Apple tv network connection not working after 4.2.2 upgrade

I think the 4.2.2 upgrade has broken something. My Apple tv wifi connection has been working fine. Stopped working after the upgrade.
Laptop and mac mini working fine through the wap.
My wap is a time capsule
I've got good signal strength and a valid ip address. Still no connectivity to the internet or to my itunes library from the apple tv
-Tim

Unplug and restart.
If no joy reset settings in Settings menus.
If still no joy and you have a micro USB cable do a proper reset via iTunes.
AC

Similar Messages

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

Apple av adapter does not work after updating ios 5,01

apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.

Thank you for your interest. Last night i tried again. It worked. there is still problem, so i could find out it that monitor is going to power saving mode then voice goes out and no view on monitor. I changed the power saving settings. And worked well. Thnx again.

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

IMessage not working after iOS 5.1 upgrade! Feedback pls

iMessage not working after iOS 5.1 upgrade, anybody experiencing this as well? Feedback please......

You shouldn't have to hard restart and it shouldn't have anything to do with your router. If anyone else runs into this problem try resetting the network settings on your phone. All the steps to do this can be found here http://tekshot5.com/ios-5-1-imessage-fix/
Edit: Some of us don't have the option of resetting our DNS servers. I run my own for example for caching purposes.

Wrt610n wireless network does not work after firmeware upgrade

Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
Stefan

Update -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

7 u j m keys not working after 10.8.1 upgrade, late 2008 aluminum Macbook

That's all, these keys do not work after update/upgrade today. They were working fine right before i did the update and are not working now. If I hit the M ket a few times i do get some garbage. Help?

Thanks, but still the same. It boot normally only if there isn't any usb device attach to the computer. I'm using usb mouse instead of bluetooth mouse and it happens not to boot normally like usual.
The technician said it would be okay if any usb devices attach to the computer during the boot apparently it won't boot normally.
Any alternative sir?

A1: Home button not working after Ideapad A1 ICS upgrade

So yesterday I finally tried the ICS upgrade for my Ideapad A1. It worked OK besides all data on internal memory and SD being deleted so I had to reinstall all my apps or restore from Titanium backup.
In any case the only real problem is that the home button is not working after the upgrade. Does anybody else have this problem and maybe even a solution?
Thanks!

Hi, Im using A1 16G and tried to upgrade to ICS for couple of days i read too many articles in different forums....
Can you put any instruction on how you made it?
Thanks

Airplay from Windows7 PC to Apple-TV 2 does not work after iTunes Upgrade

Hi,
after the latest iTunes Upgrade 10.1.2.17, AirPlay discontinued to work!
My Apple-TV shows up as speakers, but after choosing the A-TV I get a massage that it can not connect to remote speakers. Unknown error (-15000).
I have rebooted the A-TV and PC multiple times. The AirPlay function works fine if done with iPhone 4!
Pleas help! Thanks in advance!

I forgot to say... Airparrot shows up in your system tray after you install. As long as you are on the same network as your Apple TV, just right click the Airparrot icon and select Apple TV as your Airplay device. Voila!
http://airparrot.com
Then hook up your wireless keyboard and mouse and plop on the couch for some supersized web browsing.

Apple tv ethernet connection not working

Connected my new Apple TV to the ethernet cable and it doesn´t show the network available to connect to internet.
Am I missing some step ?
Thanks

ISSUE
After the latest software update, my Apple TV2 has stopped recognizing any form of network connectivity and appears to believe that it's connected to the network via an ethernet connection, whether or not there is one actually plugged into the back of the device.
BACKGROUND
I echo many of the previous posts... I've had Apple TV2 for over a year with no difficulties. Ethernet and wireless connections have always worked. For the last 6 months the Apple TV2 has been hardwired via my ethernet connection with stellar results. However, after the recent software upgrade, I've lost all network connectivity. Apple TV2 will no longer recognize the same ethernet connection it's always been attached to. This is the same connection that has always allowed me to watch iTune movies, Netflix and download/install all previous software updates. Worse yet, when the ethernet connection is unplugged from the back of the device, Apple TV2 believes it is still connected to the ethernet cord, as if it's stuck, and WiFi functionality does not kick in.
TROUBLESHOOTING
This specific issue has nothing to do with the actual "network" so I am kindly asking people to stop recommending that we check our network/router settings and ethernet cords. Apple TV2 is designed to automatically activate its wireless function when an ethernet connection is not recognized. It's should be pretty obvious to anyone who is tech savvy that there is something wrong with the device and not the network, with respect to the specific aforementioned symptoms.
STEPS
Nothing has changed on the network and I've tested the ethernet connection with both MacBook Pros... with success.
Restarted device multiple times
Attempted to restore device but no network connectivity makes this impossible
Connected device to iMac via micro USB cord and restored from scratch
Made the assumption the wireless antenna could not recognize network due to location, surroundings (i.e. tv stand, Directv receiver, SP3), etc. Moved Apple TV2 to another location and connected to different TV. Wireless functionality still does not activate when ethernet cable not plugged in.
All other common sense troubleshooting steps have been taken per Apple's troubleshooting recommendations and other blog site recommendations
I'm sure the latest software update worked for the majority of all Apple TV2 owners. Anything could have gone arwy during the update that could have caused this specific issue to present itself. Either way, there are enough folks with the same complaint to warrant a deeper dive of the issue. My next step will be to jailbreak the device since I have nothing to lose at this stage... it's a simple paperweight until I find a solution.

Excite PRO 3G connection not work after Android v4.3 update

Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you

>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings)

Wireless connection not working after installed newest Lenovo ThinkVantage System Update programs

Hi, everyone!
I've installed some newest programs through Lenovo ThinkVantage System Update and just after that my wireless connection has stopped working. Here are the installed programs:
ThinkPad UltraNav Driver for Windows 32-bit version 15.0.24.0;
ThinkPad Power Management Driver version 1.60;
ThinkPad Modem Adapter version 7.80.8.0;
ThinkPad Hotkey Features Integration Package Setup version 3.11.0001;
Inter Wireless WiFi Link for Window XP version 13.02.0000;
ThinkVantage Access Connections for Windows XP version 5.62;
ThinkPad Power Manager version 1.88;
Lenovo ThinkVantage Toolbox (32-bit) version 6.0.5514.61.
I've got a Lenovo T61 with Windows XP SP3.
Also in Device Manager, there are now the two "Other devices" bellow with a yellow question point and a yellow exclamation point by side:
Bluetooth Hands-free Audio;
Bluetooth LAN Access Server Driver.
Does anyone have any idea what can be done to have these issues solved?
P.S.: when I click Fn+F5 it shows only the Bluetooth Radio.

Hello and welcome,
I've seen something like this on XP machines after updates a couple of times now - my T61, a friend's T400, and his daughter's T61. I guess that makes 3
_Maybe_ your situation is the same.
The fix in all 3 cases was to go to device manager and uninstall the wifi driver. Then scan for hardware changes and let it reinstall the driver. Something about how Access Connections or some other networking mangement thingy was hooking the drivers I guess.
On both of the friend's machines, the wired networking was also b0rked. Same fix there.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Mac Mini Wake for Network Access Not working after upgrade

After upgrading to the latest OS (10.8) the WOL fuction is not work. This used to work before the release. i could see the Mac mini on my mac book pro even when it was asleep. Once I click on it under the shared resources area I could see the Mac wake up. Now as soon as it goes to sleep it drops from my mac book pro. I am connected via WIFI but also tried via LAN. Same result. Any ideas? Seems to be a bug as I google this issue it appears to be impacting many people.

Same issue here after updating my iMac to OS X 10.8. I can't use Logmein, wireless syncing to iTunes from my iOS devices, or my Logitech Server software for my Logitech Radio. Once the computer goes to sleep, it is invisible to the rest of the network. This all worked fine on 10.4-10.7. I have double-checked that Wake on Network Activity is turned on. I have disabled all networking interfaces except Ethernet. Nothing seems to help.

Network connection stops working after 3 days

My Mini is never switched off, but is often put to sleep. After near-faultless operation since new, it has recently (possibly coinciding with the upgrade to 10.4.10) started having a recurring networking issue.
After a small number of days, the network connection becomes unusable - neither Safari or Mail will work. Strangely other tools appear OK (e.g. traceroute www.whereiwork.com worked fine). Rebooting always temporarily fixes the issue.
The time interval may vary, but on this most recent occassion I checked the uptime before rebooting, and it was just 3 days.
Next time it occurs, what can I do to identify the cause of the problem?

Well, just under 4 days since the last reboot and it's done the same again...
It seems it's not entirely failed, but certainly doesn't work well enough to be useful.
e.g. if I start a ChickenOfTheVNC session to another machine on the LAN it appears to make a successful connection and creates a window of the right size but never fills it in. The server machine agrees that a connection has been made, but disconnects the client after a long-ish timeout.
Some other semi-random things I've tried:
/etc/resolv.conf has an entry in it referring to my router.
ifconfig en0 down
ifconfig en0 up
...makes no difference
Unplugging, then replugging the Cat5 makes no difference.
Rebooting the router makes no difference.
Not knowing enough about the inner workings of OS X, I'm going to have to resort to a machine reboot again. If anybody has any bright ideas for debugging this, it's due to go again sometime on Saturday afternoon.
(The procedure for "rolling back to .9" seems more disruptive than the problem itself, for now at least...)

How come my Wi-Fi network will not work after I updated my iMac to OS X Mavericks?

I just updated the OS on my iMac (late 2009) to OS X Mavericks and now the Wi-Fi network that I had previously set up and used for internet access for my iPad mini and my Nintendo Wii U will not work. It worked fine before with Snow Leopard.

Begin by restarting the computer, if that does not help then do 2-3 SMC and PRAM resets (instructions below) and if those do not work reset your modem and router (I don't care if other devices work) and ensure the Router is has the most up-to-date firmware installed.
Intel iMac SMC and PRAM resets

Apple tv network connection not working after 4.2.2 upgrade

Similar Messages

Maybe you are looking for