Apple TV non responsive

We have had out appleTV for less than a year. In the last week the menus have become non responsive. Nothing moves it freezes then restarts and asks me, what language, what resolution, then either to restart, run a diag, or factory restore. I tried to restart, the worked for a couple of days, then it reset itself again, I ran the diag, it says that there is a problem with ethernet networking. Now I am doing a factory restore. Does anyone know what causes this problem?

Is there an ethernet cable plugged in or is it reporting an error even though you're not using it?
Does this happen randomly or when watching specific things, some video encoded with incompatible rsettings can apparently cause reboots.
To be honest if it's under a year old and still under warranty probably best just to take it to an Apple Store for a replacement. Apple has a media event on 1st September, might be worth seeing what they release before taking it back assuming you don't solve this in another way.

Similar Messages

  • Apple USB Keyboard non-responsive in Windows XP Partition

    Hi, as a few others are having problems with their keyboard, i have the same problem. I have tried various keyboards and still no luck. My keyboard works just fine in leopard, but when i switch over to XP, it doesn't work during the login screen. It is plugged straight from the USB port. I've tried going into safe mode, tried booting to my last good configuration, plugging and replugging, still no luck. Maybe a driver issue? What can i do to fix this problem? No one really seems to know a for sure answer.
    I have an imac 24" 2gb ram running leopard
    2.4 GHz Intel Core 2 Duo processor
    bootcamp to run windows xp

    I was able to resolve my issue through a couple of steps. Since i wasn't able to log in my computer while my keyboard was non-responsive, i logged back into my leopard and used Parallels desktop to long onto my windows partition. Next I went to my device manager and uninstalled the keyboard driver, followed by a restart. It's working fine, now

  • When playing games on my iPod touch.  Some are stutters and non responsive

    Trying to play games on my iPod touch and they are slow, stuttery and non responsive. iPod software is up to date

    Do the games require an internet connection? If so then maybe slow connection.
    otherwise:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Can the Genius Bar cable to my iPhone 5S to enter my passcode on a broken, non-responsive touch screen?  I need to back up the 5S before replacing it under AppleCare

    Can the Genius Bar cable my 5S to their computer or separate keyboard to enter my passcode on a broken, non-responsive touchscreen?  I need to get past the passcode to either transfer my data and pics to a new 5S or my PC computer (that the 5S has never been synced with.

    Are you serious... only bluetooth keyboards? Even if the keyboard has the lightning connector? This supposedly works on the iPhone: http://store.griffintechnology.com/wired-keyboard-for-ios-devices
    as well as this: http://www.att.com/accessories/specialty-items/logitech-apple-30-pin-wired-keybo ard.html

  • Was updating my touch this morning when an error message occured, itunes became non responsive and was shut down.  My touch is locked in the itunes update mode and my computer no longer recognizes the touch.  How do I correct?

    During update, error occured and Itunes became non-responsive and shut down.  My Itouch is now locked in the itunes update screen and is no longer identified by my computer.  How do I fix this problem?

    Try this:
    DFU Mode / Unable to Update or Restore
    http://support.apple.com/kb/HT1808
    DFU Mode
    Open iTunes and Connect the iPhone to your Mac
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
    After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPhone in Recovery Mode...
    The Phone Screen will remain Black... Now Restore.
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • My Ipad 2 no longer displays anything.It may come on for a few seconds,but then half of the screen goes completely black, and the system becomes non responsive to all bottons. At other times all four sides of the display becomes black, about 1/4 inch.

    Can anyone help me on this one? I got my IPAD 2 in June 2011. It never gave problems until a few days ago. It began to "hang", becoming non-responsive to all buttons. Then just yesterday morning, it went totally black. The display no longer displays. The Battery was charged 96%. I tried the power adapter, but had the same result. I tried the resetting, holding the two buttons for 10 seconds or more but no result. I have already restored it to the factory setting,(via my PC) and put back my apps etc. But after all this I still cannot see anything on the screen.
    I know it is still working, because from time to timer I hear the message alerts, and other sounds.
    Waht is the likely solution?

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • HT1414 IPad less than 1 year old was working perfectly & was fully charged. Went back 2 hours later & it was blank screen & will not respond no matter what I do. Have fully charged but still black screen & non-responsive with nothing happening when I try

    IPad was working fine & fully charged. Screen is now black & non-responsive. Is there something I can try or should I take to service center?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Cusrsor Freezes up and is non responsive- Solution?

    I am using a mouse with my newly purchase C2D MBP and still from time to time, getting the non responsive frozen cursor. As far as I can tell, there appears to be no rhyme or reason to this. This is my second computer. First there was an odd low pitch beeping sound coming from the left side near speaker as well as the non responsive frozen cursor. Exchanged the computer for exact same model I have now. No longer have the beep but noticing lately there is still the non responsive frozen cursor problem I had with the original one. The Apple solution as far as disabling track pad really has no relavelance to the problem I am experiencing with my computer as well as I see from others in this discussion. I'm not sure what to do at this point. Any suggestions?
    Macbook Pro C2D MBP   Mac OS X (10.4.8)  

    1. Try unplugging the mouse and plugging it back it when it freezes.
    2. Note the exact time if freezes and check your system logs in your Console application for clues.
    3. Boot from your system install DVD, play around with the mouse awhile and see if you can get it to freeze. This will help determine if it's software or hardware related.
    4. You could have some bad sectors on your hard drive. Back it up and do a "Zero all data" reformat. Then clone everything back.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    ITMS: MacOSG Podcast
     An Apple User Group 

  • HT1414 My ipad is non responsive to touch.  I have tried updated the software and restoring the device to factory setting and it still does not respond.

    My ipad2 is non responsive to touch.  I have updated the software using ITunes and have restored the device to factory setting and it still does not resonse.  Has anyone had this problem?  What do you suggest? 

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My I pad is non responsive, and the screen is full of coloured stripes. How do I fix that?

    My brand new I pad 2 is non responsive and the screen is blac with horizontal coloured stripes.
    How do I fix that?

    You could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If that doesn't work then other things to try are a restore via your computer's iTunes, and then reset back to factory defaults. If none of them work then you may need to contact Apple.

  • HT201406 i have a frozen ipod touch the screen has multicolored vertical lines and is non responsive any ideas?

    i have an i pod touch which appears to be frozen it has multicoloured vertical lines on the screen and is non responsive has anyone had the same probs

    If that does not work:
    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Ipod touch 4th display problem - Non-responsive

    Good afternoon.
    iPod touch 4th Gen is non-responsive to the screen.  Will display "slide to unlock" but is unresponsive to touch.   Screen also has vertical and horizontal lines which appear all the way across the screen.  Interestingly the siri will come on if you push the button.  In other words siri works, the display shows full charge and directional arrow.  It would appear that the screen is non-responsive and displaying these lines but the underlying operations are fine.  Siri will answer a question.  Of course I've reset and also restored everything to factory settings and latest software updates.  I don't have any software on the iPod that wasn't from the iTunes store.  BTW, there's been no trauma to the screen or case.  I'm beyond 90 days from purchase, but under one year of ownership.
    Any ideas?  Thank you.

    If you restored as new and the problem persists then you have a hardware problem. If you have had it for less than a year it is in warranty so take it to an Apple Store and have the iPod replaced.

  • Dynamic Linking fails aerendercore non-responsive.

    I sent this bug to Adobe:
    ******BUG******
    Concise problem statement: Dynamic Link Server fails to connect in Media Encoder--aerendercore in non-repsonsive state.
    Steps to reproduce bug:
    1. Usually happens after using Media Encoder several times in a row to attempt the render of an AE sequence either by sending the sequence to ME from AE OR by trying to dynamic link to the sequence from ME.
    Is fairly reproducable here
      Results: Nothing added to cue or Dynamic Link Server never shows results.
    Expected results: For either method to work as designed.
    Force killing the process, aerendercore, (which shows as non-responsive in the Activity Monitor) allows normal operation as expected for a while.
    Dynamic links suck, you know that don't you?
    Lance
      Model Name: Mac Pro
      Model Identifier: MacPro5,1
      Processor Name: 6-Core Intel Xeon
      Processor Speed: 3.33 GHz
      Number of Processors: 1
      Total Number of Cores: 6
      L2 Cache (per Core): 256 KB
      L3 Cache: 12 MB
      Memory: 32 GB
      Processor Interconnect Speed: 6.4 GT/s
      Boot ROM Version: MP51.007F.B03
      SMC Version (system): 1.39f11
      SMC Version (processor tray): 1.39f11
    NVIDIA GeForce GTX 680 2048 MB
    All latest updates/drivers

    I took a look at Apple's source code changes to Cyrus IMAP, which is working with Open Directory. I did a diff against the original 2.2.12 sources using FileMerge and I see that Apple added code to look in Open Directory for user name and pass. So this explains why IMAP works but sendmail does not.
    A pertinent question at this point is: Has anyone ported sendmail to Mac OS X Open Directory, similar to what Apple did with IMAP? If so, it would save me from trying to do it myself. I can probably merge the IMAP additions into sendmail, and this would allow Workgroup Manager accounts to send SMTP using SASL authentication.
    Alternatively, the easier path seems to be to create a separate database for sendmail SASL, which isn't too far from what they recommend anyway.
    No comments from anyone?

  • Non responsive home button ip4

    Hi,
    Is anyone having a problem with non responsive home button on the iphone 4.
    I have a unit hat i sabout 6 months old and it has just started having this problem where i need to press the home button about 5-6 times before it works.
    Tiddler

    Do the basic troubleshooting steps described in the iPhone User Guide (Appendix B):
    Restart
    Reset
    Restore from backup
    Restore as new
    If the last step doesn't help, there is a hardware problem with the home button.  Take it to Apple or whoever provides iPhone warranty service in your location.

  • Non responsive/entirely frozen iPod.

    [Its one of second generation nanos]
    So, I was playing music on my new iHome. I paused it so I could change the song, when it became totally non responsive.
    I put in its USB cable, and iTunes didn't even register that it was plugged in. I tried the 5 Rs, and it didnt do anything.
    The hold wont work, it wont restart, it's completely frozen.
    I really don't want to go down to the Apple store... Can anyone help?
      Windows XP Pro  

    Welcome to Apple Discussions!
    Try resetting your iPod using the steps listed here...
    http://docs.info.apple.com/article.html?artnum=61705
    It may take several attempts. That article also has tips if your iPod won't reset.
    If you can't get it to reset after several attempts, then you may need to just disconnect the iPod and wait for the battery to drain.
    btabz

Maybe you are looking for

  • Purchase order  and supplier details?

    tables to included for listing purchase order details and the secondary list of information about supplier

  • XML Publisher (EBS) Bursting and Group By

    I have a feeling I already know the answer to this question, but maybe not and there is a way around it. I'm using the seeded report Deposit Advice XML from EBS, and I copied it so I can use bursting. Here is my problem. The xml is not grouped by the

  • PDF files can not be printed

    Good time problem with printing PDF files to the printer. While all other documents (doc) printed without problems. The problem is not in the Preview.app, as doc files from it printed without problems. Just tried the program adobe acrobat, just does

  • My mid 2007 iMac doesn't recognise 2GB RAM module in DIMM/1

    I am trying to upgrade the RAM in my mid 2007 iMac from 1GB to 4GB. It originally had a 1GB module in slot DIMM/0 and nothing in slot DIMM/1. I inserted the two new 2GB modules, one in each slot but DIMM/1 just reports as being 'empty'. I have tried

  • Premiere CC constant crashing on MBP Retina with latest updates

    I've had this problem in the past with Premiere and I suspect it's to do with their poor GPU support for the Retina, but this morning my Premiere has decided to crash approximately every 10 minutes, citing a "serious problem" Here is the log report: