Apple TV Gen 2 - "sleep shortcut" doesn't work with latest software update.

I used to be able to hold down the "select" button when on the Apple TV home menu, and the box would go to sleep.  However, after the last software update, this no longer works.  The only way to put the box to sleep is to head through the settings menu.  This is annoying and time consuming.  Any ideas why the shortcut was disabled?  Is there something new?  Any plans to fix the "bug"?

YUP..!! Just updated the device and it works fine again... Thank you for your swift reply.. Enjoy your Sunday...
//Jesper

Similar Messages

  • Accessory: Belkin Keyboard doesn't work with latest iOS update

    Hello,
    does anybody know how to synchronize my Belkin bluetooth keyboard with the iPad? Usually what I have to do is only to connect the magnet on the accessory and turn on my iPad's Bluetooth and it synchronizes itself. So when I type something on the keyboard, iPad does realize that I am using an external keyboard hence, I am using the keyboard.
    now, when I connect the magnet on the keyboard, and i type in something, iPad does not recognize this. does anybody have the same problem or know how to fix this?
    Message was edited by: Zhinbei. The problem is solved. I had to re-pair the keyboard with the iPad by press and hold Fn + Pair buttons for 2 seconds until it appears.

    Try repairing permissions with Applications -> Utilities -> Disk Utility.
    There select First Aid.  After that select the hard drive within Disk Utility's window.  Finally click on the button that says Repair Permissions.  A reboot may be necessary to finish the work when it is done.
    Ignore any errors reported.

  • HT201401 4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out l

    4s with latest software update will not power off, text will only vibrate, iPod only works with earphones. When I sync it with iTunes it works until power save mode starts, then back to not powering down, making text sounds, or playing iPod out loud.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • My apple tv seems to have hung up during the latest software update - what should I do now?

    my apple tv seems to have hung up during the latest software update - what should I do now?
    I have not turned it off but it has been stuck in the same spot for 30 minutes now and I'm not sure what to do next since the screen says to NOT turn it off until done. Please help.

    If it hangs much longer you may need to disconnect and then grab a micro USB to restore through iTunes
    http://support.apple.com/kb/HT4367

  • Keyboard shortcuts doesn't work with iOS 6.1.3

    Since I've upgraded my iPhone 5 to iOS 6.1.3, my keybord's shortcuts doesn't work.
    Can you help me?Key

    HI boombadabum,
    I understand that you are having issues with keyboard shortcuts with a custom keyboard layout.
    I also understand that when you press the shortcuts that the menu blinks like it is working, but nothing actually happens.
    As a work around, you may be able to map them out with this add on[https://addons.mozilla.org/en-us/firefox/addon/customizable-shortcuts/]

  • Wireless keyboard doesn't work after latest security update

    Hi,
    I update MacOS 10.6.7 with latest security update and my wirelles keyboard is connected, but keys not work, capslock light doesn't change. I try charge battery, then I replace new battery, but it has no effect. I connect keyboard to another Mac with Leopard system and there's no problem... There's some solution? Thanks

    Try repairing permissions with Applications -> Utilities -> Disk Utility.
    There select First Aid.  After that select the hard drive within Disk Utility's window.  Finally click on the button that says Repair Permissions.  A reboot may be necessary to finish the work when it is done.
    Ignore any errors reported.

  • My Apple TV Gen 1 just doesn't work

    Hello,
    I have setup/reset/setup this device so many times it just drives me crazy. I honestly believe that this technology just doesn't work.
    I have an iMac running the most up to date version of OS X 10.6.5, I have the latest version of iTunes, 10.1.1. I'm using the Airport Extreme.
    I have followed the directions to the letter!
    Please help!
    Thanks,
    Aloha
    John
    I have a number of movies, etc on my pc but to make things easier, i just opted to a custom sync, display only those items i have selected, and chose 3 movies only.
    I can see them on my tv, but when i select play, i always get an error indicating that this device is not authorized to play the content. I have deauthorized/authorized my pc many times.
    I'm thinking about just dumping all my apple products and just stick with a microsoft based pc.

    I am having the SAME issue. Just bought the Apple TV 1st Gen. from AppleStore, then followed the instructions to the letter. I am using iMac 10.5.8, Airport Extreme Base Station, AppleTV, and I have the most up-to-date iTunes and also made sure AppleTV is up to date. I get the same stupid error messages indicating the device is not authorized. Called Apple (no)Support, and was walked through restarting all my devices (like I didn't already try this, but just to make 'em happy, did it again...), didn't resolve the issue. "Steve" was like "...hmm, that shouldn't be doing that..." Really, dude? Maybe that's why I called you. Thanks for your time. Hope you guys enjoy my money I gave you.
    Anyone have any ideas? I am about to pack this thing up and send it back. When I purchase ALL Apple products that are advertised as being able to just plug and go, it should freakin' work.

  • Wireless Music doesn't work with new software

    Hello-
    I can't get my wireless music to work after I update the software to the latest version. The only one that will work is when I install it from the CD. But, I would like to use the most recent version of the software. As soon as I update, the Media Server won't launch on my computer. I am using a linksys WRT54G wireless router. If I check DHCP clients, the wireless music receiver is successfully getting an IP address. I have tried all of the things that linksys suggested (disable WEP, firewall, broadcast SSID, etc...) to no avail. Has anyone gotten the latest media server software to work with WRT54G? I have tried it on both my XP and W2K machine, with the same results (doesn't work).
    Thanks,
    Rich

    <SPAN>Hi Jeremy
    <SPAN>I have the similar problem, I've installed the software on my desktop, no error messages (apart from the certificate) and everything seems to be fine. After about 2 minutes the message appears that the network is not ready and consequently the media server is not running.
    <SPAN>Without the server running I can't setup the Network and the entire system is not working. I could ping it but that was about it.
    <SPAN>I've reset my router, renamed the SSID, tried with and without WEP, MAC, without firewall, opened a new account on my desktop with admin rights installed the software again into a new folder - result still not working, same error message.
    <SPAN>To make really bad, I installed it on my laptop, same procedure and it works fine! So it seem that it has nothing to do with my wireless devices or configurations, there must be a problem while setting up the software on my desktop.
    <SPAN>I really would appreciate your help a lot!
    <SPAN>
    <SPAN>Cheers
    <SPAN>
    <SPAN>Balz

  • Display doesn't work after latest security update

    I have three Apple displays with my MacPro, and after installing the latest security update, one of them just stopped working.
    The status light is still on, and my usb devices connected still function, but I have a black screen and nothing is recognized in the displays system preferences.
    Anyone else experience this? Did my display just die?

    Ut-oh!
    FWIW:
    My 7-year-old 22” Cinema Display, on a 10.4.11 machine, with nearly constant use, now becomes so dim during the screen saver mode that regardless of which saver I use, it becomes no longer visible.
    As soon as the screen saver is activated, I have full brightness (though not as bright as when the display was new), then it gradually fades until the screen is all black.
    Upon awaking, the screen is very dim, and then, over a 90 second period, it slowly returns to normal brightness.
    1. The brightness control is set to max.
    2. I have toggled the brightness control and changed screen savers, both to no avail.
    3. Recalibrating the display did not work.
    This seems to have occurred on the same day I installed the latest Apple Security Updater.
    Very weird...

  • IMac doesn't work after last software update

    After last Apple software update (new Safari and security stuff), my iMac 20"/2GHz enters in an on/off loop. It starts but it doesn't manage to load the OS, it shuts off, it restarts, it shuts off and so on.
    Does anybody have the same problem?
    Thks

    Was your update download interrupted in any way? if so, then the computer is trying to find the downloaded files and because the download wasn't completed then it's causing the loop. That's exactly what happened to me. My computer was shutting off intermittent and it did on an update download, so it caused a loop at that's now your case, then never mind.

  • Safari doesn't work properly after software update

    After I've updated my MacBook Pro with the latest software I can't go to most of the websites, I want to visit. It just doesn't load 100%, sometimes I can't see anything but a white page, and sometimes I'm only allowed to see 50% of the page. Why is that? It seriously kills me! Please help. xx

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • EMET doesn't work with common software in Windows 7

    I installed EMET 5.0, and began to have problems with EMET shutting down Acrobat Reader, Flash, Java, Internet Explorer, and browser linkage to .PDF files.  Also,  I could not load a .PDF file directly either.  (No way to view the PDF docs
    for EMET!)
    Error messages included "simexecflow", EAF mitigation  and need to turn off "Deep Hooks", and others.
    I installed EMET about a month ago, didn't notice immediate problems, but a large set of Windows updates happened soon afterward (installed 11/8/14).  Soon after this I first noticed the problems.  I can't say for sure they weren't there before,
    since the time between was short.
    I (I think) managed to stop the Java and Flash problems with settings, but could not get others fixed.  I finally had to uninstall EMET to fix ALL the problems !
    We also have a Vista and an 8.1 machine, no problems with EMET (so far!).
    I know that EMET may have problems with some applications, but it seems to me that there should NEVER be problems with these very common and essential applications.
    Please either fix the problems with EMET, or tell me specifically what's needed to make these apps work with Windows 7 and EMET.
    This machine has been thoroughly checked for all manner of malware, including rootkits.  All clear.
    Thanks!

    Microsoft released EMET 5.1 on November 10th which fixes compatibility issues with those programs under EMET 5.  Here's the information on the fixes:
    http://blogs.technet.com/b/srd/archive/2014/11/10/emet-5-1-is-available.aspx.
    "Several application compatibility issues with Internet Explorer, Adobe Reader, Adobe Flash, and Mozilla Firefox and some of the EMET mitigations have been solved."

  • [SOLVED]bbswitch doesn't work with latest kernel(3.2.11.1)

    [ebs@shankar ~]$ sudo rc.d restart bumblebeed
    Password:
    :: Stopping Bumblebee [DONE]
    :: Starting Bumblebee [BUSY]
    FATAL: Module bbswitch not found.
    And due to that, my graphics card Nvidia is always draining power and heating up. How can I fix this?
    UPDATE:
    The only urgent fix for this is to downgrade to linux kernel 3.2.9.1.
    But, I don't like this fix as I installed arch linux because I want to use the latest software.
    Last edited by ebshankar (2012-03-19 05:44:02)

    erdk wrote:Hmm, I've also have newest kernel with bumblebee, bbswitch and nvidia, but instead of normal versions I've installed dkms-* packages (dkms-bbswitch and dkms-nvidia) - so when new kernel arrives these modules are automatically rebuild to match new kernel. You should reinstall this two packages (bbswtich and nvidia) - they be build against new kernel and everything should be ok
    Yes, the dkms versions work fine with the new kernel
    Thanks!

  • My macbook air 11" suddenly doesn't work with some software

    this is the warning I saw: You can’t open the application “Install VectorWorks (A)” because PowerPC applications are no longer supported.
    What's going on?? I erased my hard drive and I reinstalled it the Mountain Lion, and nothing happened. I need some advice. Thanks

    if it's a PowerPC program, there is no way it works with 10.9 Mavericks.  Search the forums and you will see hundreds of similar posts with the same answer.  The only way to use a PowerPC program is with 10.6 or prior.

  • Do the old air port extremes work with the software update downloaded today

    I have the new airport express. I have a two year old airport extreme.  I downloaded the airport software update today and the internet access is not connecting.  I can access the internet on other networks, but not my own.  In the airport utilities my airport express lists ,connection good'.  The airport extreme, even though it has the green connection dot lit, does not have any verbage giving connection status.

    Yeah im 12 and im awsome at all the iPod stuff but not this?!?!?!?!?!! Anyway I have had my iPodTouch since christmas and it was fine loving it up every minute and well today i saw this update.Well my curiosity clicked it and now it has a usb and the iTunes symbol and when i click restore it loads then on my iPod it has the apple and the bar under it loads then about midway it shuts of and has the picture pop back up! Please answer me I will DIE without my music it MY LIFE you dont understand!!! HELP!!!

Maybe you are looking for