Apple TV on Interactive Whiteboard with no sound?

Working in a school, iPads and Apple TV are a vital part of day to day lessons. We connect Apple TV to the HD projectors in each room for Airplaying purposes on the iPads. When it is mirroring on to the projector, and on to the Whiteboard, we can get a sound output from the audio of the projector itself, but not from the new speakers linked up to the Interactive Whiteboards. We have tried changing the audio output settings as there was no sound initially, and have been successful as far as getting sound coming from the projector. However the sound level is too low and quality is too poor compared to the new speakers attatced to the whiteboards.
I was wondering if there is any way to have the sound coming out of the new speakers rather than the projector so children can share their work they have created with good audio.
Thanks for taking the time to read this.

When I connect the ATV to the receiver, (so the ATV is no longer connected to the tv), no matter what input setting I set for the receiver, the tv shows "No Signal" and of course, no sound of a movie track. The only way I see the movie is for the ATV to be connected to the HDMI3 jack on the tv, then I see the movie but no matter what I set the receiver input to I get no sound. Perhaps the receiver should be set to "multi-ch" but then I don't know how to select one of the supposed multi-channels. Does thaat make sense to you? It's Greek to me!!!

Similar Messages

Is Apple going to manufacture IPAD with improved sound quality?

Is Apple going to manufacture IPAD with improved sound quality? I don't like to stream movies on IPAD due poor sound quality.

We have no way of knowing Apple's future plans. Speakers or headphones make a huge difference, maybe you can give either of them a try.

Mirroring with Apple TV to an Interactive Whiteboard

I'm using the latest gen Apple TV and want to mirror my MacBook Pro to an Interactive Whiteboard. It mirrors okay but I want the display output to almost fill the entire screen. The 2 choices don't give me any better options, is there a work around sop as to increase output size?

not unless the board like most tv's support streghing the image or zoom with chop top and bottom

Apple TV to the interactive whiteboard I'm getting "snow"

When I hooked up the Apple TV to the interactive whiteboard I'm getting "snow" and intermittently see what I'm supposed to see with the Apple TV? I have set up 30 other Apple TVs exactly the same way without any issues. I have unhooked and rehooked but no difference. It worked previously in the school year; however I need to change WIFI code and it is not working properly now.

Welcome to the Apple community.
That sounds like the HDMI connection, are you able to test elsewhere with another cable.

TS5150 i'm having trouble with the sound during playback on my apple tv

theres no sound during playback on my apple tv

Welcome to the Apple Community mdez3799
Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
If you are using a sound system/receiver, make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

Can garageband be used with interactive whiteboards?

Hi:)
Does anyone know if the garageband software program can be used with an interactive whiteboard? I am doing an assignment on the use of interactive whiteboards in classrooms and was hoping to include garageband as an example of a motivational software program that could become an even more effective learning tool when projected onto an interactive whiteboard for whole class input and discussion. I am having a lot of trouble however finding any evidence that garageband is compatible to use with interactive whiteboards, and would be very appreciative if anyone could refer me to websites or other resources that provide proof of compatibility (providing they are compatible of course!)
Thanks so much if anyone can help!!
Ariana

It's actually a hypothetical situation so there is no actual interactive whiteboard. If you know of evidence that shows that garageband can be used with a "smartboard" (if it is an interactive whiteboard), then that would be helpful as I could then reference it from that source to explain how it would be in reality. I just need concrete evidence that it is possible - it doesn't matter what brand of IWB it is.
Thanks

Adobe Interactive Forms with Browser Apple Safari and Mozilla Firefox

Hi Experts,
We have a requirement to implement HCM P&F using Adobe Interactive Forms. These Adobe Forms will be accessed using Browser Apple Safari and Mozilla Firefox. I have come across that the Adobe Interactive Forms are not supported on these browsers. In the same regard I have also gone through the Product Availability Matrix by SAP which specifies that Forms are not support on these browser and neither SAP has future plans to support them.
PAM can be found on link: http://service.sap.com/pam
I would like to know from experts that if any of the project has successfully implemented Adobe Interactive Forms with browser Apple Safari and Mozilla Firefox or
is there any solution which can make these forms work successfully on browser Apple Safari and Mozilla Firefox.
Your early reply will be highly appreciated.
thanks
Manoj

Hello,
Mozilla Firefox is supported for Adobe Interactive Forms on Windows operation system.
Unfortunatelly we do not have support for Mac OS and Safari browser.
Please re-check the PAM.
Best regards,
Dezso

I am having problem with my sound, after i updated to ios 6, apple please help

i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help

Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues.

TS5150 With certain movies I have downloaded digitally through Itunes or certain movies through Netflix played through Apple TV, I am only getting partial sound. I am missing one or more sound tracks. Am I missing something in the settings for Apple TV?

With certain movies I have downloaded digitally through Itunes or certain movies through Netflix played through Apple TV, I am only getting partial sound. I am missing one or more sound tracks. Am I missing something in the settings for Apple TV?

Are you using a stereo receiver or surround sound system for the audio by chance. What you are describing sounds like a receiver that is not setup correctly, or does not have the speakers connected to it correctly to support Dolby surround, 5.1 or 7.1. Which is why it is only happening on some content. It would only be on the ones that are encoded to support Dolby audio.

Interactive Whiteboards and the Ipad

Hi there sports fans.
I work in a special needs school and the iPad is the way of the future... but, I need to be able to visually demonstrate iPad use through and interactive Whiteboard... So this is the crux of the question:
How can I use my **Interactive Whiteboard* to* show my Ipad screen and *control my Ipad?*
*please note... I do not want to control the whiteboard... that I can do already.
Thanks friends. let the educational revolution begin!

There are a number of options available. You can use Apple's iPad to VGA adaptor to connect the iPad to your IWB via a VGA cable. This will display your iPad on your IWB to model the activities to your students. This doesn't transmit sound from the iPad, you would have to use a 3.5 audio jack to your amp or sound setup to get the full experience.
The VGA adaptor is limiting in length but works great. Your second option is Apple TV. This will mirror your iPad to your IWB wirelessly. This uses Apple's Bonjour to communicate across your wireless network. You may have to enable multicast on your controller for this to work. Apple TV require a HDMI connection to your display. If your IWB projector does not have a HDMI input, then you can get a HDMI to VGA convertor to get it to work. Depending on your audio setup, you may need a DAC convertor to transmit the audio across wireless as well.
This is great and enables you to walk throughout the school (depending on the strenght of your wirelss network) and mirror directly to your IWB. This only works with the iPad 2 and new iPad. The iPad 1 will not mirror. The real value comes when you can ask the children to display their iPads on the IWB wirelessly from their desks to showcase their work. You can put a passcode on Apple TV to prevent this from happening without permission, or if you have multiple ATV's in the school.
The alternative wirless option is to use some software such as Reflection or AirServer. This software is installed on the PC or Laptop connected to the IWB. The iPad then uses the same method for Apple TV but goes to the computer beofre diplaying on the IWB.
AirServer offers the ability for mirror of up to 16 iPads at the same time. Brilliant for comparing work the children have done. AirServer is available on both a PC and Mac, although at present, only the Mac version mirrors audio and visual. I understand that a PC version is in development and will be updated soon.

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen.

After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?

Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

HT204400 Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen

Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help me

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

I have m4v files that have subtitles and sound options they play fine on my computer in itunes and but when i watch them on my apple tv there is video but no sound ... why ?

I have m4v files that have subtitles and sound options they play fine on my computer in itunes and but when i watch them on my apple tv there is video but no sound ... why ? all my other videos are fine and they in mp4 format.

Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

Having problem with Ipod Sound

I am having a huge problem with the sound for my Ipod. I was recently at a concert and using my car audio conversion in both my Ipod and my girlfriends, when I unplugged it from hers to mine I lost all sound to my Ipod when I plug in my headphones now or when I put the receiver back into the bottom. I have reset and restored it and run the diagnostics check to see if it could be the USB or the headphone Jack. Both are in working order but I am still not getting any sound to my Ipod. Can anyone help me with this problem? My Ipod is my life staple for my morning commuet.

You can try to following to rule out/fix a software problem:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still a problem you very likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Apple TV on Interactive Whiteboard with no sound?

Similar Messages

Maybe you are looking for