Apple tv gen 1 only shows logo and black and multi colored stripes

My ATV sarts up with all the normal music sound however the screen only displays the apple logo with a background of horizontal black and multicolor strips. The strips about 1/2" wide are set in three sections across the screen. The center section strips are offset by one strip from the two end sets.
Is this a video board issue or something else?

Sounds like a graphics failure to me, but I suppose it could be the HDMI cable. Try a different cable and try restarting the Apple TV by removing ALL the cables for 30 seconds, but I fear the worst.

Similar Messages

Black or multi-colored strip an right hand side of copies

My C7280 was not used for two weeks. When I returned home, the printer prints a black or multi-colored line about 1/2 inch wide down the right hand side of the copy. I ran the print dead cleaners three times. Any ideas what is wrokng?

Hi peggymay.
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are having issues with black lines on your scans or copies. I have had this issue myself on my very own 8600 and I was able to get it resolved. The issue actually stemmed from two locations and with any luck we can get this issue resolved for you. First thing to look at is under the scanner lid. Lift the scanner lid and to the left of the large scanner glass, you will see a small strip of glass. Please take a light glass cleaner and a lint free cloth and clean the small glass area as well as the big glass . On the under side of the lid, you will see a white plastic strip. Please clean this as well. IF you have already done these steps then please move on to the next step.
The printer power cable needs to be connected to a wall outlet and NOT a power Bar/Strip. HP printers already have a built in surge protector and if you have it plugged into a Bar/Strip, the printer will NOT get all the power needed to function properly and it will cause issues with scans or copies and it could even generate false error messages on the printer display screen.
Please try these steps and if they work, Fantastic. But if they don't, please feel free to write me back.
Thank you so much for your time. Always happy to help.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My iPad only shows up in black and white. It's like looking at a film negative.

My iPad screen and all functions are all in black like an old picture negative.

Go to Settings>General>Accessibility and turn off White on Black.

HT1551 my apple tv is only showing apple logo and the white light keeps flashing what do i do

my apple tv is only showing apple logo and the white light keep on flashing can anyone help

You have to restore the device using iTunes
Apple TV (2nd generation): Restoring your Apple TV
support.apple.com/kb/HT4367
You need a micro-usb cable and the ATV must be in DFU mode (Hold down the menu and play button for 7secs)
Apple TV (1st generation): How to perform a factory restore
support.apple.com/kb/HT3199

TS1702 iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. Have tried to reset it (not responsive), link to iTunes (not recognized), etc.

iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. I have tried to reset it manually and via iTunes (not responsive), linked it to iTunes (not recognized), etc. Nothing works. This happened after an iTunes updated, after I was asked to "restore" my iPad to factory settings.

Thanks, King_Penguin. Yes, I tryied putting the iPad into recovery mode. It freezes in the black screen with the iTunes and USB cable. When I followed the instructions and then started iTunes, I received the following message: "A required iTunes component is not installed. Please repair or reinstall iTunes (-424040)".
I have unistalled iTunes three times already and donloaded and installed three new versions. No luck.
Thanks a billion once again!

HT201263 iphone only shows logo for 13 seconds when connected to pc thats all it does however i connected to wall socket it goes up to connect to itunes but when i unplug it then it switches off

iphone only shows logo for 13 seconds when connected to pc thats all it does however i connected to wall socket, it goes up to connect to itunes but when i unplug it then it switches off.
this is coincidently after an ios update for iphone which i did just approx two days earlier which was suppused to fix battery issues?
also battery shows 100 percent full but as i explained if disconected from socket it switches off altogether.

Hopefully and most likely faulty battery. If you have Warranty or AppleCare, make Genius reservation and take to Apple for resolution.

I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

Wen I turn on the my macbook it only show the aple icon and it show like it looding sometink or searching for someting and it never open.

wen I turn on the my macbook it only show the aple icon and it show like it looding sometink or searching for someting and it never open.

May need to grab a micro usb cable and restore via iTunes
http://support.apple.com/kb/HT4367

I just received my iPad2 today. When I turned it on it only showed a USB cable and the ITunes icon. What does this mean?

I just received my iPad2 today. When I turned it on it only showed a USB cable and the iTunes icon. What does this mean?

The first thing that needs to be done with a new iPad is to activate it by connecting it to a computer running iTunes (version 10.2 +).
Getting Started guide : http://support.apple.com/kb/HT4053
The iPad manual, which also has a chapter on getting started can be downloaded from here : http://support.apple.com/manuals/#ipad

How do I customize the CNN and Wall street journal apps on my iPhone 6 to only show news about business and technology, and not shootings or murders?

How do I customize the CNN and Wall street journal apps on my iPhone 6 to only show news about business and technology, and not shootings or murders?

First, we are not Apple, we are other users like you trying assist with hardware problems. We cannot help with warranty issues.
Unfortunately, Apple cannot and will not help you unless your iPhone is returned to the US (in person, not by international mail). The warranty is not international. This topic has been discussed on this forum since before the 5s was released. Please tell all of your friends not to buy an iPhone in another country unless they are willing to forego warranty and service from Apple.

Apple tv is only showing a white apple.....

Apple tv is only showing a white apple..... I have tried to reset (meny and down on the remote), and i have also piller out the power. The little lamp is blinking, an in the middel of my television there's a big white apple..... Anyone? Thanks

AppleTV 1 or 2 ?
If AppleTV2 I suggest you get a microUSB lead and hook it up to a computer running iTunes in order to factory restore it - do not use a power lead or HDMI.
AC

"Search" function only shows my recent search and no longer lets me search for a song of my choice

Before when in iTunes Store, I could simply choose search and then type in what song or group I wanted then pick a song to download.
Now it only shows my last search and there isn't a way to enter anything.

Hi Mr smith1971!
I have a couple of suggestions for you regarding troubleshooting for this issue. First, I would recommend that you force close the app you are using, then relaunch it to see if the issue is resolved:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If the issue is still unresolved, you may want to try to perform a reset on your device following the instructions below:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Take care, and thanks for visiting the Apple Support Communities.
-Braden

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

Image contains camera White Balance setting; LR 5.5 only shows "As Shot", "Auto", and "Custom"

I have a new, Panasonic DMC-GX7. I shot a bunch of photos as JPGs. When viewing their Exif data using Exiftool, I can clearly see the camera's White Balance setting, as well as the Color Temp Kelvin, WB Red Level, WB Green Level, and WB Blue Level. However, Lightroom 5.5 only shows "As Shot", "Auto", and "Custom" when I click White Balance under Quick Develop on the Library tab or WB under Basic on the Develop tab. Exiftool shows the Exif Version as 0230 and the Panasonic Exif Version as 0405. Is LR looking for the white balance information in some other field? Do I need to configure it somehow for my camera? I am new to LR (but not to image processing), so could use some help figuring this out.

The whole question is not so simple as converting to DNG. Yes DNG is openly documented, yes the file can be read, but that does not mean it can be correctly interpreted by other software in the future and the best you can then do is starting the PP of your images from scratch. Imagine a DNG with LR adjustments that in some years you open the file in another software, possibly non-Adobe. Even if the file can be read it will not look the same, as the Adobe specific developing instructions could not be strictly followed. Even if all software manufactures agreed on a common set of adjustments, let's say everybody had a Highlights slider and a Clarity slider and so on, which is unlikely, the results would still be different as the underlying algorithms would be different.
Disclaimer: I only shoot raw and firmly believe it is the best option, but one must be conscious it has some shortcomings related to the future of our images.

Why is some of my iTunes artwork showing up as black and white?

I have already posted this issue here (Reddit) but I guess I'll make a post here too.
I'm having a major problem with iTunes on Windows 7 (64 bit), where my iTunes artwork is showing up as black and white, and videos play with a majorly distorted output. (http://imgur.com/TQXA9OH)
No idea how to fix this, but if I copy paste artwork in from somewhere else, it works fine, however if I download album artowrk using iTunes' built in feature that automatically does it, 75% of the time the album artwork turns out black and white. What's even stranger is that on my iPhone the artwork is fine, but on my iPod Classic it shows up as black and white too. Videos play fine on both devices, but are still distorted in iTunes.
Can anyone help me fix this? I'm running the newest version of iTunes.

In your sync boxes for TV shows have you checked the box for remove after viewing and/or don't sync after viewing?

What are the recommended plug-ins for HDR and Black and White?

What HDR and Black and White plug-in software does anyone suggest for Aperture 3?

There is a tremendous amount that can be done re: grayscale with Aperture's adjustments. I'd look into those, first:
- The "Black & White" Brick. Keep the total of the percentages to 100 in order to not change the overall luminance much, but by all means play around until you understand what the sliders are doing. Note that you can change the hues using the Color Brick (also WB, Tint, etc.), and use that to set up your conversion done with the B&W Brick.
- The "Color Monochrome Brick. Open up the color selector and skim the eyedropper cursor over the gray scale below the colors grid.
- All of the Bricks which affect the luminance distribution (viz.: Exposure, Curves, H&S, Levels, etc.)
The Nik plug-ins are universally good (they are several, including NR, B&W, and HDR tools). (I disapprove of the engorgement of filters, many of which do similar things and none of which specify what they actually do.) If you end up with the Nik Suite, I suggest installing it as PS plug-ins, and using PS as your external editor (with, if you're up for it, each Nik tool assigned to it's own layer). Using more than one Nik plug-in on the same image in Aperture yields an inelegant, possibly destructive workflow.

Apple tv gen 1 only shows logo and black and multi colored stripes

Similar Messages

Maybe you are looking for