Apple tv light flashes constantly. no service
My apple TV indicator light flashes but provides no service. I have tried to reset by holding the menu and down arrow but no success, Any suggestions?
Apple TV (2nd and 3rd generation): Restoring your Apple ...
Similar Messages
-
Apple tv lights flashes quickly and there is no image
apple tv lights flashes quickly and there is no image
Pull the power and then plug it in again.
-
My iPad mini keeps turning itself off and then the apple logo keeps flashing constantly, i have charged it fully and restored it many times. what can i do?
If you have restored to factory settings and started as new, there is nothing more that you can do on your own. Make an appointment at an Apple Store and ask them for help. You might have a hardware problem and the Apple Store techs will be able to determine that.
-
After software update apple rv light flashing and not coming on
After software update my apple tv did not come on and light is flashing I tried in pluging and all what next for me
It was probably applying the update and rebooting, unless it had doin it for awhile?. You will need to grab a micro usb cable and restore in iTunes
http://support.apple.com/kb/HT4367 -
I'm about to call, but this is my last chance. What can I do?
Aha! A bit more searching and I found the answer that just fixed it for me.
Press Menu and the Back arrow at the same time until a broken chain icon appears on the top left of the screen.
Let them go....
Press Menu and Right arrow (forward arrow) until a "fixed" or "whole" chain appears.
This enabled my apple tv to once again respond and get off the "setting time and date" screen.
Hope it works for you. -
why does the indicat
or light flash constantly on my apple tvUse a micro-USB cable to connect Apple TV to your computer reset through iTunes. These are common cables that come with many digital devices, such as digital cameras. If you do not have one, they are inexpensive and can be purchased at Radio Shack, Best Buy, etc.
Have a nice day. -
HT202157 My apple TV is not working with light flashing after up date
My apple TV is not working with the light flashing after an up date, what can be done?
same here macbok air 2012 appletv 3 bugs the **** out of me
it just stops randomly after a "while" -
Apple TV connected to a 2005 50" plasma monitor with DVI input via belekin HDMI to DVI cable. Unit worked perfectly long enough to get it connected to the wireless network and begin the itunes registration process when there was a loss of signal message on the screen from the monitor and the Apple TV status light flashed rapidly and continuously. Reset and reboot yeilded flashing rapid status light and no output detected from the monitor. I contacted support online and was told to return the unit to the apple store. I returned home with another brand new apple tv and connected it in the same manner with exactly the same results. Is there something with the HDMI - DVI interface that is causing this? Are there known issues with the HDMI - DVI connection to Apple TV with older plasma monitors?
The Apple TV doesn't actually support DVI. Some have managed to get it to work others have had varying issues with it.
-
My Apple TV won't go on the menu page it stays on the time and date screen.every time I press the menu button the light flashes 3 times. Been trying to connect my new wifi but can't cause it won't get of that screen. I've treys turning it off and one still no joy. Gutted. Heip
My Apple TV won't go on the menu page it stays on the time and date screen.every time I press the menu button the light flashes 3 times. Been trying to connect my new wifi but can't cause it won't get of that screen. I've treys turning it off and one still no joy. Gutted. Heip
-
HT3180 my apple tv light just keeps on flashing, and i can't restart it, any idea's
my apple tv light just keeps on flashing, and i can't restart it, any idea's
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
What is wrong with apple tv when the blue light flashes quickly
I am having trouble with my apple tv device. The blue light flashes continuously and will not reset at all.
Welcome to the Apple Community.
You might try restarting the Apple TV by removing ALL the cables for 30 seconds. -
I updated my Apple Tv and now the light flashes, but wont turn on
I updated my Apple Tv and now the light flashes, but wont turn on,I have unplugged and still will not work
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
Status light flashes. Apple on TV.
Been using Apple TV more frequently lately. All of a sudden status light flashing continuously and an apple on the screen. I have unplugged everything for an hour and still no luck. held down menu button and other buttons...no luck. Please help so we can watch Apple TV again! Do I need to "reboot"? If so, how!
Hello Kardsy,
The links below detail how to restore both the 1st generation Apple TV and the 2nd and 3rd generation Apple TVs.
Apple TV (1st generation): How to perform a factory restore
http://support.apple.com/kb/HT3199
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Cheers,
Allen -
Apple TV light is flashing and displaying to connect to laptop to restore but I don't not own a laptop. can I restore with the remote ?
Welcome to the Apple Community.
I assume when you say you do not own a laptop, that you do not own a computer of any kind.
If you don't have a friend that has a computer that runs iTunes, then you can always take it into the nearest Apple Store and they will restore it for you. -
Plugged in my Apple tv to tv and light flashing non stop.Tv screen showing iTunes logo and USB cable.Not responding to anything
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.
Maybe you are looking for
-
How can I add a color background to pages in Apeture?
How can I add a background color to pages in Apeture book design?
-
TS3591 Only part of a song downloaded
I purchased "My Humps" which should be over 5 minutes and the song cut off after 1 minute and 26 seconds, how do I get the rest of the song that I paid for?
-
Application Install/De-install Problem
I downloaded and installed something called DigiTunnel to help with a VPN connection. Ultimately I solved my problem without DigiTunnel and tried to de-install it. I thought I had deinstalled it successfully using AppZapper but I keep getting DigiTun
-
How to SELECT the last autonumber??
In Access, i have an autonumber column...How do i get the last record (last autonumber) out? Thanks
-
Hey I just paid iPhone 4s form online and I just found the Icloud lock What should I do They don't want to give my my money back Can you please help me