Apple TV Keeps "Forgetting" My Network

OK - love ATV but c'mon... between the incredibly slow streaming times & the amount of time I wait for streaming to "catch up", you'd think I would be frustrated. Perhaps. But what is really bugging me is that on several occasions, I have turned on the ATV to find that it has "forgotten" my network. I have to reprogram it with my WiFi network password, etc... Ugh !! Help !

I had the exact same issue you did for a long time. Very annoying.
My problem ended up being the following: The issue stems from the router having a DHCP lease time of 24 hours. So, once I logged in on the Apple TV, 24 hours later, the lease expired, and the Apple TV could not log in anymore. I set the lease time to be 300 days. I haven't had that problem since, but I'll probably have it on day 301.
All other networking devices worked fine before, so there is something wrong with how the Apple TV does this.
It also might work if you set up a static IP address to the Apple TV, so it doesn't have to 'forget' it's lease over and over again.

Similar Messages

  • Apple TV keeps forgetting Network

    My AppleTV keeps forgetting network and disconnects itself from the network & internet regularly. I have to unplug the power and plug it back again than it connects but after couple of days it disconnects itself again. This happens usually if I watch a movie from the AppleTV. Anyone have any suggestions? Thanks in advance.

    I have the same issue on two 40GB ATVs, one purchased after 2.0 software came out and one was off the first factory run. Both are on N(b/g) networks with WPA2. Both networks are apple airport extremes, not the dual band model but the one just before.
    My Remote.app on iPhone isn't seeing the ATVs when iTunes stops seeing them, so I think the issue is strictly with ATV 3.0.
    SUMMARY, from my experience:
    -Not hardware related
    -Not iTunes related
    -One ATV will hold it's IP address obtained through DHCP.
    -The other says it's connected to the wifi network but has no IP address, despite renewing the DHCP lease.
    -Visibility in itunes "Devices" seems to coincide with Remote.app being able to see ATV.

  • Windows 8.1 keeps forgetting my network credentials

    I frequently need to access files on my (Qnap TS-109II, Samba-based) NAS so I connect to
    \\server\share using the "Remember my credentials" checkbox.
    Alas, I often get errors (e.g. with File History, or just accessing a share from Windows Explorer's "Recent places") because the credentials are not valid: I need to re-enter my password and check "Remember my credentials" again.
    And again...
    Any clue?

    You've probably already thought of this... Have you logged-off or rebooted gracefully after making the connection, so settings are saved. I ask because some folks just run Windows until it crashes or locks up, never giving the system a chance to save registry
    data.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • Im realy getting tired of this.Apple tv2 keeps loosing my password.

    About every 3 or 4 days I have to re-enter my password because apple tv2 keeps forgetting it even after I tell it to remember it.This is becoming very annoying as my password is quite long.Ever since version 4.3 this has happened,never before.All of my other devices have no problem remembering passwords just this little black box.Thanks apple.My logitec keyboard used to work with itunes but after the latest update that dont work anymore either,once again thanks apple.I would rather wait longer for an update that works than get one fast that dont work right.To sum things up I have let apple know about this but have received no responce back what so ever.I have also re-downloaded the new software version 4.3 because the movie section went missing all on its own,nice and still have problems.Funny thing is I own a Thomas Edison gramaphone that is over 100 years old and it still works just like it was new,I think the folks at apple could learn a thing or two from him.So my question is has anybody had this problem and is there a fix for it.Like I said I contacted apple and got no responce so that option is out for me.Having spent thousands of dollars on apple products over the years I am rapidly loosing faith in the company,theyre happy to take my money then leave me high and dry.Thanks apple.

    Thanks for the reply vazandrew,the password is my itunes store one.Im not sure how it could be a network issue because it only started after the latest update.Also my son has the exact same router and setup as me and he has not had any issues,he lives next door and we are on the same internet provider.His password is always rememberd and mine is only rememberd for a few days then it looses it.I have also downloaded the latest firmware update for my mouse and keyboard and that has not helped either.I wish apple would do more testing before releasing theyre updates.I guess its time to change my password to something with as few characters as possable since I have to keep entering it.Thanks again .......Mike

  • Remote app keeps forgeting Apple TV

    Good afternoon! Apple's Remote app 4.2.1 on my iPhone 6 running iOS 8.1.3 keeps forgetting my AppleTV 2 running Apple TV Software 7.0.3. When I open the app, AppleTV isn't an option (other iTunes libraries on my network do appear though). I can get my Apple TV to re-appear temporarily by using the remote that came with the AppleTV to navigate to Settings > Computers > Turn Off Home Sharing and then turning home sharing back on Shortly thereafter, however, the Remote app can no longer see the Apple TV.
    Any suggestions for how I can get Remote to permanently remember the Apple TV? Thanks!

    Is this what you are looking for: http://itunes.apple.com/app/remote/id284417350?mt=8?

  • Hi All. I reluctantly upgraded to IOS 7 last night and now cannot access my home WIFI, all other non Apple devices are fine. I have reset, it will not allow me to 'forget this network', doesnt show the option. I have turned on and off

    Hi All, I reluctantly upgraded to IOS 7.1.1 on my IPAD last night , reluctant as every upgrade which promises fixes which dont impact me causes problems that do , which I fix via this community. Today I can no longer access my WIFI at home, my non Apple devices all work fine.I have tried all the online suggestions I can find for this, reset facgtory settings, it will not allow me to 'forget this network', I try to reconnect and it asks for my password which I know is correct and it says it cannot access my network. It can access an unsecured one I believe, but that is not ideal. Any fresh suggestions would be really welcome, please. Many thanks

    Thanks so much for your reply, yes I did and that has not worked either . A friend has suggested re installing upgrade, so may try that .

  • Our apple tv keeps saying network time needs to be set

    We have been trying for an hour to get our apple tv to work. Network is up
    , signal strength is strong bit we keep receiving message "network time needs to be reset". We have used it for over 2 years without fail.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • I have working Netgear network. Want to add new Time Capsule and run 2nd network for new apple TV and Imac, and keep the netgear network for my PC and Canon printer.

    I have working Netgear N600 dual band router network. The existing network has an XP netbook PC, canon printer, 2 Iphones, Epson Air printer, an Ipad, 3 roku boxes, backup drive. Just bought a new Apple TV box, and time capsule 2T.  I have an IMac on order but don't have it here yet.
    My goal is to add new Time Capsule and create 2nd "apple" network for new apple TV, Iphones, Ipad, Epson Air printer and new Imac, and keep the netgear network for my PC, Roku TV boxes, and Canon printer and backup drive.
    The Netgear router, the time capsule and new IMac will be on the same desktop, I dont need to backup my netbook PC to time capsule.
    Where do I start?
    Which device connects to my modem first, the TC2 or the Netgear?
    Is it best wait for the Imac before starting or can the TC2 be set up from my Ipad or PC?
    Thanks.

    It is pretty simple..
    Setup the TC in bridge and plug it into the Netgear.. I would leave the netgear as the main router for now, although in the future you can swap things around. The netgear firmware may have issues with bonjour and airplay/airprint?? Does your ipad print ok now?
    You can setup the TC using Mac, PC (at least up to win7) or iOS.. they all have airport utility available.
    Bridge mode is set differently depending on the version of the utility. This is v5 and how the windows one will look (at least similar to).
    v6 will be as
    With the TC in bridge you will still create a wireless network.. and give it a different name from the netgear.. then all the apple devices can connect to it. Use ethernet rather than wireless if the imac is on the desktop with it. Much faster and better for using Time Machine backups.
    If you run into any issues.. just post the particular issue. It will take a bit of getting used to, but isn't hard.

  • My Apple TV2 keeps resetting when watching NETFLIX. This started about one week ago. I can watch fine from my MAC. Both are hardwired to my Aiport network..

    My Apple TV2 keeps resetting when watching NETFLIX. This started about one week ago. I can watch fine from my MAC. Both are hardwired to my Aiport network.

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • TS4611 I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also after 3 meters away it keeps searching for network! It is the second try and the same issue. Will Apple ever come up with a solution?

    I have just received my second MacBook Air 11" the Wifi connection keeps dropping. Also, after 3 meters away from the rooter it keeps searching for network! It is the second try and the same issues. Will Apple ever come up with a solution? There is a program pack for the connection issue but I cannot believe that this computer wifi keeps connected only while nearby the rooter!

    Applied this update?
    http://support.apple.com/kb/TS4611?viewlocale=en_US&locale=en_US
    If the update is installed aready, you may have to wait until OS X 10.8.5
    update if and when it is relased.
    Best.

  • Forget This Network stopped all access to available network configurations.  How can I enter IP Address, Subnet Mask, etc. to get back the only network available.  HELP!!!!

    I selected Forget This Network on my iPhone 5S by accident. Now I can see the network but none of the IP Address configuration is there.  The phone keeps searching with no result.  Been doing this for 2 days.    I have the IP address information, but I cannot enter it.  I have reset my Network settings, restarted my iPhone, Renewed the Lease.....  I must get wifi soon!!!!  But how? Two weeks ago I had the most current update for my operating system....

     Hey Jeanne,
    The last thing you can try is to reset the network settings on your iPhone. It will clear out the other networks that you have joined. Let me know if this helps. 
    If the screen doesn't rotate on your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/TS3805
    Take it easy,
    -Norm G.  

  • Iphone keeps forgetting wifi wep key

    last Thursday  I took mi  iphone 4s to  apple store otay ranch San diego CA  my wifi was  greyed out  & said  no  wiffi   what  they  did  is they  restore  my 
    Iphone  & updated iOS5.1.1  thw  wifi is  working again  now   My iphone keeps forgetting my home and work wifi wep key. I can connect to it and its fine and
    then i will put the phone down and leave it say 20 mins or even a couple of days and in that time it would have forgotten the wep key and i have to go through the
    whole process again of putting in the wep key. Its only been happening in the last week. I've only had the iphone 3 months and wondering why its doing this
    now. Its picking up networks fine and also conecting to them ok, its just the fact that it forgets the wep key this so anoying . Any help on this would be really
    appreciated
    Thank you.

    There are a couple of threads on this issue.  I did a search on "forgot wep key".  I'd take a look at this one to get some ideas
    https://discussions.apple.com/message/18443331#18443331

  • My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do?  Read more: My iphone 3g is keep searching for network, and the carrier unable to load network list

    My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do?

    Yes, that kind of tallies with my experience ... after 3 days of useless iPhone 3G (BTW, killing 3G on the phone and relying on acquiring AT&T 2G didn't help, it still locked onto T-Mobile with the result that it was draining battery and rebooting frequently!), I ended up visiting the local Apple Store.
    Although the visit was not to resolve the iPhone problem, whilst there I happened to cycle the phone and due to the store having a local AT&T cell, the strength of the local signal meant that I finally re-acquired a AT&T 3G signal ... once locked on again the phone was fine for the next day.
    Nett outcome of this is that I would prefer to lay most of the blame for this debacle on the poor state of 3G support both by AT&T (and US carriers in general), maybe exacerbated in my case by two related events (the local DNC in Denver, which saturated local AT&T cells including 3G and a proliferation of v2.0.0 and v2.0.1 firmwares on iPhones in town, which dragged cell coverage into the weeds).
    It would be nice for future sanity if AT&T and T-Mobile could at least resolve the ability to acquire/release the iPhone gracefully, otherwise I'll be very sceptical of travelling back to the US with only my iPhone, as a self-employeed consultant I can't afford to be out of touch for three days again!

  • ICloud on iPhone suddenly keeps forgetting my password (and other sync issues)

    All of a sudden iCloud on my iPhone keeps forgetting my password. Sometimes I'll enter it, everything will seem to be fine and moments later it will prompt me to renter my password. This is extremely frustrating and has happened seemingly out of nowhere. I haven't been tinkering with setting or anything like that.
    I'll often be prompted to enter my iCloud password when doing things that have nothing to do with iCloud either.
    Another strange thing is that Notes, for example, still syncs correctly but all my reminders are gone. My iPhone calendar is blank now too. All of the apps are turned on in the iPhone settings. Everything on my computer is there, as well as on iCloud.com.
    I'm really baffled as to why this is happening all of a sudden. Could the problem be on Apple's end?
    This is happening at a really inconvenient time as I'm about to do a lot of traveling and will only have my iPhone with me during this time.
    I'd appreciate any possible solutions because I'm about to lose my mind.

    Sounds like you are not using icloud, but sync.me app. Why don't you check their support page and their FAQ.
    http://syncme.helpshift.com/a/sync-me-contact-sync/

  • Iphone 5 got wet, now apple logo keeps blinking and phone is unresponsive. When I try to restore it I get error code 21 then on another computer I get error code 2006.

    My iPhone 5 got wet and I dried it out for 3 days. Now when I charge it the apple logo keeps blinking. Phone is unresponsive, so I tried to restore it but got error code 21. Tried on another computer and got error code 2006. Any suggestions, or is it impossible to get it back?

    http://support.apple.com/kb/ts3694
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    If neither of those fix it, then it's toast. it will have to be replaced.

Maybe you are looking for

  • How to stop syncing automatically

    how do i stop my ipod syncing automatically to itunes? I've already gone into itunes preferences>devices and clicked stop syncing automatically but it still keeps syncing, help!!

  • Cannot export original RAW images in one step

    Sigh.... Here we go again. Apple tries dumbing it down for everyone and gets rid of some important stuff in the process. I used iPhoto as a ground level library for all my photography. And would easily import RAW images to my Lightroom collection. No

  • Regarding: How to Get the Tax Amount

    Hai Friends,                         I have the Input of  Amount + Tax Group.                        I  need the amount for every Tax from Tax group.                        How to get the Tax amount for differnt tax type. Please help me. Regards, K S

  • Cut the line coming from outside Verizon ONT

    My painter cut  the line (Fiber Optic cable) coming FROM outside to the Verizon ONT. How much will Verizon charge me for the repair ? If too much, I will consider early termination, but how much is the ETF then? Thanks

  • ASA enable mode with ACS

    Hi When I SSH to my ASA is there anyway to go straight to enable mode? We use RSA SecurID which means I have to wait for the token to change before I go into enable mode at the moment. ASA config: aaa authentication ssh console CISCO-ACS LOCAL aaa au