Apple TV Light constantly blinking

Hi My apple TV is giving a problem of Light constantly Blinking and my TV mnonitor is not responding to the TV being connected .
I have disconnected the device 2-3 time as indicated in the Set Up Guide but no help.
Please advice how to fix this ..

I would pull the plug for 30 sec and reconnect it
and if that did not help I would connect it by usb to the computer and use itunes to restore the firmware
if that did not help I would return it under warrenty

Similar Messages

  • HT5706 my apple tv light is blinking fast and telling me to hook it up to itunes

    apple tv light is blinking fast and telling me to hook it up to itunes. is there any other way to fix this?

    No.
    You could take it to an Apple store for them to do it.
    See:
    http://support.apple.com/kb/HT4367
    Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

  • WRTU54G-TM internet light constantly blinking

    I just got this modem used from eBay to set up a wireless system at my parent's house.  Whenever I plug in the ethernet cable from the cable modem (Brighthouse) directly to the router it whines about not being able to find an internet connection.  I've restored it to factory defaults, but no matter what I change the internet contstantly blinks quickly.  The "link" light on the cable modem constantly blinks as well, but it has no effect on the internet connection when skipping the router.
    Thoughts?  I'm at a total loss.
    Solved!
    Go to Solution.

    Solved my own problem by finding it on the forums.  I needed to change some config settings on the router that I'm no accustomed to doing.
    For anyone's info, it was found in the second post ofthe topic below
    http://forums.linksysbycisco.com/linksys/board/message?board.id=VoIP_Routers&thread.id=3905
    Message Edited by Teancum on 06-14-2009 07:11 AM

  • LED Notification Light Constantly Blinks

    My D2Global is falling apart. First the home key went on the fritz as well as part of the touchscreen. Now out of nowhere the notification light is constantly blinking when the phone is on lock. I powered off, powered on - still blinking. I turned off and pulled out the battery, turn it back on - still blinking.
    I don't have any new apps installed. No messages or notifications to check. I don't know what's going on.This has never happened before. It's only just year and 2 weeks old.

    Hello amourti85,
    I hate that you are experiencing these problems with your Motorola Droid 2 Global device.  I would like to assist.
    First, a few questions to help determine the root cause of the problems.  Did you notice the issues after downloading any specific applications?  If so, I suggest removing the applications and testing the Home key again.  Also, in regards to the unknown LED notification, check your call history / Recent calls to see if this will eliminate the LED blinking.
    Please let me know the results of your testing.
    Thanks,
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • Apple tv light keeps blinking and never connects

    My Apple TV keeps blinking as soon as it has power and never stops. It worked the last time I used it. I tried unplugging and reconnecting, etc. Finally in desparation I hooked my older apple tv to the same tv using the in place cords and it worked. Now how to make this newer one work. Help!

    You need to restore
    Restore your Apple TV (2nd and 3rd generation) - Apple Support

  • Orange light constantly blinking; computer no longer recognizes shuffle

    I just purchased an IPod Shuffle, connected it to my MAC, downloaded podcasts and was waiting for it to fully charge. It charged, but I left the Shuffle in the docking station. Now, it has been blinking orange for 24 hours and the device no longer appears in my I Tunes account or on the computer. All the instructions say not to disconnect when it is blinking. I have restarted the computer and did a cold boot. Nothing. Any suggestions. I would like to try the thing out.

    Just disconnect and reconnect. If that dosn't work, disconnect, reboot, reconnect.
    Or jusr disconnect, play music and then reconnect after a reboot...

  • HT1551 the led light keeps blinking after restarting it

    The apple tv light keeps blinking after restartin it with remote.

    You will need to restore it on a computer using iTunes.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support
    Scroll down to the section titled:If your Apple TV still does not respond or if you were unable to follow the above steps

  • My 1st gen apple tv displays a black screen,led status light is blinking orange constant. I have tried all the owners manuel tips but it appears to have locked up. Any advise?

    my apple tv 1st generation appears to have locked up. it constantly now displays only a black screen.No function reset etc from remote use.The led status is constantly blinking orange. I have tried all the manual tips etc but still blank. Any ideas anyone?
    Gary.

    Same/similar thing just happened to me....two days ago or so.  Ran fine for months since going from wifi (major problems) to ethernet now.
    I hadn't been on atv 1 for a few days and had it powered down.  Turned it on and it ran thru the startup video/sequence then did the ole sit on a black screen where you can hear the remote responses (say, if i hit left on the remote - the 'option not available' doink noise is made instead of the usual sound you'd get if you were moving to the left on the menu.....not sure if that description makes sense?
    The 'exit' or moving out of a menu 'noise' does sound, as does the enter/moving into a menu noise. 
    This has happened in the past, but more when i had it set up via wi fi.
    Thing is this time i left it sit on the black screen while reading the paper, and after about 5 minutes, the menu screen finally showed up.  Everything was really sluggish to start - but it was there.  But, then, i reset it to see if the sluggishness would go away, and back to the black screen after the startup video.....and then 5 minutes later, it came up.
    Not sure what is going on...but did have the blinking orange light for a while during the issue.
    Don't think its an age thing as it did this even when i first purchased it....
    Once into a video or music it runs fine (though i did notice that every once in a while with the music playing from my itunes, it would have a second of silence mid song like it paused for a second, and then would resume as if nothing happened.....
    Any ideas whats shaking with this?  Does this sound similar to your issue or am i in a different ball park.

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • My apple tv is not working, the front light its blinking

    my apple tv is not working the front light its blinking the only image on my tv is the apple picture

    You need to restore
    Restore your Apple TV (2nd and 3rd generation) - Apple Support

  • HT3180 My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

    My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

    Was the restore done via iTunes?
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
    If so then you may need to take it to Apple.

  • When I plug in apple tv the status light just blinks amber and nothing appears on the screen

    When I plug in my apple tv (first gen) the status light just blinks amber and nothing appears on the screen.  The status light never turns white and won't stops blinking amber.  I've tried to over ride this with the remote, resetting it and trying to revert it to the factory settings.  Is there a way to wake it up or is it a lost cause?

    Welcome to the Apple Community.
    The system looks like it's unable to start up, this could be software but more likely hardware, either way unless it will start up there is nothing a user can do to resolve this.

  • My Apple tv status light is blinking fast - how do I troubleshoot?

    my Apple TV gen 2 status light is blinking fast and I am not able to see anything from my Apple TV - how do I troubleshoot?  What I read on the Apple site is that my Apple TV has issues.  My Apple TV is hard wired to my Ethernet network.  It is connected to my TV using an HDMI cable.  It worked in the past but when I turned it on today it did not work.  I have not used it in several months and we had a bad thunderstorm here a couple weeks ago.

    I'm having the same problems as you. Any solutions? This is what i'm facing
    1. No video signal at all
    2. Plugged in power cable only, there is no light
    3. Plugged in micro usb, there is flashing light
    4. Restore via iTunes is sucessful but problem still persists

  • HT3180 My Apple TV is not responding. Screen in black and light indicator blinking fast. Cannot make it work. What should I do?

    My Apple TV is not responding. Screen in black and light indicator blinking fast. Cannot make it work. What should I do?

    Unplug it from power, wait 10-15 seconds and plug it back in.
    If it does not power up properly at that point, restore it via iTunes on the computer.

  • Apple tv (3) fast blinking light no picture

    Apple TV (3) fast blinking light, no connection, no picture.

    Restore.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

Maybe you are looking for

  • My phone is disabled, and I have forgotten my passcode? Need help reseting phone

    My phone is disabled and I have forgotten my passcode, need help unlocking my phone

  • FI-CA(contract account receivable)

    Hi , I know that contract account receivable is industry specific & has few reporting capabilties than AR. Can some body tell me do we have ability to post at line item level of an invoice in Contract account recievables. Regards Nik

  • Multivalue Parameter

    I have the query below that works fine, but breaks when I make my parameter multivalue.  I tried making the  syntax in(@category) and didn't work..  Any ideas? select *fromiv00101 i where i.uscatvls_2 =CASEWHENi.uscatvls_2 =''THEN'NA'ELSE@category EN

  • Why can't I set up and email aliases?

    I've been trying for several months to set up an email aliases and it nerver works. What gives?

  • Pre-mapping problem

    Hello , I would like to delete some records before inserting new records to the target table. So I use the Pre-mapping process for this situation. I wrote a simple "Delete record" procedure in the "Public transformation/Customs/Procedures. But when I