Apple TV headless mode stops working on update 4.4.2

Apple support said the fix will come on the next update. Hope it is soon.
Meawhile we are advised to carry around a TV to initiate a connection via HDMI so that it would work. Once the connection has been established, you can safefly disconnect the tv hdmi and the optical audio will continue to work until you cut off the power to the Atv.

That was my experience - no HDMI connection, no optical - plug in HDMI and optical wakes within 5-10 secs even if you subsequently disconnect the HDMI lead.
I hope you're right that they'll re-enable headless functionality as AppleTV can then double as an Airport Express withgout needing both.
AC

Similar Messages

  • Apple TV3 Wi-Fi stop working after update

    I update my Apple TV3 few days ago and now when I go to connect my Apple TV3 to the internet no Wi-Fi networks show up. Anybody here can help? it work fine with ethernet cable also I reset to factory setting but still when I go to Wi-Fi it dosent show any network.

    is the wifi option greyed out?
    reset network settings
    settings-general-reset-reset network settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    if no result you need to restore device
    http://support.apple.com/kb/HT1414
    set up as new if wifi is still greyed out then you need to have it repaired
    Peace, Clyde

  • Wifi iPad 3 charger stopped working after updating to iOS 6, help!

    Wifi iPad 3 charger stopped working after updating to iOS 6.  The little iPhone charger charges it very very slowly, but the charger gets really hot after a while.  I restored it and everything works but the charger.  It's only a few months old, should I try a new iPad wall charger block?

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

  • Bedside Mode stopped working / Clock won't kick in while charging

    Hi,
    I recently updated from the earlier factory installed 5.0 version OS to the latest one in my 8530. Every time I connected my BB to my computer the BB manager outputted an immense list of  updates to be done so finally I did.
    Now Bedside Mode stopped working automatically. I'll explain, when I plug in my phone for charging the clock will not kick in and start Bedside Mode even though it is selected in the clock options settings. Instead I have to manually start the clock and then select Bedside Mode from the menu.
    Basically is not just the Bedside Mode is the clock all together because if I select just  Display Clock the same thing will happen, when I plug in the phone the clock won't kick in.
    Meanwhile if I have the phone plugged in and I select Bedside Mode, when I exit the options screen after saving, it will start bedside mode.
    And the same thing happens in reverse, if I unplug the phone while in bedside mode, it won't stop, I'll have to manually exit the mode and the clock.
    Any advice?
    Did I miss to check something in some other settings screen?
    Can the clock be reinstalled?
    Is someone out there with the same problem?
    I need HELP PLEASE!!!

    Hi again
    This problem started with an update. I suggest repeating the update:-
    This what I did to completely wipe my BB. I wrote this before starting and printed it off.
    If your device is functioning, perform a backup now if you haven't already done so saving the file to a place and in a name that you can easily locate on computer.
    I then uninstalled DTM and then deleted all other references to BB/Rim in Windows Explorer thus removing the OS for the BB from the computer in order to ensure that the version I would reinstall would be a brand new downloaded version.
    Get the latest Desk Top Software
    http://us.blackberry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&cp=OTC-DSKTPSW
    and install it on the computer.
    Get the correct latest version of the OS
    http://us.blackberry.com/support/downloads/download_sites.jsp
    and save it to computer.
    To erase all the data on your BlackBerry device, complete the following steps. This option is available with
    BlackBerry Device Software 3.8 and later.
    1. In the device Options, click Security.
    If you are using BlackBerry Device Software 4.1, click Security Options > General Security.
    2. Click the trackwheel and select Wipe Handheld.
    3. Click Continue.
    4. Type “blackberry”. All the data on the BlackBerry device is erased.
    On some new versions of BlackBerry software, the menu navigation is slightly different.
    1. Go to Options.
    2. Select Security Options.
    3. Select General Settings.
    4. Click the Menu key.
    5. Select Wipe Handheld.
    6. Click Continue.
    7. Type “blackberry”. All the data on the BlackBerry device is erased.
    Launch the new Desk Top Software on the computer
    1. Connect your device to your computer.
    2. On the home screen of the BlackBerry® Desktop Software, click Update my device.
    3. Do one of the following:
    * To download an update, click Get update.
    * To view other available versions of the BlackBerry Device Software, click View other versions. If applicable, click another version. Click Install.
    Ensure the new OS is the one you prevously downloaded.
    Do not disconnect the device until the whole process is completed and the device has rebooted.
    After 10 minutes reboot again by removing the battery whilst powered-on and leave it out for a couple of minutes.
    Leave it again for 10 minutes. You should now have a fully functioning BB!
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

  • HT201371 Touch ID stopped working after updating to IOS 7.1.

    Good morning to all,
    My touch ID stopped working after updating to IOS 7.1.
    It was working perfectly until the update and then it stopped recognizing my prints
    I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
    I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
    Also the sensor is clean as well as my fingers.

    Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.

  • My Apple Bluetooth keyboard has stopped working. The top row of keys works but the rest of the keys do not. I was carrying this in my computer bag without turning it off and that is when this started.

    My apple bluetooth keyboard has stopped working. The top row of keys works and the iPad sees the bluetooth keyboard (the bluetooth icon is active) but the other keys do not work. For the past coupld of days I have carried my keyboard in my computerbag without turning it off and I am thinking I have done something to make the letter keys to stop working. Two days in a row I did turn on the music as I carried the computer bag into work so I know that some keys were being activated.

    *UPDATE*
    I have been able to use the Zoom function to zoom in and the keys on the top row no longer are in the non-responsive strip of area.

  • My ifone3gs stopped working while updating...its even nt reading sim..it just shows a connection sign toitune.. whats the prb??

    my ifone3gs stopped working while updating...its even nt reading sim..it just shows a connection sign toitune.. whats the prb??

    It means that your phone crashed during the updating process and is now in recovery mode.  See this article:
    iPhone and iPod touch: Unable to restore

  • My home screen button has stopped working since updating to ios7 (iphone4)

    My home screen button has stopped working since updating to ios7 (iphone4)
    Originally i noticed that it was less responsive but now it does absolutely nothing.
    I have cleaned the button and also tried calibrating (opening an apple app, holding the power button and then the home button)
    Nothing has helped and I am forced to use assisted touch.
    Any help would be appreciated.
    Thanks,
    Craig.

    No advice? I suppose I could try sacrificing an android to the apple gods.....

  • Wacom Tablet causes Apple wireless keyboard to stop working.

    My Wacom tablet/pen causes my Apple wireless keyboard to stop working.  While working on a photo in Photoshop using my Apple (usb) mouse to make selections the keyboard works fine.  When I use the Wacom Pen to make selections, not immediately but anywhere from five to ten minutes into it, I hear what sounds like a chirp from my computer (Mac Pro) and my keyboard stops working.  The command, option, control and direction keys still work but not the number and letter keys.  I have to connect a spare Logitech keyboard via USB in order to continue and not loose my work.  After awhile I will hear the chirp again and the Apple keyboard will start working.  This will continue to occur at irregular intervals.  Without the spare keyboard I've had to reboot my computer (loosing all the work on the photo) to get the keyboard working again, but only for it to reoccur.  Any suggestions to fix this would be appreciated.

    The Mac inherently keeps all input methods active, such that you could type alternate keys on alternate keyboards.
    If you have third party add-ons that might change the way Bluetooth works, those would be the primary suspects.
    Be sure all your Drivers are completely up-to-date, and batteries in battery-powered devices are still strong.
    Bluetooth uses the same part of the frequency spectrum (but a different modulation technique) as cheap WiFi Routers, baby monitors, and microwave ovens. if you live in a busy apartment building, there may be very high levels of interference.

  • Apple IE DAV has stopped working

    I use a PC (Windows) laptop for work and I have itunes installed and use it to manage and sync with my iPad. I use iCloud and iMatch.   I also use outlook and have it synced to iCloud.
    Well, all of a sudden I am now getting this message when I start my laptop up:
    "Apple IE DAV has stopped working"
    Can someone tell me what this means and how to fix it.
    Thanks...

    Well I think I may have kicked this into life.
    Here are the steps that I followed:
    [Important] Backup your bookmarks, I use IE, so I exported them to a bookmarks.htm file for safe keeping. (I also deleted my Cookies and temporary Internet Files, just for good measure)
    Uninstall iCloud control panel
    Reboot your PC
    Once rebooted. Go to your user profile area, Favorites. Delete all your bookmarks under Favorites. (C:\Users\<yourusername>\Favorites\..)
    Download the latest iCloud control panel from Apple. v3.1.0.40 was what I downloaded. Save the exe, don't run it yet.
    Right click the iCloudSetup.exe and Run As Administrator.
    Reboot
    Login, open the iCloud Control Panel. Sign in with your apple ID.
    I am only syncing Bookmarks. So tick Bookmarks. Options->tick Internet Explorer. Click OK.
    Click Apply.
    If you then browse (using Windows Explorer) to C:\Users\<yourusername>\Favorites\.., within seconds you should see your Bookmarks appear, downloaded from iCloud. Check with your iPhone/iPad to see if they match up.
    This has worked for me so far, and there are no AppleIEDav errors (yet).
    WARNING: if you currently sync your photostream, AND you sign-out of iCloud Control Panel, or if you uninstall it, I'm not sure what effect it will have the photostream on your PC. So please be cautious.

  • Apple TV Airplay Just Stopped Working

    Apple TV Airplay Just Stopped Working.  I have a second Apple TV that still works with the same connecting devices and no problems.  Running 10.8 on my macbook Retina, iphone 5 is up to date and ipad has latest.  One day I went to connect and it wouldn't show on my macbook as an available airplay.
    So frustrating, I have reset, re-connected via wifi, turned airplay on and off, checked setting on my machine, made sure I am on the same wifi network... still nothing.

    BTW, I should clarify, I am specifically having a problem mirroring.  Home sharing is on and all my library is there, just no mirroring.

  • Earpiece stopped working after updating to 5.0.1.

    It worked fine the night before.  Then it stopped working after updating to 5.0.1.  I can only hear calls on speaker.  Did anyone else have this problem.  I have tried all the fixes, restart, reboot, restore.  No debris in the headphone jack, and when volume is turned up or down it doesn't show headphones on the screen.  Nothing covering the earpiece.  Tried to blow out headphone jack with compressed air.  I'm thinking it is a glitch in the software.  Using Iphone 4 on Verizon.  Any thoughts or ideas?

    you can try reading the posts listed to your right in the "More Like This" box or by searching this forum.

  • TS4062 I keep getting the error message "apple outlook DAV has stopped working"

    My phone and I pad all of the sudden just stopped syncing with my desktop.  I have had my phone for over a year when 4s first came out and everything was syncing fine.  Then all the sudden it stopped.  I keep getting the error message "apple outlook DAV has stopped working".  I have rebooted, checked for duplicates, signed in and out of the cloud and still nothing.  Has anyone had this problem and know of a good way to handle it.  Also, now my phone and Ipad don't sync with the cloud either.  Please help.

    Windows 7 Professional.  I meant that when I open a word doc and want to turn it into a PDF, i get the same error message.  In the mean time I paid the $40.00 and spoke to Adobe and after 40 minutes, they re-installed Reader X instead of XI so now it works but I am not overly thrilled that I had to pay for it.

  • Apple IE DEV has stopped working! My Photos wont sync

    Hello folks,
    I keep getting a box pop up when ever I start up my computer.
    It says 'Apple IE DEV has stopped working'
    My my Photos wont sync throu icloud. I have tried doing a search through google to help but nothing is coming up. I dont even use Internet Explorer, i use Chrome.
    Can anyone help me please
    Many thanks.
    Hope to hear from somone soon.

    Well I think I may have kicked this into life.
    Here are the steps that I followed:
    [Important] Backup your bookmarks, I use IE, so I exported them to a bookmarks.htm file for safe keeping. (I also deleted my Cookies and temporary Internet Files, just for good measure)
    Uninstall iCloud control panel
    Reboot your PC
    Once rebooted. Go to your user profile area, Favorites. Delete all your bookmarks under Favorites. (C:\Users\<yourusername>\Favorites\..)
    Download the latest iCloud control panel from Apple. v3.1.0.40 was what I downloaded. Save the exe, don't run it yet.
    Right click the iCloudSetup.exe and Run As Administrator.
    Reboot
    Login, open the iCloud Control Panel. Sign in with your apple ID.
    I am only syncing Bookmarks. So tick Bookmarks. Options->tick Internet Explorer. Click OK.
    Click Apply.
    If you then browse (using Windows Explorer) to C:\Users\<yourusername>\Favorites\.., within seconds you should see your Bookmarks appear, downloaded from iCloud. Check with your iPhone/iPad to see if they match up.
    This has worked for me so far, and there are no AppleIEDav errors (yet).
    WARNING: if you currently sync your photostream, AND you sign-out of iCloud Control Panel, or if you uninstall it, I'm not sure what effect it will have the photostream on your PC. So please be cautious.

  • Keep getting error message. Apple IE DAV  has stopped working. Does anyone know how to fix this?

    Trying to link iCloud from my iPad to my Windows PC to share the cloud. I keep getting error message: "Apple IE DAV has stopped working." Does anyone have any idea how to correct this?

    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

Maybe you are looking for