Apple TV not starting anymore after update

My Apple TV is set on applying updates automatically. When I started it yesterday it showed a message that an update had failed and encouraged me to perform the update manually. I did so in the settings and everything looked normal. The updated was first downloaded and then the installation performed however at the end of this task the Apple TV shut down and now I cannot start it at all anymore. Holding down Menu and Down on the Apple Remote for six seconds does not work either.

If you really want to restore your system [this link|http://docs.info.apple.com/article.html?artnum=61802|How to restore your Apple software] might be of some help... It boils down to this:
*Restore Mac OS X and all bundled applications without erasing the Mac OS X volume*
1. Back up your essential files. This is a wise precaution even though you won't be erasing the volume.
2. Insert the Mac OS X Install disc that shipped with your computer.
3. Double-click "Install Mac OS X and Bundled Software."
4. Follow the onscreen instructions to reinstall all software.

Similar Messages

Word will not open anymore after update

Word will not open anymore after update

Hold down the Shift key when launching Word.
If that fails, try deleting this file.
~/Library/Saved Application State/com.microsoft.Word.savedState
Log out under the Apple in the Menu bar.
Log In and launch Word.
Still failing...
If Word failed to launch in Guest, then you need to re-install Office.
Microsoft Office for Mac 2011 14.4.1 Update (If you have an early installer you'll first need to update to 14.1.0)
Microsoft Office for Mac 2011 14.4.2 Update (requires 14.1.0 to be installed)
Important to restart after each updater.

Itunes does not start anymore after upgrade to 6.05.20

I upgraded itunes to the current version and after that itunes does not start anymore. I scanned for virus with an up-to-date scanner, scanned for adware with Windows defender and ewido and used the tips from http://docs.info.apple.com/article.html?artnum=42963
I run itunes on Windows Server 2003 which worked fine for three years. I know it is officially supported on XP only.
I deinstalled itunes and reinstalled afterwards no change. The windows event log shows some erors
Faulting application iTunes.exe, version 6.0.5.20, faulting module shell32.dll, version 6.0.3790.2662, fault address 0x0015af84.
Any other idea?
Thanks
Christoph

ok, so I am not sure if this is legal or not, but there is a site called oldversion. Go there, and you can get past versions of applications such as aim , and in this case, itunes. just uninstall your other itunes first.
Sometimes different versions of appications run better on different computers. this new itunes probably just has something the last one didnt that cant run with what you have on your computer

New Macbook Pro does not start up after updating...HELP!!!

Hi,
My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
Can somebody please help me?

You should probably post your question in the MacBook Pro discussions:
http://discussions.apple.com/category.jspa?categoryID=190

Apple TV 3 doesn't start anymore after update

After installing the current software update my ATV3 didnn't start anymore.
LED is blinking slowly forever.
So I connected it to ITunes with a Micro-USB cable to restore it. Restore went fine.
Back on the TV with Ethernet connected I can choose my language then the screen gets dark for a moment and I'm back at the screen with the language chioces.
When I disconnect the Ethernet cable, I get to the "Choose the WiFi Network or connect Ethernet" screen.
-> my Wifi Network is not shown (its normally visible)
-> when I reconnect the Ethernet cable I'm rebooted back to the language coice again.
Retried the USB based Restore, Checked Firewall -> there I see that it gets the correct IP (it has a fixed one) and pacet capture shows hat it does a successfull http and an https request that seems to be cut short. No packets show up as blocked.
I stopped the DHCP server to get it to manual configuration -> still reboots as soon as it gets network.
Disconnected all other Apple devices from the net (might be a Bonjour problem) -> still reboots.

After posting this I found this thread:
https://discussions.apple.com/thread/4350553?start=0&tstart=0
Many have this problem, solution that worked for me was downgrading to 5.0.1 like described in the thread.

Solidworks dont start anymore after update.

After Snow Leopard update few days ago, Solidworks on my bootcamp partition dont start anymore. What can I do?

Notes
SolidWorks Product Support Lifecycle
Windows Home Editions are not supported
Apple Macintosh®-based machines running Windows using Boot Camp are not supported
Office 2010 feature 'Click-To-Run' is not supported
I found this on the official Solidworks site.

Macbook does not start anymore after upgrade to Snow Leopard

I successfully upgraded my MacbookAir to Snow Leopard, but my son's Macbook refuses to start after having been upgraded.
Please help!

Hello,
my MacBook Pro (late 2008 unibody) just needs a main logicboard replacement, fortunatly still within warrenty, after updating to 10.6.0. I experienced the following: With an update from 10.5.6 to 10.5.7 the MBP freezed within 10min. after reboot, with every restart it freezed after a shorter period and finally freezed during the boot process. I've mounted the MBP as an external HD to my iMac, did an backup and deleted the internal MBP harddrive by overwriting it with zeros. I did the usual procedure of resetting SMC, P/V-RAM and reinstalled 10.5.6 - everything was fine again!
When Snow Leopard came out, I updated again, hoping the issue has been repaired. BUT I experienced the same problems and with some system permission deleting I got SL running as long as I did not turn on AirPort. As soon airport is activated and an internet connection is established I could count the seconds until the mac freezes. And it will only come up again by deleting the system configuration preferences (via single user mode booting).
Thereafter I was sure there is a hardware problem with the airport card or the logic board. The Apple Service Provider did not find any hardware failure and finally will change the logic board. Hopefully I got the Mac back next Tuesday. I let you know about the results.
Best regards!
PS: Obviously software could damage hardware or some hardware components used by Apple are not compatible with some of their software.

Script does not work anymore after updating to FM 12.0.3

Hi,
With TCS5, Robohelp would crash when importing FrameMaker books to RH, because the FM files had embedded graphics. So, I found a script to externalize the graphics before doing the import (the script is: ExtendScript of the week: Externalizing Graphics « TechComm Central by Adobe). However, this script is not working since I updated from 12.0.2 to 12.0.3. And without this script, we can't create HTML5 output!
Although I wrote a few simple scripts, this one is quite complex and would be difficult to debug. Anyone here knows what could have changed to make the script useless after such a small update? Or can update this script to make it work?
Thanks!

Hi again,
For those who would like to know... I made this script work with 12.0.3. I simply removed the instructions that added an item in the File menu and stuff about a report, which I don't think ever worked. So, I still don't know exactly why it didn't work anymore (don't have time or knowledge to investigate), but I'm still interested to know.

Not starting up after updates

I just got a G3 iBook 500Mhz 384Mb off ebay, OS10.4.9, which worked fine. So I decided to install some of the available software updates, instead of just letting it be! A couple of iphoto updates, keynote, iweb, java, final cut, etc,went in fine until the 10.4.11 update which would not complete - got to 12% or something and then said an error was detected so it stopped. I stopped doing updates, my boy played an internet game for a wee while, then shut down. Now it won't startup - I get a tone, the spinning gear for 20secs or so, then the blue screen with the white box saying Mac OS X and an empty progress bar, and a while later the spinning beachball appears, to be with me for a few hours. Nothing else. Some suggestions please? (I also have a MacBook Pro, with 10.4.11, if that might be helpful, and while I'm not experienced at computers, I'm quite prepared to try things.
Many Thanks.

Oh.
Ah well. I'll get back to the seller - again. He earlier suggested 1. resetting the P-RAM, 2. resetting the open firmware, 3. safe boot. None of these worked. He then suggested booting from the disc(pirated) and reinstalling. This worked to an extent, but this morning it would not start up again - but it did get as far as the login, then after logging in it went to a background, with an arrow pointer, and no further (I did leave it for over an hour), while last night it did get past that point(slowly) and worked ok.
So, now I'm trying to reinstall again ( a smaller custom install) then I'll delete the most recent previous system folder, and some other apps that came with it (pirated too!!?)
I guess I may (should) buy a retail copy.
Why didn't I just leave it alone???
Any other advice?
Regards
Roger

Slim does not start lxde after updating

Hi!
After updating the other night I cannot log in to lxde anymore. Slim gives me
Failed to execute login command
I read my way through the internet for similar threats and problems. I already checked whether my slim.conf is ok. I checked whether X is running ok. And Im not sure if it is.
I did
grep -e "2012-09-19" /var/log/pacman.log
to see what was updated. And it was xf86-video-intel and tzdata and the kernel.
Im running arch on a eeepc 701 with intel graphics. I have Slim and lxde. I can ssh onto the machine from outside.
If I take slim from the deamons in
/etc/rc.conf
I can
startx
but I only get a black screen on tty7 and on tty1 I get
No protocol specified
. And after some time I get
xinit: giving up
xinit: unable to connect to X server: Resource temporarily unavailable
waitiing for Xserver to shut down Server terminated successfully (0). Closing log file.
xinit: server error
I noticed that I didnt have "i915" in /etc/mkinitcpio.conf, so I added that and built iniramfs. But that didnt help the issue.
Maybe anyone cand help me out here?
Thanks for your time!

It definitely sounds like something went wrong with your video update. Can you downgrade to confirm that is the problem? If so, my next thought would be to remove the recently downloaded version from your package cache and re-upgrade.
If downgrading doesn't help, then perhaps my assumption is wrong, then full Xorg logs would be useful. Actually, they'd be useful in either case ... so can you post those (or pastebin them and link to it).

Lightroom not starting up after updating to CC (2015)

Adobe CC updated my Lightroom CC (2014) to CC (2015) Now Lightroom will not start. I have uninstalled, rebooted, installed again and still does not start up.

Tstoikka did you utilize the uninstall process documented in Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html to remove your current installation of Photoshop Lightroom? Are you able to install other Adobe Creative applications successfully?

E65 not start-up after updated new firmware

Hi,
Yesterday I conected to PC suite and updated firmware from 2.0.... to 3.0... > Everything went through smoothly. After I restored all information from back up files of PC suite, then I could not use my phone any more. Everytime I try to restart my phone, the message " Phone start-up failed. Contact to retailer "
Could any one help me to make my phone back to work, please ? Thanks a lotttttt

Try the "3 finger deep reset" which is depress these three keys simultaneously "*" "3" "green phone" and then power on phone whilst keeping those same three keys depressed until you hear start-up tone.
This should ONLY be done if the device doesn't power up normally anymore and it wipes everything in the Phone memory that is not part of the ROM.
You will need to restore your data after this.

Isight is not working anymore after updating to snow leopard

it used to work very well. i updated snow leopard 5 days ago. i try to use skype and photo booth, it is never working again. do people have the same problem?
thank you for your information

lightwright wrote:
Thanks for the info - however surely this has something to do with the snow leopard software update - not a hardware failure or is that just a coincidence?
My iSight was working fine before I upgraded to snow leopard? Is there a software fix coming?
Welcome to Discussions, lightwright
... this has something to do with the snow leopard software update ...
You may be correct that the problem has something to do with your SL update, but, as previously explained, many of us successfully use iSight every day after upgrading to Snow Leopard, so the problem is not SL itself. If you believe that your problem is with your update, you should consider reapplying the update using the method suggested above.
If you continue to have iSight problems after properly applying the SL update, consider all relevant troubleshooting suggestions in http://support.apple.com/kb/HT2090
However, if your iSight problem continues, and if iSight now does NOT show as a USB device in your Mac's System Profiler, yours is most likely a hardware problem. In that case, contact Apple or an Apple-Authorized Service Provider for service.
If, after properly applying the SL update and using the Troubleshooting suggestions, iSight IS recognized in System Profiler but still does NOT work with any of your video-enabled Apple software, your disk may contain some pre-SL software that is causing problems. Either erase the disk and apply only Apple software to see if that fixes your problem, or seek help from your Apple-Authorized Service Provider.
... Is there a software fix coming?
¶2.1.1 of Terms of Use for Apple Discussions prohibit us from speculating on unannounced products, including updates.
EZ Jim
MacBook Pro (13 inch, Mid 2009) 2.26GHz w/Mac OS X (10.6.1) G5 DP 1.8GHz w/Mac OS X (10.5.8)
G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) LED Cinema Display External iSight

Apple tv not Privat Freigabe after update to 6.0

after the update to 6.0 the apple tv can not find itunes sharings

Welcome to the Apple Community.
The following article(s) may help you.
Understanding Home Sharing
Setting Up Home Sharing On A Computer
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

IPhoto won't start anymore (after update to 9.2.1)

Hi all,
I have been getting this message when I try to start iPhoto, including when starting it with cmd and alt pressed. Can someone please help me?
Thanks in advance.
Process:         iPhoto [44262]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.2.1 (9.2.1)
Build Info:      iPhotoProject-628000000000000~3
Code Type:       X86 (Native)
Parent Process: launchd [137]
Date/Time:       2011-11-23 21:34:51.028 +0100
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          47776 sec
Crashes Since Last Report:           1
Per-App Crashes Since Last Report:   1
Anonymous UUID:
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
    0x1000 -   0xd1afeb com.apple.iPhoto (9.2.1 - 9.2.1) <68601E93-E4CF-3B4C-AFFD-4781A92DD58B> /Applications/iPhoto.app/Contents/MacOS/iPhoto
0xe83000 -   0xf63fe7 org.python.python (2.6.7 - 2.6.7) <61DBA92A-C39A-3A52-86F2-59CF9D310CB4> /System/Library/Frameworks/Python.framework/Versions/2.6/Python
0xfae000 - 0x114effb com.apple.geode (1.5 - 151.51) <28D29759-F356-3608-B9CF-3031F3299B1B> /Applications/iPhoto.app/Contents/Frameworks/Geode.framework/Versions/A/Geode
0x11ee000 - 0x11f0fff com.apple.iLifePhotoStreamConfiguration (2.2 - 2.2) <4FA61CE9-1718-3E07-9896-0023A2A49699> /Applications/iPhoto.app/Contents/Frameworks/iLifePhotoStreamConfiguration.fram ework/Versions/A/iLifePhotoStreamConfiguration
0x11f6000 - 0x1205fff com.apple.iLifeAssetManagement (2.0 - 2.33) <8346DE35-5F86-3338-9913-B035B3EE5435> /Applications/iPhoto.app/Contents/Frameworks/iLifeAssetManagement.framework/Ver sions/A/iLifeAssetManagement
0x1212000 - 0x123affb com.apple.iPhoto.Tessera (1.1 - 60.10) <7BA9184E-0A00-3083-8322-772ECBDD30C9> /Applications/iPhoto.app/Contents/Frameworks/Tessera.framework/Versions/A/Tesse ra
0x124b000 - 0x1272ffb com.apple.iPhoto.Tellus (1.3 - 60.10) <4AABB0BC-AC97-3EE4-BF0F-D8499DDB57C0> /Applications/iPhoto.app/Contents/Frameworks/Tellus.framework/Versions/A/Tellus
0x1287000 - 0x1291fff com.apple.iphoto.AccountConfigurationPlugin (1.2 - 1.2) <3B68F126-D783-3F86-AF04-A0F6A459BE67> /Applications/iPhoto.app/Contents/Frameworks/AccountConfigurationPlugin.framewo rk/Versions/A/AccountConfigurationPlugin
0x8febe000 - 0x8fef09c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.20f4
Graphics: ATI Radeon HD 2600 Pro, ATI,RadeonHD2600, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F5D0000, 0x436F6D707573746F63782028435358292020
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F5D0000, 0x436F6D707573746F63782028435358292020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.11)
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD3200AAJS-40VWA0, 320,07 GB
Parallel ATA Device: PIONEER DVD-RW DVR-K06A, 111,5 MB
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: SDDR-189, 0x0781 (SanDisk Corporation), 0xb7bd, 0xfa400000 / 3
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa200000 / 2
USB Device: SCX-4623 Series, 0x04e8 (Samsung Electronics Co., Ltd.), 0x3434, 0xfa210000 / 5
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfa220000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x1a100000 / 2

You need to reinstall as iPhoto is missing bits of itself.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Apple TV not starting anymore after update

Similar Messages

Maybe you are looking for