Apple tv menu change when viewingnnetflix?

The atv netflix menu seems to have changed since yesterday. Recently viewed items no longer show.

There have been a few reports of Netflix disappearing from the ATV menu altogether, but this is the first one I've seen about the menu changing, although it's possible some of the menu data could be coming from Netflix, and they make changes from time to time.
If you think the problem is with your ATV you could try the restore procedure:
http://support.apple.com/kb/HT4367

Similar Messages

  • HT3199 I have an apple TV 1st generation - it froze downloading a trailer and had to be unplugged.  Since then I cannot access the apple tv menu.  When I run diagnostics it says it is operating properly but will not factory restore.  What can I try?

    have an apple TV 1st generation - it froze downloading a trailer and had to be unplugged.  Since then I cannot access the apple tv menu.  When I run diagnostics it says it is operating properly but will not factory restore.  What can I try?

    Apologies, I was looking at the wrong schematic for the Apple TV 1. There isn't a button. So lets try this instead...
    Remove the power cord and wait 20 seconds.
    Plug it back in and let it boot (Give it 10 minutes, it's being tempremental)
    Try and navigate to the the advanced menu and do a factory restore
    If that doesn't work then if you are using the white remote hold down the menu button for six seconds and release this should bring up a hidden menu which will allow you to access the advanced configuration settings.
    Again, if this fails there isn't much to do than tap it with a hammer to see if that fixes it (hard to believe how many times that actually works. (No responsibility taken if it breaks!, but at least you'd have a good reason to buy Apple TV 3)

  • CS5 "save as" format menu changed when creating new document

    Hi,
    When creating a new document in photoshop CS5 i cannot save as a jpeg or png or the other large list of file types i used to have in the save as format menu,
    below is what i used to be able to save as but can only do this when actually opening a jpeg file and not when creating a new document
    this is the options i have now
    i haven't been using photoshop that long and am no genius with pc's so i'm a little lost here, does anyone know why this has happened and if there is a solution to this, your help will be greatly appreciated. my spec are windows 7 64bit, core i7, nvidia 260gtx.

    It looks as if you are creating documents in a format incompatible with certain file types.
    For example, check in the New dialog that it is set for RGB Color – 8-bit.

  • DVD Menu changes when you hit menu on DVD player

    I understand how to use the connections tab, force a button or end up/menu, etc to do what I want it.
    what I'm having a problem with, is when a DVD is sitting on a menu, if you hit "menu" on the remote, it jumps to a random track (it doesn't do this in the simulator). is there a way or setting in connections that if you hit "menu" when it's just sitting on an idle menu, it won't jump to another track (really don't want it to do anything)

    Mark Nunnally wrote:
    (really don't want it to do anything)
    In the inspector for the Menu you can disable user operations (be careful though to leave navigation and selection of buttons in )

  • Photoshop menu changes when video is applied.

    This is encore CS6
    I have been trying to figure this out for a while and can't seem to. I have a photoshop menu consisting of a white background with text and a couple images. I created a video to apply to the menu.
    On its own, the menu is fine, but when I link it to the video, the menu gets thin black bars on the edges and the video seems to show through a sliver at the bottom. This totally boggles me because I noticed the video peaking through behind the menu, so I cropped the video in PP, re-exported it and it re-appears in Encore as no-cropped and showing thru at the bottom again. Anyways, the main issue probably has something to do with the Photoshop menu not being as big as the video file in dimension or having a different pixel aspect ratio. Though I played around with the PARs in Photoshop to no avail.
    I'd appreciate the help.
    Thanks,
    Tim

    Clark583 wrote:
    Stan,
    That information may very well help me. I don't believe I ever used a layer other than the one called "background". But thats good to know.
    I created a solution to the black edges and sliver of video at the bottom. I created a menu from within Encore (the "Rose Menu HD" menu), clicked on the "edit menu in photoshop" and simply modified that rose menu in photoshop to look like it needed to (like my other menus). This way I was gauranteed that the basics of the menu would be right when it came to size and par.
    The jittering issue is still there. But I did narrow it down to being a problem with the video background. I know this because I created two of the same menus on a test DVD, one with a video background (which ended up jittering) and one without a video background. The one without a video did not jitter at all.
    Thanks.
    Neil,
    what do I do after saving a TIFF image from the video?
    Open Photoshop & from the "File/New" dialogue create a DVD menu (there is a section for this called - from memory - "film & TV" although this may vary depending on version) in the style you want (NTSC Widescreen - not Square Pixel version) and this gets you a base with guides.
    NOw get the paint bucket out & make the background black.
    Open your TIFF file, and drag the image from the "layers" tab into the DVD menu template.
    If it is too large, move it until you can see a corner & poress CTRL/T and turn the imported still into a smart object.
    Hold down the SHIFT key & drag the top left corner down to the bottom right, and when you run out of space stop dragging & slide the image back up to the top left again.
    Repeat until it fits onto your background & then select the usual pointer tool & select "apply transformation".
    That is now your background sorted.
    When you say "jitter", I suspect you mean flicker, as Jitter is caused by bad clocking & is a very different thing.
    Check field orders - are you using HD to DVD? If so be very careful with field order issues. If the video is Progressive you should be okay but if it is compressed MPEG-2 Transport Streams or similar it will almost certainly be Upper Field First whereas the transcode for DVD will probably be Lower Field First.

  • Apple id wont change when buying apps

    My husband used my ipad to look up some apps, he didnt realise he changed my ID to his and now I cant change it back to mine, I have gone to setting - store route but this HAS my ID in it, any ideas???

    Yes. Sign out of his account in that setting and then sign in with your own ID. Did you try that?

  • Why is my apple ID keeps changing each time I wanna install an app?

    Apple ID keeps changing when I try to intsall an app?

    You should be able to change the id that that is logged in on the iPad by tapping the id that is on the right-hand side of Settings > Store and then logging in with your own. Are any of the apps that are on the iPad bought/downloaded by the id that is showing ? If so then they can only have any udpdates to them downloaded via that id - apps are tied to the id that bought/downloaded them, not to the device that they are on

  • HT3180 Uploaded new software update and all I have is a little black box with an incessant flashing white light. I have pushed menu + downarrow on the remote, unplugged for 10 seconds and stiill no change when I plug it in again ! !

    Uploaded new software update and all I have is a little black box with an incessant flashing white light. I have pushed menu + downarrow on the remote, unplugged for 10 seconds and stiill no change when I plug it in again ! !

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • My Apple ID was changed.  Yet when I try to update apps I am asked to enter the password for the old IG which will not work and no matter what I do. When I attempt to update apps it still askes for the wrong ID data.

    My Apple ID was changed.  It works fine on my IPad mini, my MAc and in Itunes Store,  Yet when I try to update apps on my IPAD 1 I am asked to enter a password for the old ID user name which appears in the pop up window. When It still askes for the wrong ID data. I have uodated it in settings, and I have logged ontht the account to verify that it still works properly and it does.  I reboot the IPAD and then attempt to update apps again but it still asked for the Old ID password and still shows the old ID username.  The dame thing refuses to recognize my new Apple ID data.  This is making my older IPAD unuseable.

    You cannot change your Apple ID. You can get a new one if you want, but all of your Apps and media are linked to yoru old Apple ID. And no, Apple won't transfer your old ID purchases to yoru new ID.

  • How can I change my apple ID email address when I can't access old email (It's an old work address I can't access anymore)

    How can I change my apple ID email address when I can't access old email (It's an old work address I can't access anymore)? Whenever I try it always wants to send things to my email address to confirm. I have a new apple ID and a new email address, I want to use this now for my iphone and my macbook air but I can't and I'v

    Thanks Lawrence. I've spent over 3 hours on the phone/chatting to online support and none of it seemed to help as it all revolved around resetting emails etc but can't do any of it without my access to my old email. Now my phone won't take cloud because they advised to set up new apple ID and use that, but can't sign out of old one completely. Also doesn't help because my phone and laptop are set up on the old one. Thanks for the help.

  • IMac (2008) OS10.6.8 - Main menu freezes when running more than one application at a time.  Apple and 3rd party applications - all freeze the main menu.  Safe mode seems to work OK. Tried repairing permissions - didn't work.

    For the past 60 days I've experienced Main Menu freeze when running more than one application at a time.  iPhoto, Preview, Text Edit, Epson Scan, Firefox and Thunderbird are the apps I use almost daily.  No matter what I do, when more than one is running they will freeze the Main Menu (top of the screen).  I've tried booting is Safe Mode and I don't seem to have a problem.  I've tried several suggestions from repairing permission (DiskUtility) to eliminating specifis login items.  Nothing works. I've posted this issue on the Apple forum several times and no one else has experienced this problem.  I hesitate to take my iMac to the Apple Store or a private Apple repair service until I've exhausted all of my options.  Do I have any more options?    

    Question:  Everytime an app crashes I have the option to report it to Apple - which I usually do.  But I've NEVER reported a Main Menu freeze because it never asks me to
    There's really no need to submit to Apple, it's just a round file cabinet on the other end, especially with 10.6 or earlier.
    This sure sounds like a resource problem...
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab, are there a lot of Pageouts?

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I changed by apple id and password on apple web site but when I try to sign in on my touch it asks me to enter the password for my old apple id, how do i get icloud to recongnize my new id?

    I changed my AppleID and password on the Apple web site but when I try to sign in on my touch it asks me to enter the password for my old Apple ID, how do i get ICloud to recognize my new ID?

    Hi appledapple1964,
    After changing your Apple ID information, you may need to manually sign out and sign back in on your devices so that they may recognize the update. You may find the following article helpful:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Regards,
    - Brenden

  • I was using open office spreadsheet today and inadvertantly clicked on a menu item that caused the Apple toolbar to disappear when I am in open office.  How do I get it back at the top of my screen?  I am currently using OS 10 Lion.

    I was using open office spreadsheet today and inadvertantly clicked on a menu item that caused the Apple toolbar to disappear when I am in open office.  How do I get it back at the top of my screen?  I am currently using OS 10 Lion.

    Click on the Menu bar  and go to View .  Or, hover over where the Menu bar shiuld be and click on it when it appears.  Try quitting and relaunching Finder.

  • I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.

    I once created an account and changed meanwhile my Apple ID. Now, when trying to log in to iCloud, I get the message: "You are already logged in". I cannot get access to the account in the way, that, for example, the options appear on the right hand side.
    What can I do?

    Thank you, pvonk, but:
    To be more precise: I am talking about the logging-in within the System Preferences on my iMac.
    When trying to log in with the old ID, I get no access, i.e. it says "Try again"...-Trying the same with the new one gives me the result I mentioned in my first question...
    Now I found out how to do it: I had to erase all accounts-then I could sign in with my Apple-ID. Thanks again.

Maybe you are looking for