Apple tv gen 1 and 2 jerky playback.

I have had this issue since i first purchased atv1 when they first came out....jerky playback/lag/ slight delay..whatever you call it..i upgraded my modem to an N series..i got apple extreme and ditched the belkin..i bought apple express......extended the range......
i bought atv2 thinking maybe it will fix the problem....nope.I have all Apple hardware except the modem and download via wifi..(i have tried ethernet direct and sill the same)...i hassled my ISP and now have around 6mbps.....still have the lag.....i recently downloaded from foxtel..(ethernet) to compare and playback is perfect...what;s the go with Atv....? i am far too gone now to just leave this and accept it as normal...i still have atv 1 on a separate tv and still the same old lag.....any help or suggestions would be most welcome before i ask apple for full refunds of all the movies/tv shows i have bought..i would rather use Apple to buy tv shows and movies than Foxtel in priciple...but i am running out of ideas......when i first went to support originally Apple hadn;t heard of this....?

Same with 3rd Gen too.  I made a movie in Final Cut Pro, exported as SD, 720p and 1080p.  Plays back smooth on Mac, iPad, iPhone etc... but on AppleTV 3rd gen, it's dropping about half the frames.

Similar Messages

  • HT4367 I have tried to restore my Apple tv (gen 3 and win 8.1)

    I have tried to restore my Apple tv (gen 3 and win 8.1) according to the Apple description but it fails. I have tried three different usb cables with no luck. iTunes does not seem to recognise that i have connected the Apple TV via usb. Any suggestions?

    See:  "If your Apple TV still does not respond or if you were unable to follow the above steps"  here >  Apple TV (2nd and 3rd generation): Restoring your Apple TV

  • Apple TV gen 1 and netflix

    Can I use Netflix on my Apple TV gen 1?

    sure problem is that the app can only be paired with the iOS device it's installed on to the Apple TV using the physical remote
    you can borrow or buy any apple remote it's the same remote used for all of them and for apple computers which come with remotes
    setup the remote app on the iOS device and return the remote to the one you borrowed it from
    an alternative could be universal remotes my logitech harmony act fully the role of remote and can be programmed using the computer

  • I have recently updated my Apple TV (gen 2) and now Airplay video won't work.  I can hear the audio, but no video.  I have unplugged, replugged, restarted.  Help! This problem is all post-upgrade.

    First time using this site; not sure if I'm doing it right.
    My apple tv which has always worked beautifully is not picking up airplay from my ipad.  It is picking up the audio, and it will certainly  do that "mirroring" thing where you watch a grainy computer screen on your tv, but it won't work the way it used to.   Any help?  I have plugged and unplugged, reset and restarted everthing to no avail.  Icons are available, I see the apple tv option on all devices but it just won't do it's thing.  Help!
    Thanks, everyone, in advance.
    Sitz.

    Hi, sitzmark128.
    Sometimes a simple power cycle of your your wireless network can resolve some AirPlay issues.  I would also recommend closing any open applications in multitasking and restarting the device.  If unfamiliar with multitasking, I have included a screenshot on how to process an application close.
    If the issue persists after processing these steps, see the article below. 
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Cheers,
    Jason H. 

  • HT201335 Hi I have an Apple TV Gen 2 and an iphone 4S.  I am able to see the Airplay icon on my iphone however when i press it there is no mirroring slider button. I have latest software on both devices. I can only here audio but no video for real racing

    Has anyone experienced same issue?

    I have read of others having had this button dissapear. Apparently if you totally shut the pad down and reboot it will then reappear.
    Hope that helps

  • Jerky Playback Solved

    I optimized my new Dell Vista PC for Premiere by doing a clean install and adding a 3rd internal drive.
    When I finally got it working again I reinstalled CS4 I was delighted to find the jerky Premiere fast forward playback problem gone.
    Then I installed the 4.1 update and the jerky playback returned.
    I uninstalled the updated CS4 and got back to 4.0 and the problem was gone.
    Is it hardware or software that caused my problem and what problems will I encounter because I am not using 4.1?

    Francis,
    Can you do me a favour by going to the second link included in the one below, read the second part carefully and respond with the requested information, Speedfan, ProcExp, DXDIAG and the like. I find it strange that the 4.1 update would cause this.
    Some suggestions

  • My main PC with my Itunes Library just crashed.  I still have all my music on Apple TV, Ipod Touch (Gen 2), and Iphone 4 (verizon).  How can I get everything set up on a new PC and working ?

    My main PC with my Itunes Library just crashed.  I still have all my music on Apple TV, Ipod Touch (Gen 2), and Iphone 4 (verizon).  How can I get everything set up on a new PC and working ?

    I downloaded Itunes 10.2 on new desktop, ran sync with my ipod touch (Gen 2) and have all my music on new PC.  Just can't get it to sync with my Apple TV (Gen1).  I have made music purchases on Apple TV and cannot get them to Ipod/Iphone?  Help

  • I've just installed iTunes 11, and now my playback shuts off on Apple TV. Suggestions to fix?

         I've just updated my iTunes to 11, and now my playback shuts off on Apple TV after a few songs. My Apple TV is up to date and everything worked just fine yesterday. I've restarted everything and think I've checked all settings that might affect the shutdown. This is very frustrating as I was putting together a presentation for a party. I'm on Mountain Lion (all up to date too).
         Help, please. I'm out of ideas and ready to reach for the hammer.

    Posted this in another forum -- maybe it will help you. 
    Round number 2.  Updated iMac and Windows7 PC to iTunes 10.5.1 (42).  Home sharing broke again!  Verified working prior to my update on Windows PC and Apple TV2.  Tried a lot of things to make it work, but here is what I had to do:
    1) Rebooted my router (all but ATV2 is wired ethernet).
    2) De-authorized/Re-authorized both iMac and Windows PC; rebooted both
    -- This got home sharing to work between both computers; ATV2 still was not working despite turn off/on home sharing, reset, change IP, etc.
    3) On iMac, turn home share off, then back on.  Now all three working.
    In the end, I might have just tried step 3 (turn off/on Home Share on iMac), but now I've no way to verfiy -- that is until the next new release of iTunes.
    Apple -- this is crazy.  I enjoy your products but having to run through these steps every time is a turn off. 

  • New apple user, just got new iPod touch gen 5 and there is no App Store on it. Restored it twice and this does nothing. What do I do, help please :(

    New apple user, just got new iPod touch gen 5 and there is no App Store on it. Restored it twice and this does nothing. What do I do, help please :(

    Has it been disabled via Settings -> General -> Restrictions?
    I assume you have checked other pages of apps by swiping to the left from the home screen?
    B-rock

  • My Apple TV gen 3 has stopped downloading Netflix shows. I have logged out and in from Netflix. All of my other Apple products work fine with Netflix.

    My Apple TV gen 3 has stopped downloading shows from Netflix. All I get is an error message. I have logged out and back into Netflix. All of my other Apple products work well with Netflix.

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • TS4425 hmmm. I haven't got that notificaton. I use an Iphone 4 and a 2' gen IPad, but non of the devices let me accept the conditions. So I can't ude photsream on my apple tv2 gen.

    I've got a problem to use Photo Steram on my Apple TV, because Icloud said that someting had change. I would have to accept the terms, I haven't got that notificaton. I use an Iphone 4 and a 2' gen IPad, but non of the devices let me accept the conditions. So I can't ude photsream on my apple tv2 gen

    I've got a problem to use Photo Steram on my Apple TV, because Icloud said that someting had change. I would have to accept the terms, I haven't got that notificaton. I use an Iphone 4 and a 2' gen IPad, but non of the devices let me accept the conditions. So I can't ude photsream on my apple tv2 gen

  • HELP! Jerky playback on Premiere Pro 6.0.2 CS6 and Retina MBP (16GB)

    Dear all!
    Please help me to solve this problem!
    It's going on Premiere Pro 6.0.2 CS6 and Retina MBP with 16GB RAM installed.
    CUDA Driver Version: 5.0.24
    MacBook Pro Retina, Mid 2012
    Processor  2,7 GHz Intel Core i7
    Memory  16 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GT 650M 1024 MB
    Software  OS X 10.8.1 (12B19)
    Adobe Premiere Pro CS6 (6.0.2. - 072)
    While playing back inside PP a jerky playback occurs, every 1-2 seconds it rewinds to 2-3 frames back and continues to play forth...
    No special console messages or something similar visible.
    Have tried to clean the cache but it doesn't help. Also have tried to switch the mode between CUDA, OpenCL and SW - without any visible changes...
    Exhausted... Please HELP!!!!

    avrbox, I had the same problem and went crazy because I didn't find a proper solution. I use Windows, though. Finally, I got to fix the problem. I use a i5 processor, which I overclocked with an asrock tool that came with the mainboard (to about 3350 MHZ where the system ran stable). When I turned overclocking off, Premiere played back the clips just fine. I overclocked then step by step until the playback went jerky again and kept that frequency. Maybe your processor is overclocked by stock or you did it manually?
    Hope this is your solution!

  • Panning and scaling image stills - jerky playback

    when I render out a movie of my project that has still images that are
    panning and zooming the playback of those stills is a bit jerky
    How can get the motion so its smooth and does'nt stutter
    any help would be very helpfull

    Rick Gerard wrote:
    If your computer is up to the data rate required by the codec and frame size, and the image is still juddering then you're in the world of wrong panning...
    Unfortunately that is not always the case...
    Below a scenario that has been driving my nuts, nuts :
    On ANY Mac when viewing in quicktime the following applies:
    (Before anyone is tempted to say 'But my Mac will play back 1080p' - mine TOO.... But NOT when moving 1080x1920 pixels
    over an extended amount of time!!!)
    1) Boot up you Mac
    2) Prior to launching ANY others apps, launch the quicktime player with the 1080p pan
    3) Use the Plus-Minus keys to set the QT window to half size.
    4) Hit play. Shot play wonderfully.
    5) Open Premiere Pro or After Effects and do an hour's worth of intensive work.
    7) Close all the adobe apps.
    8) Open the QT player and try step 3 and 4 again.
    On my Mac which is about as fast as they come... THAT movies which used to playback VERY smooth now looks as if
    someone is having an epileptic seizure !
    Do a restart and it all looks smooth again. Work an hour in the two a.m. apps or other apps for that matter and your are back
    epileptic seizures....
    No matter how much one would like his movies to playback on a computer..... As of today, I have yet to come accross
    a CPU capable of moving 1080x1920 pixels SMOOTHLY over an extended period of time.
    Hopefully, the future holds more for CPU-viewing of Video !!!

  • I have iTunes 11 on a Windows 8.1 PC. It is streaming to a 3rd Gen Apple TV. Movies and TV Shows seem to play fine. Music will stream for about 10 - 16 songs, then just stop. I have to reset everything, then it will repeat the cycle. Wire or wireless.

    I have iTunes 11 on a Windows 8.1 PC. It is streaming to a 3rd Gen Apple TV. Movies and TV Shows seem to play fine. Music will stream for about 10 - 16 songs, then just stop. I have to reset everything, then it will repeat the cycle. This happens regardless of wire or wireless connection. I would suspect that there is something wrong with the network, or Apple TV, except that movies and TV Shows seem to be fine. My music library is about 3700 songs, all legit, either imported from source or puchased through iTunes. This one has me stumped and frustrated!

    I thought that may have been the case too. I set the power settings to compensate but still the same. I also done things like reset the router and Apple TV to factory. Starting to think it may actually be the Apple TV, but it just doesn't make sense ?!?

  • Jerky Playback and freezing

    When in editing mode I am getting occasional freezing and jerky playback but the sound track continues to run. The same in full playback
    The machine is a new 24" 3.06 so I doubt it is a lack of resource problem. Any advice would be appreciated.

    oldmovieguy,
    Hmmmm...maybe we're on to something!
    I did begin another thread, to draw attention to this specific problem we've isolated. Hopefully, between the two of us, we'll figure this thing out! It is VERY annoying. Especially, since creating a movie in the new Imovie 09 is a snap. Luckily, I had marked all my good footage with a star, so I can recreate a project in a jiffy!
    Message was edited by: JBK

Maybe you are looking for

  • Report as per Customer Account Assignment group or Material Account Assig

    Hi, I require report as per customer account assignment group or material account assignment group. Can you please tell me how to fullfill this requiremetn. I have go for ZReport or any standard report is available. Regards, ch.srinivas

  • How to Show Graph

    Hii     I have issues showing Business Graphics in SAP . My exact issue is that i have to show data in a table which has the following format : Date - Val1 - Val2 - Val3                    Now there can be any no. of rows in this table and i have to

  • What's wrong with my iPod 5?

    I put my ipod to charge and the apple sign showed up and everyhting. It kept turning on and then off, and after it did that many times it showed the low battery sign. My iPod did this many times and it didnt go to my lock screen. So after waiting for

  • How do I install a Forum in Adobe Muse?

    I am designing a website that requires a Forum..  Could anyone tell me how to do this Thanks   [email protected]

  • Adding existing subversion project to an Oracle database project

    Is there an easy way to add an existing set of files to a new ODT project? I'd like to be able to get the latest version from SVN and then place my oracle database project in the same directory. I can "add existing item.." just fine but the problem i