRED: The system password MUST be set in order to start the
              # WebLogic Server. This password is case-sensitive, at least 8 characters.
              # The username for the privileged user is ALWAYS "system".
              # This username and password also includes httpd access (see
              # HTTPD properties below).
              weblogic.password.system=lovkako1
              # RECOMMEND Set to 'everyone' if HTTPD is enabled
              weblogic.allow.execute.weblogic.servlet=everyone
              # Set individual ACLs to restrict access to HTTP-related resources,
              # such as the Administration servlets.
              # To make your own servlets generally available, follow this
              # pattern (provide a weblogic.allow.execute) for your packages and
              # set ACLs as appropriate.
              # CORE SECURITY-RELATED PROPERTIES FOR SSL
              # Read important information about SSL at:
              # http://www.weblogic.com/docs51/classdocs/API_secure.html
              # Enable SSL
              # (default if property not defined is false)
              weblogic.security.ssl.enable=true
              # SSL listen port
              weblogic.system.SSLListenPort=7002
              # Servlets for SSL
              # Authentication servlet for creating tokens for applets
              weblogic.httpd.register.authenticated=weblogic.t3.srvr.ClientAuthenticationS
              ervlet
              # Limits number of unclaimed stored tokens
              weblogic.security.certificateCacheSize=3
              # Capture CA root of client servlet
              weblogic.httpd.register.AdminCaptureRootCA=admin.AdminCaptureRootCA
              # Certificates for SSL
              # Name of acceptable CA roots
              # For client authentication change value to a valid .pem file
              #weblogic.security.clientRootCA=SecureServerCA.pem
              # Server certificates for SSL
              weblogic.security.certificate.server=democert.pem
              weblogic.security.key.server=demokey.pem
              weblogic.security.certificate.authority=ca.pem
              # registration for certificate generator servlet
              weblogic.httpd.register.Certificate=utils.certificate
              weblogic.allow.execute.weblogic.servlet.Certificate=system
              # CORE HTTPD ADMINISTRATIVE PROPERTIES
              # True permits the HTTPD to run (default)
              # Uncomment this property to disable HTTPD
              weblogic.httpd.enable=true
              # If authentication is required, add username/password for each user
              # who will be included in an ACL, as in this commented-out example:
              #weblogic.password.peter=#8gjsL4*
              # OPTIONAL PROPERTIES
              # These properties affect the behavior of the WebLogic Server.
              # You only need to set these properties if you want
              # to change the default setting, which is the property shown.
              # ADMINISTRATOR PROPERTIES
              # Administrator properties are optional information properties,
              # particularly useful for clusters.
              #weblogic.administrator.location=3355 California Drive, West Hampshire, CA
              94104
              #weblogic.administrator.name=Joe Administrator
              #weblogic.administrator.phone=1 415 555 1234
              # SYSTEM PROPERTIES
              # System properties in this section are set to system defaults
              # Performance pack. The shared library must be accessible from your
              # PATH (NT) or from your shared library path (UNIX; the name of the
              # variable varies: LD_LIBRARY_PATH, SHLIB_PATH, etc.)
              weblogic.system.nativeIO.enable=true
              # Outputs logging information to the console as well as to the log file
              weblogic.system.enableConsole=true
              # Sets the directory or URL for the WebLogic Admin help pages
              # The help pages are shipped in the "docs/adminhelp" directory, in the
              # default document root in public_html
              weblogic.system.helpPageURL=g:/weblogic/myserver/public_html/docs51/adminhel
              p/
              # If you prefer to access the most recent help pages, you can do so online
              # by commenting out the previous property and uncommenting this one:
              #weblogic.system.helpPageURL=http://www.weblogic.com/docs51/adminhelp/
              # Properties for tuning the server's performance
              # Number of WebLogic Server execute threads.
              weblogic.system.executeThreadCount=15
              # Other optional system properties
              # Limits size of weblogic.log (in K) and versions old log
              weblogic.system.maxLogFileSize=1024
              # Adjust minimum length of password
              weblogic.system.minPasswordLen=8
              # UNIX only: If running on port 80 on UNIX, enable the setUID program
              #weblogic.system.enableSetUID=false
              # UNIX only: Unprivileged user to setUID to after starting up
              # WebLogic Server on port 80
              #weblogic.system.nonPrivUser=nobody
              # CLUSTER-SPECIFIC PROPERTIES
              # Cluster-specific properties in this section are set to system defaults.
              # CLUSTER USERS: Note that ALL Cluster-specific properties should be set
              # in the per-cluster properties file ONLY.
              # Time-to-live (number of hops) for the cluster's multicast messages
              # (default 1, range 1-255).
              #weblogic.cluster.multicastTTL=1
              # Sets the load-balancing algorithm to be used between
              # replicated services if none is specified. If not specified,
              # round-robin is used.
              #weblogic.cluster.defaultLoadAlgorithm=round-robin
              # SERVER-SPECIFIC CLUSTER PROPERTIES
              # Cluster-related properties in this section are set to system defaults.
              # CLUSTER USERS: Note that these server-specific cluster-related properties
              # should be set in the per-server properties file ONLY.
              # Sets the weight of the individual server for the weight-based
              load-balancing.
              # Range is 0 - 100.
              # Larger numbers increase the amount of traffic routed to this server.
              #weblogic.system.weight=100
              # SYSTEM STARTUP FILES - Examples
              # CLUSTER USERS: Note that ONLY startup registrations for pinned RMI
              # objects should be registered in the per-server properties file.
              # All other startup classes should be registered in the per-cluster
              # properties file.
              # For more info on writing and using startup file, see the
              # Developers Guide "Writing a WebLogic Client application," at
              # http://www.weblogic.com/docs51/classdocs/API_t3.html
              # Register a startup class by giving it a virtual name and
              # supplying its full pathname.
              #weblogic.system.startupClass.[virtual_name]=[full_pathname]
              # Add arguments for the startup class
              #weblogic.system.startupArgs.[virtual_name]={argname]=[argvalue]
              # This example shows the entry for examples/t3client/StartupQuery.java
              #weblogic.system.startupClass.doquery=examples.t3client.StartupQuery
              #weblogic.system.startupArgs.doquery=\
              # query=select * from emp,\
              # db=jdbc:weblogic:pool:demoPool
              # SYSTEM SHUTDOWN FILES - Examples
              # For more info on writing and using shutdown file, see the
              # Developers Guide "Writing a WebLogic Client application," at
              # http://www.weblogic.com/docs51/classdocs/API_t3.html
              # Register a shutdown class by giving it a virtual name and
              # supplying its full pathname.
              #weblogic.system.shutdownClass.[virtual_name]=[full_pathname]
              # Add arguments for the shutdown class
              #weblogic.system.shutdownArgs.[virtualName]={argname]=[argvalue]
              # This example shows the entry for examples/t3client/ShutdownTest.java
              #weblogic.system.shutdownClass.ShutdownTest=examples.t3client.ShutdownTest
              #weblogic.system.shutdownArgs.ShutdownTest=\
              # outfile=c:/temp/shutdown.log
              # SECURITY-RELATED PROPERTIES FOR WORKSPACES
              # For backward compatibility, the following entries disable Access
              # Control on Workspaces
              weblogic.allow.read.weblogic.workspace=everyone
              weblogic.allow.write.weblogic.workspace=everyone
              # JOLT FOR WEBLOGIC PROPERTIES
              # These properties configure a BEA Jolt connection pool for use with
              # the simpapp and bankapp examples, and register a servlet for use with
              # with the simpapp example. The default server address provided here
              # points to a public TUXEDO server that is hosted by BEA for use with
              # this example.
              # Servlet registration for simpapp example:
              #weblogic.httpd.register.simpapp=examples.jolt.servlet.simpapp.SimpAppServle
              t
              # Pool creation and cleanup
              # note this example is set up to work with the public
              # demo TUXEDO server available from BEA's website:
              #weblogic.system.startupClass.demojoltpoolStart=\
              # bea.jolt.pool.servlet.weblogic.PoolManagerStartUp
              #weblogic.system.startupArgs.demojoltpoolStart=\
              # poolname=demojoltpool,\
              # appaddrlist=//beademo1.beasys.com:8000,\
              # failoverlist=//beademo1.beasys.com:8000,\
              # minpoolsize=1,\
              # maxpoolsize=3
              #weblogic.system.shutdownClass.demojoltpoolStop=\
              # bea.jolt.pool.servlet.weblogic.PoolManagerShutDown
              #weblogic.system.shutdownArgs.demojoltpoolStop=\
              # poolname=demojoltpool
              # WEBLOGIC ENTERPRISE CONNECTIVITY PROPERTIES
              # The registrations enable a BEA IIOP connection pool and
              # register servlets for use with the simpapp and university examples.
              # Configure for your environment and uncomment to use.
              # Uncommenting these properties requires WebLogic Enterprise Connectivity
              # and an operating WebLogic Enterprise Server.
              # Servlet registration for simpapp servlet example
              #weblogic.httpd.register.SimpappServlet=\
              # examples.wlec.servlets.simpapp.SimpappServlet
              #weblogic.allow.execute.weblogic.servlet.SimpappServlet=everyone
              # Servlet registration for simpapp EJB example
              # (You'll need to add the wlec_ejb_simpapp.jar to the
              # weblogic.ejb.deploy property in this file.)
              #weblogic.httpd.register.ejbSimpappServlet=\
              # examples.wlec.ejb.simpapp.ejbSimpappServlet
              #weblogic.allow.execute.weblogic.servlet.ejbSimpappServlet=everyone
              # Pool creation and cleanup for the simpapp example
              #weblogic.CORBA.connectionPool.simplepool=\
              # appaddrlist=//wlehost:2468,\
              # failoverlist=//wlehost:2468,\
              # minpoolsize=2,\
              # maxpoolsize=3,\
              # username=wleuser,\
              # userrole=developer,\
              # domainname=simpapp
              # Servlet registration for university Servlet example:
              #weblogic.httpd.register.UniversityServlet=\
              # examples.wlec.servlets.university.UniversityServlet
              #weblogic.allow.execute.weblogic.servlet.UniversityServlet=everyone
              # Pool creation and cleanup for the University example:
              #weblogic.CORBA.connectionPool.Univpool=\
              # appaddrlist=//wlehost:2498,\
              # failoverlist=//wlehost:2498,\
              # minpoolsize=2,\
              # maxpoolsize=3,\
              # username=wleuser,\
              # userrole=developer,\
              # apppassword=wlepassword,\
              # domainname=university
              # WEBLOGIC FILE PROPERTIES
              # Maps a volume name to a path, for client file read/write
              #weblogic.io.fileSystem.[volumeName]=[fullPathName]
              # WEBLOGIC JMS DEMO PROPERTIES
              # CLUSTER USERS: Note that ALL JMS deployment should be done in the
              # per-cluster properties file ONLY.
              # You set up a JDBC connection pool if you want persistent messages
              # (including durable subscriptions). To use JMS and EJBs in the same
              # transaction, both must use the same JDBC connection pool. Uncomment
              # the following property to use the default JDBC connection pool
              # 'demo', which is defined in the Demo connection pool section of this file.
              #weblogic.jms.connectionPool=demoPool
              # The JMS Webshare example demonstrates how the ClientID for a
              # durable subscriber is configured in the connection factory:
              #weblogic.jms.topic.webshareTopic=jms.topic.webshareTopic
              #weblogic.jms.connectionFactoryName.webshare=jms.connection.webshareFactory
              #weblogic.jms.connectionFactoryArgs.webshare=ClientID=webshareUser
              #weblogic.httpd.register.webshare=examples.jms.webshare.WebshareServlet
              # The JMS trader example shows how to use JMS with an EJB. In addition
              # to uncommenting the following properties, you must also set up and
              # deploy the EJB example examples.ejb.basic.statelessSession.Trader in
              # ejb_basic_statelessSession.jar to try out this JMS example:
              #weblogic.jms.topic.exampleTopic=javax.jms.exampleTopic
              #weblogic.jms.connectionFactoryName.trader=jms.connection.traderFactory
              #weblogic.jms.connectionFactoryArgs.trader=ClientID=traderReceive
              #weblogic.httpd.register.jmstrader=examples.jms.trader.TraderServlet
              # Registers the underlying servlet
              #weblogic.httpd.register.jmssender=examples.jms.sender.SenderServlet
              # These properties are used with the ServerReceive JMS example,
              # which demonstrates how to establish a JMS message consumer
              # in a startup class:
              #weblogic.system.startupClass.serverReceive=\
              # examples.jms.startup.ServerReceive
              #weblogic.system.startupArgs.serverReceive=\
              # connectionFactory=javax.jms.TopicConnectionFactory,\
              # topic=javax.jms.exampleTopic
              # These properties are used with the PoolReceive JMS example,
              # which demonstrates how to establish a pool of JMS message consumers
              # in a startup class:
              #weblogic.system.startupClass.poolReceive=\
              # examples.jms.startup.PoolReceive
              #weblogic.system.startupArgs.poolReceive=\
              # connectionFactory=javax.jms.TopicConnectionFactory,\
              # topic=javax.jms.exampleTopic
              #weblogic.allow.create.weblogic.jms.ServerSessionPool=everyone
              # WEBLOGIC RMI DEMO PROPERTIES
              # CLUSTER USERS: Note that pinned RMI objects should be registered
              # in the per-server properties file ONLY. All other RMI startup
              # classes should be registered in the per-cluster properties file.
              # Remote classes registered at startup after the pattern:
              #weblogic.system.startupClass.[virtualName]=[fullPackageName]
              # These examples can be compiled to see RMI in action. Uncomment to use:
              #weblogic.system.startupClass.hello=examples.rmi.hello.HelloImpl
              #weblogic.system.startupClass.multihello=examples.rmi.multihello.HelloImpl
              #weblogic.system.startupClass.stock=examples.rmi.stock.StockServer
              # WEBLOGIC EJB DEMO PROPERTIES
              # CLUSTER USERS: Note that ALL EJB deployment should be done in the
              # per-cluster properties file ONLY.
              # See WebLogic Demo Connection Pool below for a connection pool
              # to use with these examples.
              # Deploys EJBeans. Uncomment the appropriate lines below and
              # modify DBMS-related info and paths to match your particular installation:
              #weblogic.ejb.deploy=\
              # g:/weblogic/myserver/ejb_basic_beanManaged.jar, \
              # g:/weblogic/myserver/ejb_basic_containerManaged.jar, \
              # g:/weblogic/myserver/ejb_basic_statefulSession.jar, \
              # g:/weblogic/myserver/ejb_basic_statelessSession.jar, \
              # g:/weblogic/myserver/ejb_extensions_finderEnumeration.jar, \
              # g:/weblogic/myserver/ejb_extensions_readMostly.jar, \
              # g:/weblogic/myserver/ejb_subclass.jar, \
              # g:/weblogic/myserver/jolt_ejb_bankapp.jar
              # Servlet used by the EJB basic beanManaged example
              # Uncomment to use:
              #weblogic.httpd.register.beanManaged=\
              # examples.ejb.basic.beanManaged.Servlet
              # Add a list of users (set the password with
              weblogic.password.[username]=XXX)
              # to set an ACL for this servlet:
              #weblogic.allow.execute.weblogic.servlet.beanManaged=user1,user2,etc
              #weblogic.password.user1=user1Password
              #weblogic.password.user2=user2Password
              # WEBLOGIC XML DEMO PROPERTIES
              # These properties are required to run the XML examples.
              # Uncomment to use.
              # CLUSTER USERS: Note that ALL servlets should be set up
              # in the per-cluster properties file ONLY.
              #weblogic.httpd.register.StockServlet=examples.xml.http.StockServlet
              # BizTalk example properties
              #weblogic.jms.queue.tradeIncoming=biztalk.jms.tradeIncoming
              #weblogic.jms.queue.tradeError=biztalk.jms.tradeError
              #weblogic.httpd.register.BizTalkServer=examples.xml.biztalk.BizHttpProtocolA
              dapter
              #weblogic.httpd.initArgs.BizTalkServer=bizQueue=biztalk.jms.tradeIncoming
              # WEBLOGIC ZAC DEMO PROPERTIES
              # These registrations enable the ZAC Publish Wizard.
              weblogic.zac.enable=true
              # Set the publish root for a WebLogic Server. Edit and
              # uncomment to use.
              #weblogic.zac.publishRoot=g:/weblogic/zac
              # Set an ACL for each package you publish. The [name] is
              # the "Package name" you assign in the ZAC Publish Wizard.
              # Publish a package, edit this property, and uncomment to use.
              #weblogic.allow.read.weblogic.zac.[name]=[user list]
              #weblogic.allow.write.weblogic.zac.[name]=system
              # HTTPD ADMINISTRATIVE PROPERTIES
              # Enables logging of HTTPD info in common log format and
              # sets the log file name (default is "access.log" in "myserver")
              weblogic.httpd.enableLogFile=true
              weblogic.httpd.logFileName=access.log
              # Tracks HTTPD requests with events delivered to WEBLOGIC.LOG.HTTPD
              weblogic.httpd.enableEvents=false
              # Enables HTTP sessions
              weblogic.httpd.session.enable=true
              # Sets an optional cookie name. The default name is "WebLogicSession".
              # Prior to version 4.0, the default was "TengahSession". To make
              # this backward compatible with cookies generated from previous
              # installations, you should set this property to "TengahSession".
              # Uncomment this line and set this to any string of your choice,
              # or comment out this property to use the default.
              #weblogic.httpd.session.cookie.name=WebLogicSession
              # MIME types
              weblogic.httpd.mimeType.text/html=html,htm
              weblogic.httpd.mimeType.image/gif=gif
              weblogic.httpd.mimeType.image/jpeg=jpeg,jpg
              weblogic.httpd.mimeType.application/pdf=pdf
              weblogic.httpd.mimeType.application/zip=zip
              weblogic.httpd.mimeType.application/x-java-vm=class
              weblogic.httpd.mimeType.application/x-java-archive=jar
              weblogic.httpd.mimeType.application/x-java-serialized-object=ser
              weblogic.httpd.mimeType.application/octet-stream=exe
              weblogic.httpd.mimeType.text/vnd.wap.wml=wml
              weblogic.httpd.mimeType.text/vnd.wap.wmlscript=wmls
              weblogic.httpd.mimeType.application/vnd.wap.wmlc=wmlc
              weblogic.httpd.mimeType.application/vnd.wap.wmlscriptc=wmlsc
              weblogic.httpd.mimeType.image/vnd.wap.wbmp=wbmp
              # In seconds, the keep-alive for HTTP and HTTPS requests
              weblogic.httpd.http.keepAliveSecs=60
              weblogic.httpd.https.keepAliveSecs=120
              # WEBLOGIC JDBC DRIVER PROPERTIES
              # Enables JDBC driver logging and sets the file name for the log
              # The weblogic.jdbc.logFile is placed in the per-server
              # directory (default is "myserver")
              weblogic.jdbc.enableLogFile=false
              weblogic.jdbc.logFileName=jdbc.log
              # WEBLOGIC JDBC CONNECTION POOL MANAGEMENT
              # CLUSTER USERS: Note that ALL JDBC connection pools should be set up
              # in the per-cluster properties file ONLY.
              # For creating JDBC connection pools. This example shows a connection
              # pool called "oraclePool" that allows 3 T3Users "guest," "joe," and "jill"
              # to use 4 JDBC connections (with a potential for up to 10 connections,
              # incremented by two at a time, with a delay of 1 second between each
              # attempt to connect to the database), to an Oracle database server called
              # "DEMO." If more than 4 connections are opened, after 15 minutes, unused
              # connections are dropped from the pool until only 4 connections remain
              open.
              # Every 10 minutes, any unused connections in the pool are tested and
              # refreshed if they are not viable.
              #weblogic.jdbc.connectionPool.oraclePool=\
              # url=jdbc:weblogic:oracle,\
              # driver=weblogic.jdbc.oci.Driver,\
              # loginDelaySecs=1,\
              # initialCapacity=4,\
              # maxCapacity=10,\
              # capacityIncrement=2,\
              # allowShrinking=true,\
              # shrinkPeriodMins=15,\
              # refreshMinutes=10,\
              # testTable=dual,\
              # props=user=SCOTT;password=tiger;server=DEMO
              # Get more details on each argument for this property in the
              # Administrators Guide on setting properties at:
              # http://www.weblogic.com/docs51/admindocs/properties.html
              # Set up ACLs for this connection pool with the following:
              #weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=\
              # guest,joe,jill
              #weblogic.allow.reset.weblogic.jdbc.connectionPool.oraclePool=\
              # joe,jill
              #weblogic.allow.shrink.weblogic.jdbc.connectionPool.oraclePool=\

    Problem Resolved!
              I found out that I had 'http' instead of 'httpd' in the statement where I
              registered my servlet, SqlServlet.
              Now, I am having difficulty with hot deployment. The server is returning
              error 404.
              

  • DADs on WLS 11g (version 10.3.6.0) do not work (Error 404--Not Found)

    Actually we use Application Server 10g (version 10.1.2.3.0) for different Forms 10g Applications (roundabout 1000 Forms) and want to change to Forms 11g and Weblogic Server 11g (version 10.3.6.0). A Test-Application on the Weblogic Server works fine, but DAD’s do not work at all.
    In Enterprise Manager 10g i can configure DADs within the GUI of the Enterprise Manager, where i can see, if a connection could be established or not.
    In Enterprise Manager 11g Fusion Middleware Control this doesn't seem to exist anymore, so i tried to configure the DADs manually, but something has to be wrong or missing, because there is no connection to the database and the following error appears:
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.5 404 Not Found
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
    I added several DAD’s to /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql/dads.conf like this:
    <Location /pls/jd-download-dev>
    SetHandler pls_handler
    Order allow,deny
    Allow from All
    AllowOverride None
    PlsqlDatabaseUsername w_web_user_download
    PlsqlDatabasePassword @BWKChfgPacV6yQL40lIKZqXUUA9wC4cmAw==
    PlsqlDatabaseConnectString jddev TNSFormat
    PlsqlNLSLanguage German_Germany.WE8ISO8859P1
    PlsqlAuthenticationMode Basic
    PlsqlDefaultPage w_anwendung.p_web_show_document
    PlsqlAlwaysDescribeProcedure Off
    PlsqlErrorStyle DebugStyle
    </Location>
    The passwords were obfuscated with dadTool.pl and the http-Server restarted with /opt/oracle/product/Middleware/asinst_1/bin/opmnctl restartproc process-type=OHS
    The files /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql.cache.conf and /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/moduleconf.plsql.conf were left unchanged.
    Our Test-Application generates the following link
    'http://172.106.2.7:9001/pls/jddevdev/B_ARCHIVE.P_ARCHIVE_VIEW?docfid=200'
    that seems to be ok, because when i replace IP and port with our old IAS it works fine, but the WebLogic Server generates the above mentioned error.
    To get some more information i searched an error_log in /opt/oracle/product/Middleware/asinst_1/diagnostics/logs/OHS/ohs1 but there isn’t any.
    I used the following Documentation for configuring the DADs which is for HTTP Server 11g Release 1 (version 11.1.1), because I could not find one for version 10.3.6.0:
    http://docs.oracle.com/cd/E23943_01/web.1111/e10144/under_mods.htm#i1055269
    So probably there are differences between configuring version 10.3.6.0 and version 11.1.1 and so something is wrong configured or missing...
    Thank you in advance for your help
    Udo

    Hi Raj,
    it is a Sparc Solaris 10
    and yes that's my enviorment.
    After some more tests it's seems it's not a real bug but no realy nice working solution.
    Eclipse uses for all instances the same secure storage, where OEPE also saves the password.
    And if I look right the pasword was saved without the user context, so if you use an other user he takes the same password from the old user.
    and I doesn't know how do OEPE check the connection in reality or only reply the last failed login message.
    After deleting the complete secure storage and test it again with the juno version it works well.

  • I want to add refworks grabit to my tool bar, when I try to install for firefox it won' t let me this is what I get: HTTP Error 404.3 - Not Found The page you a

    this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
    Error Summary
    HTTP Error 404.3 - Not Found
    The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
    Detailed Error Information
    Module StaticFileModule
    Notification ExecuteRequestHandler
    Handler StaticFile
    Error Code 0x80070032
    Requested URL http://www.refworks.com:80/refgrabit/install.xpi
    Physical Path E:\RefGrabIt\install.xpi
    Logon Method Anonymous
    Logon User Anonymous
    Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
    Most likely causes:
    It is possible that a handler mapping is missing. By default, the static file handler processes all content.
    The feature you are trying to use may not be installed.
    The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
    If ASP.NET is not installed.
    Things you can try:
    In system.webServer/handlers:
    Ensure that the expected handler for the current page is mapped.
    Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
    Pay extra attention to typographical errors in the expected handler line.
    Please verify that the feature you are trying to use is installed.
    Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
    To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
    The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
    For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
    Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
    Install ASP.NET.
    Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
    Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
    View more information »

    That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

Maybe you are looking for

  • Facebook and skype notifications

    I have a lumia 920 and can't get fb and skype notifications work. The worked just after the installation of the apps, but then they stopped working. The apps are fine, I just don't see toast nor tile notifications. Any ideas? This isn't a borderline

  • How to use the place call step in the script

    I am new to uccx and the document does not explain alot for me related to this step so much. In the destination field : i use a  variable of string that matched before. The call contol group id : i use the integer of 2 ,the same as configured in the

  • Process order IDOC

    Hi Gurus, Please help. I wanted to send "All" details of a process order to a legacy system "immediate". All details includes process order header material, operations, all components and their details. In material master (master data) we can activat

  • HP w1907 microphone?

    I have an HP Pavilion a6112n PC running Vista and an HP w1907 monitor.  I just signed up for a Skype account and tried to make a call.  I could hear and see my friend, but she couldn't hear me.  My Skype message said that it can't detect a mic sound

  • Bose Bluetooth 2 Headset

    I recently purchased the Bose 2 Bluetooth Headset.   This device is totally outstanding from the point of using it in a noisy area such as a supermarket or department store.   My wife asked if I was in the car using my on-star in car phone.   When I