Apple TV Ethernet Port
Quick question,
Is the Ethernet port on my Apple TV suitable to plug in a smart TV, in order to connect the TV to my WiFi network ?
Thanks,
David.
No, the ATV does not provide Internet access to any other device, it is not a hub/switch or Wi-Fi hotspot.
Similar Messages
-
Can Apple TV ethernet port be used as internet "out"?
I have my new Applet TV connected to my network wirelessly and everything is working fine. Given it's connected wirelessly, can the ethernet port be used as an "outbound" network connection? I want to connect my digital satellite box to the internet and the only way to get internet to it right now is to have an Airport Express connected. Seems a waste to have an Apple TV and Express right beside each other just for one more internet connection.
Thanks,Richard Bartrem wrote:
can the ethernet port be used as an "outbound" network connection?
no they can't -
Apple TV ethernet port to XBox
I was wondering if it's possible to use the Apple TV as a wireless hub. What I'd like to do is connect the XBox to it via Ethernet, thereby eliminating the router the XBox is currently connected to.
No, plugging in ethernet disables the wireless connection.
Equally it won't act as a wireless bridge if connected to a router over ethernet. -
USB Ethernet port not working after ML install
After installing ML I cannot get the USB Ethernet port to work. Have searched for andriod file transfer agent but cannot locate it as previously mentioned.
Same Problem over here. Has anyone a good idea how to fix this problem?
After installing ML i cannot get my original Apple USB Ethernet port to work (Macbook Air 2011). -
I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
Which one can I use properly to monitor all the wireless Devices in my housActually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice. -
My Apple TV is a useless brick now. Ethernet port no longer works.
Not sure, but it seems after an update, my ethernet port does not work. I can plug it into the PS3 and works fine. I HAVE TO use WiFi now or my Apple TV is a useless piece of plastic that looks "oh so Apple Cool." Yea, whatever Apple. I have been using this same port for almost 2 years with no issue.
thoughts?It may well be a hardware failure but a few things to try:
Unplug from main for 5-10 mins and restart it.
Reset settings in the Settings menus.
Last resort - try to factory restore to current software using a microUSB cable to hook it up to a computer running iTunes.
Assume you don't have Apple care (even if you did I think it's only 2 years on AppleTVs anyway).
AC -
Dead Ethernet port ATV, will Apple USB connector work?
My ethernet port on my ATV died. I have made sure the cable and switch are okay (by connecting to another device). I have done a factory restore since this port worked until a couple of weeks ago.
Will the Apple USB ethernet adapter and plug this into the ATV to get a wired connection (is the driver in the ATV 2.0 driver library)?
Trying to connect to wireless isn't working on a secure network (tried WPA-PSK, WPA2-PSK and WEP (hex and ascii). ATV sees the network but cannot connect. Using Buffalo Airstation WZR-HP-G300NH. Wireless worked prior to factory restore using WPA2-PSK (was at latest ATV version).Sorry but no. The USB port (without hacking the OS) serves no user-accessible purpose. If the Ethernet port has failed and your Apple TV is out of warranty, you'll have to try and get wireless working. Perhaps if you start a new topic with that issue, someone here can help you get that sorted.
Regards. -
If the Apple TV 2 is connected to my home network wirelessly, is there any way to use the vacant Ethernet port on the Apple TV 2 to extend the network - for example to connect to a Blu-Ray player for firmware updates, online features, etc? I can do latter with an AirPort Express but wondered if i could use Ethernet port on Apple 2 to do the same?
In some ways it would be neat if it could do so though maybe it would dent the sales of the Express.
iOS must have some kind of internet sharing support embedded as we can share over wifi from iPhones.
May be worth sending an enhancement request, it might be feasible you never know.
http://www.apple.com/feedback/appletv.html -
How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?
How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?
You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely. -
Hello,
I have a DSL modem that is also a WIFI router as my main WIFI network from room A. In room B, I have a TC wirelessly joining the existing WIFI network (not creating a new one). That works fine, I have one SSID, and I can wirelessly access the TC disks and backup my Mac on my TC.
Now, I would like to connect a wired device (with on WIFI) to the ethernet port of my TC. Unfortunately, the ethernet ports of the TC don't seem to be "activated" as they do not have internet on them.
More precisely, I'd like to connect a GE Cordless Skype Phone Model# 31591 (http://www.gephones.com/products/skype/dect-6-0-expandable-digital-cordless-phon e-with-skypetm.html) that connects to a router via Ethernet. I'm aware that I could simply connect it to the DLS router, but that's not what I want... Is there any way to activate the ethernet ports of the TC while in "join" mode ? Or do I really have to buy a Airport Express to create my main network and then extend it ?!?Thanks, the reason why I asked again, is because you told me to start another thread with the specifics of the device I want to connect, so I did
Not a big deal, and it is easy to become confused.....but to be clear about this
Your question.....
is there a way I can connect my Bluray player to the TC ?
My Answer.....
Please start a new post for that. Tell us the make and model number of the player and whether you plan to connect using wireless or Ethernet.
so I tried to creat the main WIFI network with a first-generation Airport Express M9470LL/A (802.11b/g, no "draft N" or "n" support) and the TC wouldn't extend it either, is it too old/not supported
Unfortunately, the "extend" setup will only work with "n" devices. The older Express does not have a setting to "Allow this network to be extended", so the Time Capsule cannot pick up the signal.
I'm not sure what else to suggest other than what I already have. I'm assuming that you do not want to buy another new Airport Express. -
Dsl modem failure caused malfunction of ethernet port. In attempt to solve problem I did a clean instillation of Leopard 10.5.4 and then update to 10.5.5 with access to internet through apple usb to ethernet adapter. If I attempt to update software to 10.5.6, .7 or .8 it freezes my network system preferences and computer will no longer shut down. The network connection assistant also no longer sees a connection to the internet throught the usb/ethernet adapter. I have checked they systerm Tech tool deluxe which shows no problems and also used hard drive utility on instillation disk which found no problems. Permissions were also checked as well and no problems noted. Any thoughts as I really like my imac G5.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings. -
Built-in ethernet port not working in unibody Mac Mini
Hi,
So ever since I acquired this new mac mini I haven't been able to get it to recognize any devices connected via ethernet. I obviously checked the cables and all is good there. I tried connecting it to another mac, and while the other machine was detecting a device (the mac mini) at the other end of the cable, the mac mini kept saying that the cable is unplugged or the device off.
After several days of having the issue I decided to remove the ethernet service from the network preference pane to set it up again but to my surprise, the built-in ethernet option was not available (I only got airport, firewire, bluetooth DUN, VPN, PPPoE and 6 to 4). At this point I tried removing the networkinterfaces.plist file form the system configuration folder in the system preferences folder to no avail. I then tried to zap the PRAM, NVRAM, reset the SMU, SMC and all that kind of things to get the port recognized by the system but no luck.
When I look at the system profile I get these weird results in Ethernet Cards:
pci14e4,4353:
Type: Other Network Controller
Bus: PCI
Vendor ID: 0x14e4
Device ID: 0x4353
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x0093
Revision ID: 0x0001
Link Width: x1
BSD name: en0
Kext name: AppleAirPortBrcm43224.kext
Location: /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AppleAirPortBrcm 43224.kext
Version: 425.16.2
Comparing it to other macs I have It should read "ethernet" rather than that strange pci name on top and the kext name shouldn't read airport but something like AppleIntel and in location it shouldn't direct to the IO80211Family.kext package but rather to the IONetworkingFamily.kext.
So I popped in the system install DVD and fired up System profiler and at that point I didn't even get an "ethernet cards" option in the left side pane. So this is leading me to believe that the hardware is not being recognized at all, so maybe it's damaged. I did replace the HDD with a bigger one and change the RAM modules to bigger ones but I don't think I could have damaged the hardware in these processes, also I don't see how this would affect the ethernet port as it's integrated to Motherboard and didn't messed with it at all (I was very careful, to say the least!).
The last thing to do is reinstalling the system but I don't think it'll help (after seeing that the ethernet port is not even being detected by the install OS) but I need to offload all the data from my internal disk and at the moment I don't have an spare drive to do it.
So, what's the recommendation? A field trip to an Apple Store? Closest one is like 3,000 km from where I am right now, so...
Well, thanks for any pointers, suggestions and help in general.I do not have any answers for you. Yes it appears to be reading what should be an ethernet card as an AirPort card. Have you played around with trying to install another version of Mac OS X other than the version that shipped with the Mac mini? Apple has long told us that we should not install a version of Mac OS X that was older than the shipping version. With the Mid 2010 Mac mini, the Restore DVD has the only version of Snow Leopard that will work with this Mac mini's specific hardware. At least until Apple releases 10.6.5. If you have installed other versions of Mac OS X, then erasing the HDD and installing the OS from the Restore DVD(s) that shipped with the mini may get you back to the point you need to be.
Unfortunately I think that you voided your Apple Warranty when you installed the different HDD. That was always a question in the past when folks wanted to open the former version of Mac minis and upgrade the RAM. But with the 2009 models folks started reporting here in the Apple Discussions that Apple was informing them that they had voided their warranty by opening their Mac mini. This new model made the RAM user upgradable, but the User Manual specifically states on page 43, 54 and 61 that there are no user serviceable parts in the Mid 2010 Mac mini except the memory.
Dah•veed -
Mountain Lion Mac Mini Server Ethernet Port Not Working
I have a Mac Mini Server and once I upgraded to Mountain Lion Server the Ethernet port is unresponsive. It worked before upgrading. Is there something with Mountain Lion Server that is causing the Ethernet port not to work properly?
Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.
-
Airport Extreme - creating a wired local network from a cellular hotspot without ethernet ports?
Forgive the book I've written below, please. I generally think too much info is better than not enough... I'm looking for assistance and/or suggestions since I have been unable to locate solutions on my own so far. Searching this forum has found a great number of "sort-of" related things, but all of them so far appear to involve apple-only hardware or upstream network devices which have ethernet ports. Nothing that seems to match my situation enough to extrapolate out. Maybe I'm just using the wrong keywords. Anyway....
I've recently moved to a particularly rural area with no wired internet access to speak of (well, I suppose there is dial-up, but... yeah). I've tried several different wireless varieties including satellite, the AT&T Elevate 4G hotspot and a service that used an EVDO-cellular solution(a sprint-based reseller). The former had serious latency issues which I had predicted and so was right-out. The last had signal coverage problems which their maps did not accurately reveal. Their potential mitigation was to have me invest even more money into a super-mega antenna to be roof-mounted. And even that was an uncertain fix. The AT&T solution with the 4G hotspot has been AMAZING so far and I love it. Coverage is great, latency and bandwidth fantastic.
I love it but for one exception, that is. Connectivity options.
There is a particularly limited number of WiFi connections available and only a USB network adapter for a single computer. None of my wired-only network devices can connect directly and I have significantly more WiFi connected devices in general use than the device supports.
I have an Airport Extreme that I was using as my primary connection point through a FiOS router at my previous home(and both the satellite and EVDO modems at the new place). Never had any problems with it when feeding its WAN port with one of the various routers' LAN ports. However, as has been evident by reading all sorts of posts here and elsewhere, having it connect via WiFi to the Elevate means that the ethernet ports are disabled. Not terribly useful.
The Elevate has no ethernet ports. Only WiFi and USB network connectivity.
The Elevate does not appear to have settings available to create a WDS network-- so it cannot be "Extended" via those methods, either, as far as I am able to tell.
So these are some thoughts I've had. Before I invest the time and money into them(both of which are in extremely short supply lately), I'd like to know if anyone else has already solved the issue or can tell me definitively whether these ideas, or some I haven't thought of, will or won't work. Any helpful feedback or thoughts would be sincerely appreciated.
Options I've considered, but are uncertain:
-A Wifi/Ethernet or even ethernet-only router which has a USB WAN uplink(I've had a few bites on searching, but nobody seems 100% clear on the capability for the models I've located). I could plug the Elevate into that USB port and then from there I'm golden. If this is the best option, then can someone recommend a brand/model that they know will work in this way?
-WiFi Access Point (Airport Express, maybe?) that will connect to the elevate via WiFi, and then use its single Ethernet port to serve as the APExtreme's WAN uplink. (I don't know if this will work at all, actually...)
-Connect to the computer via USB, run some kind of network bridging software (which I don't know what the heck that would be) to bridge between the USB Network and the Ethernet port, then run a hard wire from there to the APExtreme's standard ethernet WAN uplink. This is going to be a "last resort" option since it involves software I'm unfamiliar with, even unsure of availability for Mac, and requires the computer to be running and configured properly at all times. Given the way my kids abuse a computer, I can't be certain of anything involving this option.
-Some secret method of turning on WDS capabilities in the Elevate which would then allow my existing base station to become a second node in the chain. I really wish someone could tell me this is possible if only I'd push the right buttons. I see this is as the absolute best option, if it can be done. Cheapest, anyway.
Current set-up:
AT&T Elevate 4G hotspot
WiFi connected devices(rotating since Wifi connection count is limited): Mac PC, 2 iPads, 3 iPhones, Apple TV, a Nokia mini-tablet, a Kindle fire, Wii, XBox 360, an old dell laptop issued by my office.
Apple Aiport Extreme base station
Wired connections: blueray player, television, satellite TV pay-per-view uplinky device thing.
Please, tell me your thoughts?Had the same issue here. Here is the best solution I have found so far:
Hotspot + Pepwave Max On-The-Go (w/ Load Balancing) + Airport Extreme
I have a VZW MiFi, but I believe this set-up will work with other hotspot devices. I actually have 2 MiFi Hotspots with a monthly allowance of 20G each. They are plugged directly into the Pepwave router (aka, tethered). (Note: you have to have the right cable to do this. The one that came with my Hotspot was only for charging.) If, for some reason, you cannot tether with your Hotspot device, you want a router that offers WiFi as WAN. The Pepwave will do this. The Pepwave is connected to my Airport Extreme via ethernet cable. I have the WiFi on the MiFis and the Pepwave turned off. So the only visible network is my Airport Extreme. The Pepwave is essentially just functioning as a modem.
I used to have a Cradlepoint, but I did not find it very user friendly--too complex for home use. The Pepwave Max OTG is awesome. I got the one with Load Balancing so it allows you to connect up to 4 cellular devices. If you only need the one Hotspot, you can just get the cheaper Pepwave Max OTG. The Pepwave allows me to run off one of the MiFis until I hit my 20G/month allowance, then it automatically switches to the other one. That way I never max-out on my monthly data allowance. Additionally, it gives you a real-time, hourly, daily and monthly running tally on data usage.
The guys at the 3Gstore are excellent and can help you figure out the best solution for your situation.
Maybe you are looking for
-
Cannot modify FSB speed on my 850 Pro5(MS 6545)
I've been trying to modify the FSB speed of my 850 Pro5(MS 6545) but have been unable to. In the Bios, under "Frequency / Voltage Control / CPU Clock", I've tried to put in 133. However, after I save my changes, the POST still lists my FSB speed as 1
-
Buffalo Linkstation is not recognized when plugged directly into mac
I recently received a Buffalo Linkstation and tried setting it up, when i got it all up and running, the lights come on, but it won't connect to my mac, it's connected via ethernet cable I do not have it plugged into a router and don't want to go get
-
I have 4 emails in junk folder, but I cannot access them, all i get is a "no message " sign
I have four messages in my junk folder but I cannot access them, when i click on the folder I get "No message selected" Help
-
"AppManServlet" failed to preload on startup in Web application: "eas"
Hi Everyone, I have a problem with the EAS deployment, I have a distributed installation two HPUX Risc servers, one have the oracle database with the two repositories one for shared services and the other for eas, in the other server we have the Shar
-
Hi all, Can anybody please help me on this one. im reading elemets from a file, The file is structured like this, student number | last name | firstname I store this values into a TreeSet and use a Comparator to sort them, and display them sorted by