Apple TV on older TV

I I have an older tv that uses component video and audio.  Is there a converter that converts hdmi to component so I can use my Apple TV

There are no simple cables, you need a device to convert a digital signal to analogue - such devices can be nearly as expensive or more than an AppleTV.
Do you mean component (3 leads red/green/blue sockets) rather than composite (yellow) - composite is the worst quality video you'll get and may not be a good experience.

Similar Messages

  • How to connect apple tv to older tv's through dvd player?

    Is there a way to connect the apple tv to an older tv through a dvd player or just to the tv?
    thx

    No, you have to connect it to the TV. If you don't have an HDTV you would need to find a converter and HDMI is the only thing officially supported on the current model so there's no guarantee it'll work. Some have had success, others haven't

  • How do I erase an older Western Digital 1TB mirrored hard drive? Newer drives can be erased via a WD Utility, but the WD site says to "ask Apple" about the older ones.

    I have a MacBook Pro with OSX 10.7.5.  The hard drive is approx. six years old - a Western Digital for Macs, mirrored with 1TB on each half. 
    Because the drive is "infected" with Time Machine backups that I can't erase, I have removed all important files from the drive and now want to wipe it clean.  I've done this with new drives, via the WD Utility that came with the drive, but the older drive doesn't have such a utility.  The WD site only has a protocol for PCs. 
    I find nothing on the Apple site itself.  Can you community members help??
    (I've tried various ways of deleting the Time Machine backups, but nothing has worked.  The instructions for that, which I read on a community support site, were too advanced for me to understand.  A Mac IT guy tried to erase the backups, but he didn't know how either.  So that is why I'm erasing the drive totally.  I've learned my lesson and have a dedicated Time Machine drive now.)

    Please be clear:
    This is a mirrored RAID that you use as the startup disk?
    You now have a different startup disk and wish to erase the RAID mirror?
    Do you wish to continue using the RAID for backup?
    If all you want to do is erase the RAID to get rid or the Time Machine backups, the use Disk Utility to erase the mirror disk mounted on the Desktop.

  • Connecting apple tv through older receiver to older tv

    I have an older (9 years) Yamaha a/v receiver and (same older) Pioneer Elite plasma tv. Neither has hdmi. I am attempting to connect to the receiver via optical cable for sound and RGB (component) connectors for video. I am going through the "D-TV" (digital tv) component hook-ups on the receiver. I get no picture.
    I have tried apple's suggestion of changing the video mode ("menu" and "+" on the remote) to no effect.
    The receiver and tv function fine in all other respects.
    Is there something I am missing?
    All sugestions gladly accepted!

    The Apple TV doesn't output in RGB, its component signals are YCbCr. However, I suspect that your TV is also expecting YCbCr so this isn't the likely problem (i.e. it's just a mistake in your terminology). In any case, if your plasma TV supports only RGB then the YCbCr signals won't work without an color space converter.

  • Just bought a 5C iphone and when I when I tried to download everything from my computer it won't let me because I need to upgrade the IOS.  Unfortunately my apple computer is older so it won't let me download.  What else can I do?

    I just bought a iphone 5c and when I tried to use my computer to download the syncd version of my phone I found out I needed the latest version of the IOS.  I tried downloading the latest version and it won't let me do it unless I upgrade.  What else can I do?  I don't want to buy a new computer....

    If you want to synch your iPhone with iTunes on your computer, you will need to meet the minimum requirements.  If this requires you to upgrade your computer then you will need to do so.  System requirements for the iPhone 5c are clearly posted on Apple's website and this should have been considered before you bought your phone.  There's no way around the system requirements.

  • Possible to get Apple TV for older TV

    I'm hoping there is a way (and if so, how) to hook up any generation of Apple TV to this television http://www.cnet.com/products/samsung-hln567w/specs/
    If so, PLEASE respond ASAP!
    Thanks so much in advance for any help,
    Christian

    HDMI is the only supported method so there will be no guarantee with using a converter. If it does work you will be unable to play protected content (ie iTunes, Netflix)

  • Can I hook Apple TV to older tv

    I GOT A CONVERTER BOX THATS HAS ALLOWED ME TO CONECT APPLE TV BUT IM GETTING REALLY BAD BLEED-OVER IN THE SOUND

    An HDTV is required and HDMI is the only supported method. So there won't be any guarantee with any converter, and it will be hard to help when using an unsupported setup.

  • HT2204 How to update Apple ID for older apps?

    I have recently changed my Apple ID, but now every time I want to update an existing application, I'm prompted to enter the password for my old Apple ID. How can I fix this?

    Welcome to Apple Support Communities
    You can't move your apps to another account, so you must use this Apple ID to update those applications

  • How to install older version of ios on iphone4, as latest iOS on iphone4 is crap. why dont apple allow for downgrading the iOS, if not let them replace my phone free.

    worst latest iOS on iphone4, hardware and software combination is worst, let apple provide the older version of iOS or else let them give me a new iphone latest mobile

    they have to ship me free latest iphone.
    Ha ha ha ha ha!!!! Dream on!!

  • How to upgrade First Generation Touch to use Remote for Apple TV

    Hello and thanks in advance.
    Can anyone tell me how to upgrade the OS for a 1st Generation iPod Touch so that it can use the Remote App from I tunes to control the Apple TV device. It needs to be the 3.1.2 version, but Apple seems to offer only 3.1    I found the 3.1.2 version on a non-apple site and attempted to download and install it but it didn't work out. (Error 14). I was expecting to control the TV with my 1G Touch and am a little disappointed with Apple that the older Touch units seemingly cannot do this.  Any help appreciated.

    You can buy 3.1 thru iTunes then use it to upgrade to 3.1.3.
    http://support.apple.com/kb/HT2052

  • Why can't I download an older version of Pages from the App Store?

    Is there any way to download an older version of Pages? Specifically, version 4.2?
    Upgrading my OS from 10.6.8 is not an option, and I live overseas in a place where I'm completely unable to recieve disks for older iWorks through the mail. This is frustrating... the App should either be compatible or alternatively should keep older versions available, if not on the app store then on the website somewhere. I'm willing to pay Apple for an older version, but have yet to figure out how that's even an option.
    Would love to know if there's a way to get Pages 4.2 that I've missed. Thanks

    Google "Apple iWork '09 Installer".
    Apple seems to have pulled the plug on the manual updaters so you may have to Google those as well.
    Peter

  • After update IOS from 6.0 to 7.1, my Apple Id cannot access to my Iphone due to the Apple ID that comment on IOS 7.0.2 was not matched to the old one.

    I have gotten the problem after updated IOS to version 7.0.2.  I signed up my IPhone with su* @pttplc.com as Apple ID via older IOS version and can use it normally but after I update the IOS version from 6.0 to 7.0.2, the Apple ID that commented on my IPhone is sx* @pxxxxx.com. It look like that the number of alphabet in Apple Id is not matched. The new one is less than the old one so I cannot log in my IPhone. After that I try asking for the new password but the new password was not send to su* @pttplc.com but send to my reserve e-mail instead. Please help me to fix the problem ASAP due to I cannot access IPhone for 2 month already. 
    Please suggest the solution to reset my IPhone to normal. Please advise ASAP. Thanks in advance.
    PS. If you want any further information, please do not hesitate to let me know.
    <Email Edited by Host>

    Hey Suwat Chanpui,
    Thanks for the question. I understand you are having issue relating to your Apple ID account after updating to iOS 7. The following articles may help to resolve your issue:
    iCloud: "Incorrect Apple ID or Password" alert when setting up iCloud after upgrading to iOS 7
    http://support.apple.com/kb/TS5207
    If you recently changed your Apple ID and did not update your Apple ID on your device:
    1. Tap Skip This Step to continue.
    2. After completing iOS 7 setup, go to Settings > iCloud.
    3. Scroll down and tap Delete Account, then enter your previous Apple ID and password.
    4. If your Apple ID or password are not accepted, follow the steps in iOS 7: If you're asked for your previous Apple ID when signing out of iCloud.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    https://support.apple.com/kb/TS5223
    3. Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't work, try these steps:
    1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    2. Tap Settings > iCloud and try to sign out.
    3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    4. Tap Settings > iCloud and sign in with the new Apple ID.
    If you are instead experiencing issues with Activation Lock, the following articles may help to resolve your issue:
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/kb/TS4515
    Thanks,
    Matt M.

  • Apple A/V adapter does't work with SONY TV

    I connected my iPad 2 to a newer SONY TV using Apple's A/V 30 pin connector via HDMI and the TV does not see a signal.

    Did it work before?  Does it work with a different TV/projector?  Did it work with ios 7.x?
    Anyway,  with the introduction of ios 8.x, apple stopped supporting older a/v cables.  You need to get the latest a/v cable with the correct firmware.  There is a little chip in the a/v cable. 
    go to the apple store.  Buy a new cable.  Verify the cable works in the store.
    Robert

  • Apple TV loses connection to internet and can't reconnect without restart

    When I first purchased my ATV3 it had extremely slow buffering problems and then crashed. I had to do a full factory reset and software update. Then that problem went away. Recently it has a new problem. While renting a movie from itunes with the ATV connected to the internet via wireless (strong signal) from an airport extreme connected to my modem from cox communications (with about 30Mbps speed) it will suddenly stop and by stop I mean it leaves the movie completely and says YOUR APPLE TV IS NOT CONNECTED TO THE INTERNET.
    So if I go to my network in the apple tv menu, sure enough my wireless network is missing. But the ipad is finding it, and the imac on wireless is finding it, and it is working. So we hit restart on the apple tv. When it comes back all is good. Then maybe the movie runs ten minutes and it does it again.
    In some cases the wireless network reappears but if I select it it still says I'm not connected to the internet.
    I have to restart everytime or it will not properly reconnect to the internet or find my wireless net work and actually work and connect.
    From time to time it finds it and when I select it it asked me to log back in with password etc. So I do that, and then it says some error code (sorry didn't write that one down) and says try again later.
    I have not tried hooking up my ethernet cable. Since my other devices all work while the apple tv is kicking me off, I don't believe it is a problem with our wireless network. And there are no buffering issues.
    Anyone heard of this ?
    Should I reset my factory settings? (I don't own the mini usb cable for the apple tv so connecting to a computer is not an immediate option)
    Any suggestions are welcome.
    Oh, and my original apple tv, the older model with the 160gb hard drive in it works fine. Just don't rent on it because of resolution of the older model.

    Mine is doing the exact same problem!
    Ever since I rented a movie from itunes with the ATV connected to the internet via wireless (strong signal) from an airport extreme connected to my modem from charter communications (with about 30Mbps speed) it will suddenly stop and by stop I mean it leaves the movie completely and says YOUR APPLE TV IS NOT CONNECTED TO THE INTERNET.
    So if I go to my network in the apple tv menu, sure enough my wireless network is missing. But the ipad is finding it, and the imac on wireless is finding it, and it is working. So we hit restart on the apple tv. When it comes back all is good. Then maybe the movie runs ten minutes and it does it again.
    In some cases the wireless network reappears but if I select it it still says I'm not connected to the internet.
    I have to restart everytime or it will not properly reconnect to the internet or find my wireless net work and actually work and connect.
    It has been connected in the same place for a year and never had an issue.
    Nothing has changed..... I have not added a wall to cause interference....
    My iPad and iPhone show FULL strength.
    Please help!

  • Apple TV loses picture output and status light flashes rapidly after 5 minutes hooked up via HDMI - DVI cable

    Apple TV connected to a 2005 50" plasma monitor with DVI input via belekin HDMI to DVI cable.  Unit worked perfectly long enough to get it connected to the wireless network and begin the itunes registration process when there was a loss of signal message on the screen from the monitor and the Apple TV status light flashed rapidly and continuously. Reset and reboot yeilded flashing rapid status light and no output detected from the monitor.  I contacted support online and was told to return the unit to the apple store.  I returned home with another brand new apple tv and connected it in the same manner with exactly the same results.  Is there something with the HDMI - DVI interface that is causing this?  Are there known issues with the HDMI - DVI connection to Apple TV with older plasma monitors?

    The Apple TV doesn't actually support DVI. Some have managed to get it to work others have had varying issues with it.

Maybe you are looking for