Apple TV getting video or audio from external harddrive on wifi N

The only way i can get media to sync is to put it on my mac book pro's harddrive. The external is connected by the airport new N. Has anyone had this problem, this bothers me to have to move data from a wireless external harddrive to the powerbook, just to get it to sink. And yes, I have Itunes looking at the external harddrive. But when i point it local, it works fine. Help please.
Or apple work on a patch for this. Don't make me do this much longer..
roland

I keep my music and unviewed video on my MacBook Pro's hard drive. I have a master backup of my music and all videos, both viewed and unviewed, on an external hard drive connected to my Airport Extreme Base Station. I have a desktop PC connected by Ethernet to the AEBS and its iTunes Library points to the master copy of files stored on the external hard drive. I synched my local iTunes Library on my MacBook Pro with my AppleTV and, when I want to watch a video that is not synched to the AppleTV, I stream it from the remote iTunes Library on the external hard drive via my desktop. Since the external drive and PC are both hardwired to the AEBS, I assume I am getting n speed over the network to the AppleTV.

Similar Messages

Can't get ibook to boot from external harddrive when hitting option key

Hello,
After owning a Pismo Powerbook that had it's hardrive replaced --twice--, i'm all about backing my shtuff up for my ibook.
I picked up a Lacie d2 external harddrive today, and used Disk Utility's Restore function to copy everything from the ibook to the drive. I can boot off the Lacie without a problem when I select it as the startup disk from sys preferences.
But I can't get it to boot from the Lacie when I depress the Option key while rebooting or starting.
any suggestions?
ibook g4 933 Mac OS X (10.4.6)

Let's be sure you are doing it correctly:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the desired boot drive (you will have to wait about 20 seconds before you can make the selection) then click on the large right arrow button. If this is what you are doing and it does not work, then you may need to re-prep the external drive and re-clone.
1. Boot from your Tiger DVD. After the installer loads select your language and click on the Continue button, then select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
After the above re-clone as follows:
1. Open Disk Utility from the Utilities folder.
2. Select the startup volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Drag the startup volume to the Source entry field.
5. Select the backup volume from the leftside list and drag it to the Destination entry field.
6. Check the box to Erase Destination. Skip this step if you've already formatted the drive.
7. Double-check you got it right, then click on the Restore button.

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
See bottom section on AIM 6.5 and 6.8 on XP and Vista.
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or receiving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
Between both of you.
At least one camera (Mac end works better)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
PC end gets AIM 5.9 or Trillian Pro.
The PC end allows the app through the XP Firewall.
AIM 5.9 needs "Tuning" to Camera and Mic.
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
<hr>
AIM 6.5 and 6.8 On Vista and XP
AIM 5.9 or earlier can not be installed on Vista.
AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
AIM have an FAQ page about this
Below the pics is this quote
What do I need to use Real-Time IM?
You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
See items 5 through 13 on this page for alternatives including Web Browser based ones.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

This is the one I have been wating for
http://discussions.apple.com/thread.jspa?threadID=406152
kichat: Look and sound great in iChat!
Ian's First FAQ
Also New Today
http://discussions.apple.com/thread.jspa?threadID=121775
kichat: FAQ 2 - How to get my router to work with iChat?
And
http://discussions.apple.com/thread.jspa?threadID=121665
kichat: FAQ 1 - What do I need to start in iChat ?
11:20 PM Thursday; March 16, 2006

Fastest way to transfer video and audio from MacBook to TV?

Hello All,
Thanks for visiting my page. I would like to transfer video and audio from my Macbook mid-2010 (specs below), and would like to do so with minimum lag. I m aware Apple TV has a feature which allows me to do that, however considering it is connected via either wi-fi or bluetooth (not sure which) I feel streaming an HD movie or playing an MMO will cause significant lag and/or a distorted picture.
So with that said, what is the best way to transfer video and audio with minimal lag?
Also, as a part II of the question, will the picture be distorted regardless if my TV is 60 inches?
Thanks for the feed back!
Macbook Specs:
Processor 2.4 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 320M 256 MB
Software OS X 10.8.4 (12E55)

The easiest and most reliable option is to connect your Mac to the TV wired. Just buy a Mini DisplayPort to HDMI adapter and a HDMI cable to connect your MacBook to your TV. See > http://support.apple.com/kb/HT4241 Image and sound will appear on the TV automatically.
If the adapter and cable are OK, you won't get the picture distorted. Your Mac will try to use the maximum resolution the GPU allows in order to adapt the picture to your TV. It may not support the maximum resolution of the TV, but picture won't be distorted

How do I get Video and Audio Chats with PCs ?: FAQ 3

How do I get Video and Audio Chats with PCs ? (Updated 24/11/05) iChat FAQ 3
Applies to iChat 3.x and iChat 2.x
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
1 Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3
A DSL (Broadband) connection of at least an up link speed of 256kbs.
An AIM or .Mac.com account name.
(hosting Multiple person AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link.
Note: there is also Trillian Which has a Pro version for $25 that can also Video and Audio chat. The Basic just Texts and Audio Chats (AIM does not Audio chat)
Some need the file from item 2 Here
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Nescape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall.
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then, Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound returned to you.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here
My Web Pages
Happy Chatting.
Ralph

Hi Ralph,
Just a type, you misspelled Netscape...
An AIM account/screen name (AOL or Nescape count as well)

What do I need to transfer video and audio from my 2009 Macbook to my television?

I want to watch a movie with my family tonight, but the DVD is broken. I was planning on renting the movie online and transferring the video and audio from my Macbook to the television. What cables will I need to accomplish this? Also, does anyone know, were I to use a Windows instead, would transferring the audio be simpler? (And what would I need to do that?)

Try doing it without a cable!
Use AirDrop, described here:
http://support.apple.com/kb/HT4783
UPDATE - Oh, sorry, I see the article points out the MacBook is too old for AirDrop.
Message was edited by: sberman

Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

Using a first gen iPad. Video and audio from internet sites simply stopped working all of a sudden. Any suggestions? Thanks.

1)access the router web ui
2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
3)do a power cycle
4)check whether the router gets an internet ip add now ..

Atv2 wont play video only audio from my ipad2

my apple tv will only play audio from my i pad2, i have the icon and select apple tv, the sound transfers but the video remains on my i pad2.
it used to work,
hope someone can help cheers

Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please leave details in the comments at the bottom of the User Tip or email me if you don't have commenting privileges.

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How can you use one NetStream to publish video and audio from another NetStream in AS3?

Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen. How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere? I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved. The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

TS3720 I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...

I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Can i stream/see to my Apple TV any Video without Audio?

Can i stream/see to my Apple TV any Video without Audio? I mean that i want see any video on Apple TV, and listen a sound on my iPhone via headphones. How i can do that? Think that this function can be very interesting for everyone.
Thanks

Unfortunately that isn't possible.
If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here

How do I restore files from External Harddrive - Disk warrior cannot rebuild

Hi Guys
I have a External Hard drive that I can see via Disk Ulitity and shows in finder - but I cannot see the actual files and directories, hence not being able to copy them to a new external hard drive
When I connect the External Harddrive to my Macbook I'm getting the message
"OS X can't repair the disk "Untitled"
You can still open or copy files on the disk, but you can’t save changes to files on the disk. Back up the disk and reformat it as soon as you can."
Disk Utility says I have free space so it is recognising the files. I have Time Machine backups on this external harddrive "Untitled" that I need to critical use.
Basically how do I get the files off this external harddrive before it fully stops working? I have tried rebuilding the disk with Disk Warrior but this does not work.
Thank you anyone! I hope someone can help!

Well, I would skip the Firewire since it isn't essential. Connect the backup drive to your new Retina when it arrives, but before you turn it on for the first time. When you then turn it on you will begin in the Setup Assistant where you will have an opportunity to restore your files from a backup drive or another computer. Select the appropriate option. You can then restore (migrate) your Home folder, third-party applications and support files, and system preferences. Once that is completed when the computer restarts you will be all set up in your old Home folder.
Note that you will be transferring files over a USB connection. Depending upon how much data you are transferring this may take a very long time, so be patient. A USB drive's typical transfer rate is about 12 GBs/hour.

Apple TV getting video or audio from external harddrive on wifi N

Similar Messages

Maybe you are looking for