Apple TV extremely slow after sleeping
Hi all, My apple tv early 2012 is extremely slow after its slept.. (by slow i mean the wifi connection, both to internet and airplay)... Its so slow you can't hear a song or anything, it keeps cutting in and out.. I don't know why this is and its starting to annoy me..
It has only been happening recently (last two weeks) so far I have tried :
multiple restars = works until the next time it goes into sleep mode or left for a long time
restore = same as above (latest software)
disconnect and reconnect does the same thing.. works until I leave it overnight..
Anyone with any ideas what this could be?
I thought maybe it was my router but none of my other products are doing this : iphone 4 and 5 and two laptops..
There has been no physical damage to the 6 months old apple TV
Thanks all!
I have a macbook. but after the restore home share hasn't been activated.. its with streaming content from the internet with apple tv itself and also airplay runs extremely choppy
Similar Messages
-
Mbp running slow after sleep mode
My MBP runs extremely slow after sleep mode (closing lid). It seems like Safari will take up much RAM. But I use a memory freer which supposedly should solve the problem. So after all I am not sure what is the real cause and what could solve this.
BTW it runs normally after a reboot.
Mine is a mbp 13" refurb purchased in March, 2012.
Processor 2.4 GHz Intel Core i5, 4GB RAMI too have been noticing problems in slow behavior after sleep mode. It has gotten so bad I have been restarting it regularly or shutting down much more regularly. It behaves almost like normal after a re-start.
It is almost like the hard drive is failing? Last time this happened I put a new HD in. I am usually running a large number of different programs, always multi-tasking, which has been a mac fortie. Seems worse with the last few updates. My I mac is 24" imac 2008 model. replaced drive just before apple care expired.
Razz -
Problem description:
My Mac Pro is extremely slow after upgrading to Yosemite 10.10, even while reading my newspaper on PDF
This is my EtreCheck print
EtreCheck version: 2.0.11 (98)
Report generated 17. november 2014 kl. 10.49.28 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: one day 15:45:13
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (290.89 GB free)
Encrypted AES-XTS UnlockedConverting
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] net.telestream.driver.TelestreamAudio (1.1.1 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) Support
Launch Agents: ℹ️
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.torch.update.agent.plist Support
User Launch Agents: ℹ️
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.ltvbit.plist Support
[loaded] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 4.5.5f1 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User Internet Plug-ins: ℹ️
NPRoblox: Version: 1, 2, 8, 25 - SDK 10.10 Support
Google Earth Web Plug-in: Version: 7.1 Support
Safari Extensions: ℹ️
Omnibar
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 207.99 GB
Destinations:
Elements [Local]
Total size: 1.00 TB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Adequate
Backup size 1.00 TB > (Disk used 207.99 GB X 3)
Top Processes by CPU: ℹ️
89% lsregister
3% WindowServer
1% mds
1% sysmond
0% mtmd
Top Processes by Memory: ℹ️
142 MB Preview
125 MB com.apple.WebKit.WebContent
125 MB Finder
86 MB ocspd
77 MB com.apple.WebKit.Plugin.64
Virtual Memory Information: ℹ️
335 MB Free RAM
1.63 GB Active RAM
1.32 GB Inactive RAM
776 MB Wired RAM
17.27 GB Page-ins
345 MB Page-outsCheck out this thread: https://discussions.apple.com/thread/6466590?start=0&tstart=0.
For many users, the Folder Action Dispatcher is the culprit that eats almost all available memory if it is enabled on ~/Library/LaunchAgents. -
my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5
What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't. -
Macbook pro runs really slow after sleep mode
My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
Kind regardsHi Japib
Thanks for your reply. Here is my report:
Problem description:
macbook pro is really slow after sleep mode
EtreCheck version: 2.1.8 (121)
Report generated 4 februari 2015 20:56:34 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 172
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 1:36:41
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Hotspot Shield
[not loaded] com.anchorfree.tun (1.0.1) [Click for support]
/Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
[loaded] com.kaspersky.kext.kimul.44 (44) [Click for support]
[loaded] com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
/Library/Extensions
[loaded] com.kaspersky.kext.klif (3.0.4a41) [Click for support]
[loaded] com.kaspersky.nke (1.6.4a15) [Click for support]
/System/Library/Extensions
[loaded] com.hzsystems.terminus.driver (4) [Click for support]
[not loaded] com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
[not loaded] com.sony.driver.prs2 (1.0.3d1) [Click for support]
[not loaded] com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Launch Agents: ℹ️
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
[failed] com.epson.esua.launcher.plist [Click for support] [Click for details]
[running] com.epson.eventmanager.agent.plist [Click for support]
[running] com.kaspersky.kav.gui.plist [Click for support]
[not loaded] com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
[not loaded] com.trusteer.rapport.rapportd.plist [Click for support]
[running] com.wacom.pentablet.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.anchorfree.ajaxserver.plist [Click for support]
[running] com.kaspersky.kav.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
[loaded] com.tunnelbear.mac.tbeard.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
[loaded] com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Documenten Map (/Users/[redacted]/Documents)
uTorrent UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
BambooCore UNKNOWN (missing value)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 60 Check version
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
Default Browser: Version: 600 - SDK 10.10
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
AdBlock
DuckDuckGo
Save to Pocket
Awesome Screenshot
URL Advisor
Virtual Keyboard
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Squeezebox [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
Destinations:
My Passport [Local]
Total size: 999.83 GB
Total number of backups: 17
Oldest backup: 2013-11-06 17:55:38 +0000
Last backup: 2014-10-14 11:30:39 +0000
Size of backup disk: Adequate
Backup size 999.83 GB > (Disk used 206.70 GB X 3)
Top Processes by CPU: ℹ️
15% mds
5% WindowServer
0% ocspd
0% fontd
0% kav
Top Processes by Memory: ℹ️
223 MB kav
198 MB Safari
155 MB Mail
137 MB mds_stores
77 MB WindowServer
Virtual Memory Information: ℹ️
3.45 GB Free RAM
3.05 GB Active RAM
1.11 GB Inactive RAM
974 MB Wired RAM
1.64 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 4, 2015, 07:21:16 PM /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
Feb 4, 2015, 07:18:08 PM Self test - passed
Hope this will shed some light on the problem. -
IPhone 3G is extremely slow after 4.0 update.
Both my sister and I have experienced our phones to be extremely slow after updating them. The messages take a few seconds to open, same with the apps. Also while typing, nothing will show up then all of a sudden everything you had typed will show up. It just seems like everything on the phone is slow. I've done some research on it, and everyone said to restore it. The people at Apple said not to do that unless it's the last resort. Is anyone else experiencing this?
Why post the same question twice ?
http://discussions.apple.com/thread.jspa?threadID=2502909&tstart=0
Also there is already a thread with more then 120 replies on it here ...
http://discussions.apple.com/thread.jspa?threadID=2469914&tstart=0
and here ...
http://discussions.apple.com/thread.jspa?threadID=2473054&tstart=0
Message was edited by: Mr.C UK
Message was edited by: Mr.C UK -
Itunes starts extremely slow after an update of windows 8.1.
Itunes starts extremely slow after an update of windows 8.1.
It takes up to 10 minutus.
If I see the appliction log in event viewer then I see the following errors on the Bonjour service.
For instance:
Client application bug: DNSServiceResolve(a8:fa:d8:3a:1e:8f@fe80::aafa:d8ff:fe3a:1e8f._apple-mobdev2._t cp.local.) active for over two minutes. This places considerable burden on the network.
followed by
SendWakeupPacket error: sent -1 bytes: 10065
What can this be?
Already thanks,
JohnI did all the step with save mode and that didn't gave the same result.
Then I created a new account and there itunes started up normally.
So I contued with the user section.
I removed the itunes directory from
c:\Users\username\AppData\Local\Apple Computer\iTunes
This gave the same result in not starting up.
Then I removed the itunes directory from
c:\Users\username\AppData\Roaming\Apple Computer\iTunes
The a popup appears that the Bonjour Service has been disabled.
I looked in services and saw that is was still running.
But I tried to restart this service and it took a long time to stop this service.
Even if I selected restart the Bonjour Service didn't start.
Manually starting was not a problem.
Clicking OK on the popup let itunes start quickly. And closing and starting it again was also quickly.
So Matt thanks for your answer.
If it happens again I have to see if it was the removing of the itunes directory from roaming or restarting the Bonjour Service. -
My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
Thanks in adavnce for help.Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
"Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update. -
IPhoto is extremely slow after upgrading to OSX Maveric
Has anyone noticed that iPhoto is extremely slow after upgrading to OSX Maverick
I've noticed that it isn't.
There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
I am using iPhone 5C. My wifi is extremely slow after upgrade to ios8. Buffering online video and songs taking forever. What's going on?
I have same problem. Reboot helps for a few minutes.
-
IPhone 3G extremely slow after 4.0 update
Both my sister and I have experienced our phones to be extremely slow after updating them. The messages take a few seconds to open, same with the apps. Also while typing, nothing will show up then all of a sudden everything you had typed will show up. It just seems like everything on the phone is slow.
Message was edited by: casszeroPlease use the search function before posting. There is a post devoted to your topic about six posts below this. Join that one, or one of the thirty others on this topic.
-
Blackberry Z10 became extremely slow after OS update to version 10.3.1.2243
Hi,
My Blackberry Z10 became extremely slow after OS update to version 10.3.1.2243. For example it sends text message 10-15 seconds after send button has been hit.
Can not answer the phone when a caller is calling (answer slide interface is unrespnsovie), if I want to launch any application screen turns black and nothing happens, etc.
Does anyone experience similar issues?
Thank you.
Michal.Hi and Welcome to the Community!
A quick read of this site will answer your final question quite clearly. The "fix" depends on several factors, but given what you describe I recommend you immediately update, via AutoLoader, to the most recent version (.2582)...some of the prior versions contain some particularly challenging issues, which are reported to be fixed in this version.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
IPhone6 extremely slow after upgrade to iOS 8.2
I just upgrade my iPhone6 to iOS 8.2(apple watch). After the upgrade the phone is lagging and is extremely slow. Just writing a text is a problem waiting in-between inputs.
Has anyone else had issues with speed and use their iPhone6 after the upgrade?
/Henrikhbhansendk wrote:
I just upgrade my iPhone6 to iOS 8.2(apple watch). After the upgrade the phone is lagging and is extremely slow. Just writing a text is a problem waiting in-between inputs.
Has anyone else had issues with speed and use their iPhone6 after the upgrade?
I have not had a problem with speed. Sometimes a laggy iPhone can be the result of memory fragmentation in RAM (not in storage). It shouldn't happen, because iOS is generally very good about managing memory, but occasionally it needs to be helped. Try the following:
Press HOME once, then double-press it to bring up the Quick Launch screen
Kill each app you see by flicking its screen image up. Continue until all apps except the Home screen are closed
Press HOME once, and wait about 2 minutes for all apps to finish shutting down
Turn the phone off by holding the SLEEP button until Slide to power off appears, and do so
Wait another minute for it to finish the shutdown
Turn the phone back on by holding the SLEEP button until an Apple logo appears.
Let us know if this helps. -
Disk access extremely slow after 10.5.2 Update
I did the update to 10.5.2 today.
1. I tried to update via Software Update. The update started but then stopped with an Error message (Contact Support) and the system freezed. There was just the spinning wheel on blue background for more than one hour. No more harddisk activity. I finally rebooted (hard way). After a reboot I had a somehow upgraded system. But many things did not work anymore (most applications crashed, mail could not access keychain items anymore, etcpp)
2. Then I downloaded the complete Update package to do a manual update (happily firefox still worked). After a manual install it worked. It installed fine and rebooted. Now everything works as it should with the only problem that everything is extremly slow. Starting an application lasts about double the time as normal, loading files takes 3 to 4 times more time than with 10.5.1
To fix these issues I tried several things:
- Fixed permissions
- Cleared all cache files and forced system to rebuild them
- Severall reboots
- Waited until backup completed and Spotlight index was rebuilt
Bootup time is now fine (more or less). Just a little slower than 10.5.1. Application start is still slow but better. But the file access is still extremly slow. This can be observed very well in Parallels which still works fine, but needs 3 to 4 times longer to start (so do all applications within parallels). I checked CPU (Activity Monitor) but could not see anything special.
Any ideas what could be the reason for this behaviour and (more important) how to possibly fix this? I'm thinking about going back to 10.5.1 with time-machine and then try it again with the package install.
Any help/ideas would be appreciated.Is it slow wireless LAN behavior affecting Time Machine? Check out the third page of this thread, specificallly the post by John Albergo about "delay_ack."
http://discussions.apple.com/thread.jspa?threadID=1394485&start=30&tstart=0
It helped me a lot. -
Phone Backup Extremely Slow after install of iTunes 8.01
Is anyone else having problems with slow backups after they upgraded to iTunes 8.01? The sync and backup was working extremely fast after the most recent iPhone updates. In fact it dropped from 15 to 20 mins down to only a couple of mins. After the install of 8.01 it is now taking 3 or 4 hours to backup the phone. What happened???????
I underestimated the time to do the backups in my original post... Now it's taking between 5 and 8 hours to do a complete backup. This is insane. I do have several apps taking up around 390MB on the iPhone. But this wasn't a problem up until this recent iTunes update. I did try moving my iPhone sync cord from my USB powered hub to a dedicated USB port on the PC. No difference. I did notice that once a backup completes the next couple of backups go back to a few minutes. Then on about the 3rd or 4th sync it goes back to taking 5 to 8 hours. This doesn't make sense.... Apple any ideas?
Maybe you are looking for
-
Is there a way to recover a word document that was auto saved before a power outage?
I was working on a document that was previously saved, went to the save the darn thing, and of course the power zapped out. It was in word 2010? and even when searching for "AutoRecovery" files it is not there. just the original document opens, not
-
Sort Order Wrong on Curve 9360
In the Contacts application, I changed the sort to be ordered by Last Name. So now, instead of being ordered as: Adam Smith Alice Jones It lists them as: Smith, Adam Jones, Alice In other words, it is showing the last names first, which is what I wa
-
Is it safe to update my iphone 4s to ios 7.1.1
is it safe to update my iphone 4s to ios 7.1.1
-
Hello ABAPers, Is there any other sites aside from www.sapdomain.com? The site that is free and a good reviewer for the exam. Im planning to take an exam in SAP Certification this September....I dont have any idea about the topic in ABAP Objects and
-
What is the benefit of Transportation planning point ?
Hi Gurus, Need help , i know that Tppt is org. unit , but what is the benefit of Tppt for transportation module? and what function tppt have ? Rudy.