Apple TV, menu button on remote does not work???

I updated the firmware usiing iTunes, but the problem is still there.

Then it might well be broken.

Similar Messages

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

4.1EA. Open Body button in toolbar does not work

Hi, All!
4.1EA. Open Body button in toolbar does not work. In object tree click on some Package. Next - in toolbar click on OpenBody button. Body is not opened.

Ow, that's a bad one, good catch.
As a workaround the 'gutter blue arrow' hyperlinks DO work.
Once I DO manage to get the body open, the button works for me without fail, even after an application restart. And I'm able to open other package bodies. So I can reproduce this bug once, but only once.
Do you see the same?

The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen

the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.

Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV

Second button on menu for slide show does not work.

Anyone else having problems with this? Despite three separate attempts using different photos, different Macs and different themes... it is always the second button (to access the second folder) in the slide show that does not work. It fails to access the slides in the folder.
Our conclusion finally was that this is a bug, so we used only text buttons and put the second button over to the side of the main menu with just a period in it, and one image in the folder (it will not allow a folder without any images) and then we can skip from the first button to the third (seen on the screen as the second button) and bypass the problem.
Has anyone come up with an explanation or a better solution?

Anyone else having problems with this? Despite three separate attempts using different photos, different Macs and different themes... it is always the second button (to access the second folder) in the slide show that does not work. It fails to access the slides in the folder.
Our conclusion finally was that this is a bug, so we used only text buttons and put the second button over to the side of the main menu with just a period in it, and one image in the folder (it will not allow a folder without any images) and then we can skip from the first button to the third (seen on the screen as the second button) and bypass the problem.
Has anyone come up with an explanation or a better solution?

My up button for volume does not work and need to turn incoming call volume up. is there an app to do this

my up volume button does not work and i need to turn the incall volume up. is there an app that does this?

Hey skeith75,
Thanks for the question. Based on the information you have provided, your iPhone may need to be serviced to fix that button. However, if in the meantime you would like a workaround for turning the volume up on a phone call, you can use Assistive Touch:
iOS: Using AssistiveTouch
http://support.apple.com/kb/HT5587
If you do wish to service your iPhone, the following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
Apple - Support - Service Answer Center
http://www.apple.com/support/iphone/service/faq/
Thanks,
Matt M.

Spinning beach ball in menu bar, sys pref does not work etc

Since last 2 days I have the following problem with Macbook:
1. When i hover the cursor over the menu bar, the beach ball appears. this is for the Mac menu items such as Airport, Spotlight, Fast switching, time & date and also for iStatmenus. However, Little Snitch menu bar indicator is not affected
2. Sysprefs also does not work. It opens up and immediately the beach ball appears and I can't click on any of the sys preferences
3. If i try to watch a video, then the video will not display, though the progress indicator will happily be progressing away (QT, VLC etc)
4. When i run in Safe mode, then everything seems to work ok (at least the menu bar, though the video part still doesn't work)
5. And also in Normal mode, Safari/Netscape Navigator/Camino et al hang & the beach ball appears, but in safe mode they work ok though very sluggish.
6. Though i can't be certain, I think all these problems began after iTunes crashed on me while running a podcast (?)
I have tried everything; repair prefs and repair disk, have run Tinkertool system2 to see if that would help but to no avail. I even downloaded and installed OS X 10.6.7 Combo update-didn't do any good.

I have been trying to deal with the same problem for the last week.
My machine is a MBP 17" 4 GB 2.6GHz, 250 GB alluminum.
1) I've immigrated my whole user apps and doc files to an IMAC 20" 2GB 2.66GHz 350 GB, and the system works just fine on the IMAC (I am using my system that used to be in the MBP right now).
2) I've over written everything on the HD with zeros and have done a clean install of SNOW LEOPARD on my MBP, but as the system got loaded, already before any working files or app files have been reinstalled, the spinning beach ball appears on the upper RIGHT portion of the menu bar and makes the system inoperable.
3) Done system update and made it into a 10.6.8 but the problem persists.
I've basically done what Ravindra had tried.
Please HELP.

html:link action="" input type="button"... does not work under IE browser

Greeting,
I have the following codes in struts1.3.5. It works fine under Firefox, but it does not work at all under Internet Explore (IT) at all. Any clues why under IE it does not work?
<html:link action="/private/search">
<input
type="button"
value="Search"
class="search-button">
</html:link>
Thanks a lot!

This would probably generate a HTML in which there will be a button inside anchor tag.
This is not a standard HTML feature and no wonder this is not supported by IE. I copied the generated html codes into test.html to try on IE, the button does not work at all.
Firefox is probably lenient here. True. test.html works in Firefox.
You might want to just have a link or do a form submission on button click.The action designed does not need an actionForm. I updated my code to :<html:button onclick="location.href='processSearch'"
property ="Search"
value ="Search">
</html:button>
And now both Firefox & IE works fine.
Thanks a lot!

The add work button for behance does not work. how to fix this?

I cannot publish to Behance the add work button does not work. I also cannot upload work to Adobe Voice Either. Why is this happening? I see my comrades uploading work.

Sorry to hear that! To resolve this quickly, submit a ticket here so that we can give you one-on-one support: https://behancenetwork.zendesk.com/anonymous_requests/new
Off the bat, if you're having this issue on several products, it might be an issue with your computer or browser settings. We'll help in the ticket!

Top/Left Back Button in Settings does not work

When opening the Settings, it will present "navigate up" enabled. That is the wedge on the top/left next to the Firefox Icon in the Action Bar. ("actionBar.setDisplayHomeAsUpEnabled(true)")
However, it does not work. Please implement the back-behavior as shown here:
http://developer.android.com/guide/topics/ui/actionbar.html#Home

Hi,
Thanks for reporting this, I have filed https://bugzilla.mozilla.org/show_bug.cgi?id=756663 for the issue and alerted UX and eng about the problem.
Regards,
Michelle

What to do when remote does not work

What do u do when the appl tv screen loads but the remote doesn't work for it . I changed the batteries and turned off itv now what??

Welcome to the Apple Community.
You may have inadvertently paired another remote to the Apple TV.
Hold the remote close to and pointing at the Apple TV, hold down the menu and rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

LaserJet Pro MFP M125nw - Scan to app All-in-One Remote does not work

Hi gurus,
Basically I have pruchased that super-printer and I am now trying to achieve scan to my mobile devices.
I have one iPad 2 on iOS 7, on 2 Android devices (smaller tablet and phone) both running Kitkat 4.4.2
I am trying to submit a scan from all these devices and retrieve the output within my mobile devices, actually this is fairly described here and concerns accurately my printer model : http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02486319&tmp_task=useCategory&cc=us&destPage=pr...
Unfortunately, What happens :
- From my iPad, the AiO app states that my printer is not compatible with the application !!
- From my 2 Android devices, the All-in-One Remote app will work fine, except the scan feature as nothing happens (well, when tapping either 'Preview' or 'Scan' button in the Scan section, I see a 'Cancel' button during 0,1 second and I am back to that scan section)
Any one could help please ???
This question was solved.
View Solution.

Hello,
Can no one help ?
Is the product description misleading ? Is the AiO app not really reasy to support this printer ?

Why would menu button's active state not work? Regardless if I import PSD button or use menu widget from the widget library.

I am using Adobe Muse CC (up-to-date) and tried to troubleshoot the following: Menu button's active state is not working, both on preview and after publishing. I tried many ways to place menu-designed buttons myself using photoshop and used widgets library (buttons, compositions, menus,etc.). Lastly, in regards to buttons, one of my menu buttons appear clear and crisp (psd button) and all others are blurry (though designed,saved and imported the same way);what could be the problem? Can anyone help?Thanks.

That line is for pop up message?You would typically use a tool tip for that.
The "Accessibility" features are different and I believe you need additional software to take advantage of them:
http://java.sun.com/j2se/1.5.0/docs/guide/access/index.html

Apple TV, menu button on remote does not work???

Similar Messages

Maybe you are looking for