Apple TV fails to project true 16:9 format
I have an Apple TV connected to my Mac Pro and a Sanyo PLV 75 projector. I have made a slide show in Final Cut in widescreen format (16:9) which plays perfectly (i.e. in the correct format) in iTunes. However, when I project this on the big screen using Apple TV and the projector, the top and bottom of the image are cut off and the format is not 16:9.
abqc123 wrote:
I now see that in the sequence I have compressed for use with Apple TV, the frame size is given as 960 x 720.
That may be the issue as you surmised, with it being a 4:3 aspect ratio.
Don't have FCP but in other apps I've often found the AppleTv export options restrictive and opt for a custom h264 export (widescreen) with bitrate <5Mbps.
Suitable options would be 1280x720 at 24 fps (30fps too high for AppleTV, 25 might work), or potentially 960x540 at 30fps or lower.
Does the Sanyo do any sort of overscanning of the projected image - you may need to disable that for your slideshows too or bits may not be included.
Message was edited by: Alley_Cat
Similar Messages
-
I go through all the motions in troubleshooting and uninstall Itunes, but I have not got Quicktime and Apple Software Update to uninstall. I then re-install Itunes but I get an error saying that 'Service Apple Mobile failed to start. Verify you have sufficient privileges to start'. Which I have. Please help!!
I have the same problem, did you find a solution?
-
Hi,
i have the following message when i tried to install LR 5.6
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe Photoshop Lightroom 5.pkg_5.6 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
how can i solve this issue?
I am running on Mac with OSX 10.9.4
thanks in advance
Olivierolebreth wrote:
how can i solve this issue?
A search of the site would probably be a good start:
https://forums.adobe.com/search.jspa?q=dw006 -
I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows
Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H. -
I updated iTunes 10.3.1 today, and now it won't let me openitunes it keeps saying error 7 (windows error 14001) and also says (apple mobile failed to startverify significant privileges to start system services) I have unstalled it severaltimes, tried repairing it also switched off all security software and checkedall files are deleted in local disk (program file) but still no look. Please cansomeone help
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2 -
Hi All, anyone with this problem with Acrobat Pro XI, IM USING MAC, also Yosemite if that helps.
Also Adobe CC, BASICALLY IT just quit and i had to uninstall, re install, and I get this
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1
Anyone with same issues...Same problem. Creative Cloud subscriber running Mac 10.10.2 on iMac (Retina 5K, 27-inch, Late 2014). All apps work fine EXCEPT for Adobe Acrobat XI. I have tried 100 times and 100 solutions. NOTHING works.
-
Keep trying to reinstall itunes on my pc without success. Message keeps coming up saying Service "apple mobile device' (apple mobiledevice} failed to start. Verifyverify that you have sufficent privileges to start system services. What do I do?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Resource control assignment failed for project
I've setup a new project (we run sap), and keep getting the following msg
pam_unix_cred: project.max-sem-ids resource control assignment failed for
project "PAB"
I know you can get this sort of msg if you have wrong syntax in your project, but it all looks well to me. Any ideas gratefully received. cheers Lou
/etc/project >
PAB:1000:SAP System PAB:orapab,pabadm::
process.max-sem-nsems=(priv,2048,deny);project.max-sem-ids=(priv,1024,deny);project.max-shm-i
ds=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny)Hi
The original entries were created with projadd.
I've just done a projdel and another projadd (as below) and watching out for error msgs - will post again when I get the error msgs - cheers Lou
root@sappab # projadd -p 1000 -c "SAP System PAB" -U pabadm,orapab \
root@sappab > -K "project.max-sem-ids=(priv,1024,deny)" \
root@sappab > -K "process.max-sem-nsems=(priv,2048,deny)" \
root@sappab > -K "project.max-shm-ids=(priv,256,deny)" \
root@sappab > -K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
root@sappab > PAB
root@sappab # more /etc/project
system:0::::
user.root:1::::
noproject:2::::
default:3::::
group.staff:10::::
PAB:1000:SAP System PAB:orapab,pabadm::process.max-sem-nsems=(priv,2048,deny);project.max-sem-ids=(priv,1024,deny);project.max-shm-i
ds=(priv,256,deny);project.max-shm-memory=(priv,18446744073709551615,deny) -
Service apple device failed to start - what does this mean?
Can't download itunes on computer. Got message "Service Apple device failed to start". Verify sufficient privileges to start services. What is this?
Hello DEstadt,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
I am not using AD syncronization for resource pool and security groups in Project Server 2010.
When I publish a new Project or try to create a Project web site manually it creates the Project site, but fails to synch the resources.
If I add or change one or more resources at the Project Managers security group at PWA it also fails to synchronize the root site and existing Project web sites.
I looked at the ULS log and appears the the following error:
Add or remove resources from a Security Group error excerpts:
"GeneralQueueJobFailed (26000) - AddSingleUserMembershipInWss.AddSingleUserMembershipInWssMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='36d89522-f218-4bd2-870e-f07c9292435e' JobUID='f083e721-d7b2-4334-839b-fb10b5c0c513' "
"Failed to find the XML file at location '14\Template\Features\ReportServer\feature.xml'
Feature definition missing for Feature 'ReportServer' (Id: 'e8389ec7-70fd-4179-a1c4-6fcb4342d7a0')"
Create a new Project site error excerpt:
"CreateWssSiteContent: Creating project site failed! Project Uid=20450550-17ec-4278-83b0-b86116c63fb9, site URL=http://project.b2w/PWA/Teste 1001 2S, site name=Teste 1001 2S. System.Runtime.InteropServices.COMException (0x8107058A): <nativehr>0x8107058a</nativehr><nativestack></nativestack>The
content type name _$Resources:ReportServerResources,DataSourceContentTypeName;_ cannot contain: \ / : * ? " # % < > { } | ~ & , two consecutive periods (..), or special characters such as a tab..."
My Project site template is exactly the same than original Project Server site template (for test purpose) but created as Project site and then saved as template with another name.
In both cases there are a reference to "ReportServer", but I do not have either a Report Server installed in the farm or the Reporting Services Service Application.
Any ideas how can I correct this issue?
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft PartnerHi Segawa,
In the above thread you are saying that there are reference to "Report Server". Save the template to local file system and extract the template. Now check the onet.xml under "Webtemplates" folder. Do you see the references of report server there.
If that is the case, my suggestion would be to recreate the template without the reference for report server and then test the behavior.
Also, you can even remove the reference in the onet.xml and use some compressing tools to rebuild the wsp file and then use that as template.
Happy troubleshooting...
Vikram Daruru - MSFT -
Please help! apple Russia fails in warranty repairs due to the lack of IMEI numbers IPAD in the invoice. Where to go?
Call Apple and they will send you a box to ship it in for service. Should take less than a week to get it back. Mine was picked up on a monday, and I got ti back on a thursday.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
An Apple User Group -
Hello, i'm trying to download the new verison of itunes, and im getting an error message: Apple mobile failed to start and c;runtime failed. how can i fix this issue
Hi Tatilopez86,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden -
IMac running OS 10.5.8. I cannot use Help (it crashes), cannot send report to Apple (it fails).
BDAqua: Is this useful?
Apr 5 18:12:04 douglas-hintzmans-imac helpdatad[85500]: port 'com.apple.helpdata' created
Apr 5 18:12:04 douglas-hintzmans-imac helpdatad[85500]: *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSCFDictionary setObject:forKey:]: attempt to insert nil key'
Apr 5 18:12:04 douglas-hintzmans-imac helpdatad[85500]: Stack: (\n 2436780011,\n 2512117307,\n 2436779467,\n 2436779530,\n 2546672193,\n 292147,\n 290667,\n 317673,\n 274277,\n 268995,\n 2546691581,\n 2546690468,\n 2500403285,\n 2500402962\n)
Apr 5 18:12:05 douglas-hintzmans-imac ReportCrash[85501]: Formulating crash report for process helpdatad[85500]
Apr 5 18:12:05 douglas-hintzmans-imac ReportCrash[85501]: Saved crashreport to /Users/douglashintzman/Library/Logs/CrashReporter/helpdatad_2012-04-05-181204_d ouglas-hintzmans-imac.crash using uid: 501 gid: 20, euid: 501 egid: 20 -
i cant install itunes it keeps on saying "service apple mobile failed to start" and i keep on reinstalling itunes but i keep on getting the message.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Apple Package Failed to Install Successfully
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.3.0.0 Adobe Photoshop Lightroom 5.pkg_5.3 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
So now what???Thanks but I'm in Apple so no Temp file as in Windows. This is like a journey back in time to the days when you had to feel comfortable accessing and renaming folders on your computer instead of just starting and using the application you have paid for. I assume Adobe were able to take my subscription money without difficulty...
Sent from my iPad
Maybe you are looking for
-
How can I get the value of a custom property from a resource object?
I am trying to get the value(s) of a custom property, called "status" within a method. The method has an object of type IResource available to it. I have tried the following: PropertyName propName = new PropertyName("","status"); value = res.getPrope
-
Time Machine back up made from an external hard drive
Hi...to all Last week i bought a Macbook. I pluged in my external hard drive Maxtor OneTOuch 4 Plus and it did a time machine backup on the Maxtor OneTOuch 4 Plus. The folder that was generated by the time machine on my external hard drive has the na
-
please helpp!
-
I'm trying to create a flyout menu using CSS (first time). I've gotten it to work on Mac platforms fine, but on the PC, IE 6 does not show the flyout submenu. Any ideas? View my site View the CSS example I followed Thanks!
-
When will Lightroom/Camera Raw support the Canon G15?
Hi, I just got a Canon G15 and I can't use the RAW files. I'd like to know if there's a roadmap for supporting the CR2 files for Canon G15 and if there's anything I can do besides wait for an update. Please don't suggest the Canon imaging software, s