Apple TV not working with new softwear iOS 7, Apple TV not working with new softwear iOS 7
Since updated softwear on iPad to 7.0 Apple TV not working?
I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly). Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.
Similar Messages
-
i have iPhone 3G with ios 4 but now i update new version and my phone is not working.it is not activating..when i tried it says please insert sim and try again..any one plez help
Try this article if you haven't already
This is the only possibility that came to my mind when reading about your issue:
"If an iPhone, iPad, or iPod touch is not recognized in iTunes on Windows, the Apple Mobile Device Service (AMDS) may need to be restarted" -
When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille -
3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...
Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok. -
I have an iMac 8.1, OSX 10.6.8, Boot Camp 3.2 running Windows XP. My original keyboard (MB110LL/A) was damaged by a water spill. I ordered a new one from the Apple Store. They sent me MB110LL/B, function keys need updated drivers (Boot Camp 3.3) which will only install if Windows 7 is installed. I have a large amount of older software that runs under XP but not Windows 7. The Apple support team basically said "too bad". If they replace a keboard model with a new model, they should at least make it backwards compatable or provide a Boot Camp update that will allow this model to work on older iMacs. Reloading Bootcamp 3.3 several times has no effect because it does not detect Windows 7. Any Ideas or help would be appreciated.
It is free. It is beta. It works well - I use it on mine and two PCs as well...
MS Security Essentials will no longer install due to compatibiliity issues - that is the idea of a beta - and the RC could be out in June.
Windows 7 doesn't work great on any Mac, or Apple drivers, fan cvontrol to manage heat, and other issues.
Put 8 in and get to know it, then when the RC comes out you'll be ready -
My hard drive crashed on my Imac 24" 2009, I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
What external DVD can I get to work with the IMac? The Apple super drive is not compatible.Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.
-
I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?
Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W. -
Hi my old phone 4s after upgrading to IOS 8, Calender is not working. Just a blank page and it quits automatically. I bought a new iphone 6+ and after synching , it also showing the same issue.
There's no way a software update causes a hardware issue. This is just coincidental. Bring your phone to Apple for evaluation and possible replacement.
-
My magic trackpad fell yestarday and the switch button appeared blocked and it is not possible to make it working. I contacted Apple support and it is not competent in giving a solution. They only suggest replacement and pay a new one. They simply do not repair it. It is a very poor solution since there would be other solutions. Anyone may help me with a solution?
Hello folks!!!. I found out a solution. I simply take the start button off with a screwdriver and now the trackpad works properly. Since it initializes automatically when the computer turns on, the magic trackpad works without the need of using the start button. The only drawback is that there is a loss of aesthetic because the trackpad has now a gap, which was occupied by the button, but it is not easy to notice. It seems to be a better solution than that given by the apple customer service, which was to pay a new one.
-
Hi.. I am reinstalling ios on macbook.
While doing process, it asks for the Apple id and password. I am providing the id/password but it displays the message that apple user id has not been used with apple store... what shall I do to make my id work. Please assistJust to clarify, iOS is the operating system for iOS based devices such as the iPod touch, iPhone, and iPad.
Your Mac runs on OS X.
As for your Apple ID, help here > Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store -
Since upgrading iPhone 4S to new OS it has not worked. Now over 10 days with no phone, talked to Apple Care in Colorado and Australia over 10 hrs on phone 7 consultants. All that has to happen is for someone at Apple Care to reset a password? Phone and Apple ID don't recognise each other. This is nuts!
The phone will not recognise Apple if passwords or secret questions
-
I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work
So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
Reboot both the computer and the phone and try again. -
My iphone 4 power button does not work can i take it into apple store and replace it or what are some options
Assuming it is out of warranty Apple Genius bar will exchange for an out-of -warranty replacement unit identical to the to donor
In US $149 for in iPhone 4 -
I have similar problem, my apple tv which has always worked properly with my Samsung tv will no longer play any audio after the latest 5.1 upgrade. Very frustrating as it was working perfectly before. I am starting to not trust apple upgrades until proven for example ios6 on iPhone with that stupid map app instead of google maps.
I just want to buy and hear my iTunes music and videos on my apple tv, could before cant now. Thank you apple. Time to pack up the apple tv and start torrenting without the ios-bs.
Disheartened apple fan.Welcome to the discussion forums.
Try going to synching in the sources menu on your tv and selecting 'change itunes library', when it gives you the passcode check itunes to see if the tv is showing up as a new device, if so try entering the pass code. It may be that your tv is seeing itunes as a different library because of a recent upgrade. -
My old nternet account was cancelled and with it my emails. I updated my apple id and password in all my devices (ipad, iphone, imac, except for my moms iphone. I am trying to log out from my old account and set her up with her own apple ID and iCloud etc but it does not let me log out. I have a notebook with all my passwords in it so I know for a fact the password for the old ID/ email is correct yet a window keeps popping up that it is incorrect. I have spent hours reading and trying to fix it myself and nothing is working, same window keeps popping up. Any ideas on what to do? I have an iphone 4S, all software up to date and I made sure my moms phone is also updated. Thank you, any help is greatly appreciated.
Hi ccharat,
Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
I hope this helps,
-Joe -
The title alone speaks to my frustration about this issue.
Used the process that was recommended by Apple to migrate from my "Lampshade" iMac (PPC running 10.4.11) to the new iMac (Intel running 10.8.2) and I got bupkiss...
Just a spinning wheel (not beachball) and no drive recognized using Migration Assistant for both nor when using Target Mode on the iMac running 10.4.11 and Migration Assistant on the iMac running 10.8.2. Which is ironic, or more accurately oxymoronic, since the iMac in Target Mode (10.4.11) is recognized on the desktop of the iMac running 10.8.2 but not in the Migration Assistant. And before you can misdiagnose..it is not the Thunderbolt connection since I have the Apple recommended Thunderbolt to Firewire adapter and also used the Firewire 400 to 800 cable to expedite the transfer.
On a personal note...
I'm not bashing Apple for this...they are "head and shoulders" above the competition in what they do but I've been burned a few times so I feel I can share a small bit of loyal customer advice...I understand your iOS and mobile products hold huge sway in company focus and market-share but I find it a tad unwise to slack on the desktop applications. I don't recall any app for the iPhone/iPad family being made on the iPhone/iPad...only from desktop applications if I recall correctly. And how can I clearly "Move my Mac even further ahead" as your marketing states when I can't even migrate my files from my old Mac to my new one in a simple fashion as per your instructions?
I thank anyone in advance with an answer or even a workaround for this issue and please have a great day.http://support.apple.com/kb/ht4889
Migration from Mac OS X v10.4 Tiger to OS X Lion
Migration from Mac OS X v10.4 computers to OS X Lion over your Wi-Fi or a wired network is not supported. However, if both Macs are equipped with a FireWire port, you can use Target Disk Mode to transfer your data:
Verify that both Macs are equipped with a FireWire port. Note that different model Macs may have different FireWire connectors, which will require an appropriate cable, such as FireWire 400 to FireWire 800.
On the Mac you want to transfer data from, Restart, and immediately hold the T key.
Wait for the FireWire logo to appear on the screen. If it does not, restart and try again.
Connect both Macs via the FireWire cable.
On the Mac you want to transfer data to, Open the Migration Assistant application.
Select the option "From another Mac, PC, Time Machine backup, or other disk" and click Continue.
Select the option "From a Time Machine backup or other disk" and click Continue.
Select your other Mac's volume, such as "Macintosh HD", from the list, and click Cont
EDIT: Actually I realize you did follow these directions and if your drive is seen on the new Mac it should work. You're entitled to free Apple support with the new purchase, I'd give them a call.
Maybe you are looking for
-
Simple sample code to display a Crystal Report from Crystal Enterprise?
I am looking for a sample application that will "simply" view a report stored on our Crystal Enterprise server. I have looked at "boesdk_net_samples_12.zip", but that isn't really what I am looking for. And, the "CrystalReportViewer" and "CrystalRepo
-
Hi ,All, There is an error occured when i use service call to program in web dynpro. that is "Exception NO_ENTRY_FOUND that Is Not Class-Based Occurred ". can someone tell me what i should do to modify it? Thank you very much.
-
How to organize photos in iPhoto after editing in Photoshop Elements?
Hello. This is my first post with this group. I have iPhoto set up to automatically go to Photoshop Elements (PE) for editing. That works just fine, but I have never learned an easy way to get edited images back into the original iPhoto folder (Event
-
Error When Transporting the DTP's
HI All, I was facing the problem with Transporting the DTP's to Quality. Transport log error : Program Terminated (job : RDDEXEC,no.: 09463801). (Program RDDEXECL'Which was started in the background,was terminated abnormally.) W
-
I don't know if this is a question or info, so I went for the "safe option": newbie section. Since I kernel updated(from 2.6.26 to 2.6.27) the module controlling the system beep has change name from pcspkr to snd_pcsp. Is it more to it then a name ch