Apple TV Optical Soundoutput not working with Sony Home Theater System

I just bought a new apple tv. The setup was pretty simple, with the exception that I cannot get the optical audio output to work with my Sony home theater.
If I switch tha optical sound cable from the apple tv to the cable tv converter box I get sound fine in the sound system, so I know the sound system works fine and is setup to take input thru the optical cable.
Any one experiencing the same problem?

hey buddy,
How old is your Sony receiver? You have to be careful here because receivers that were made about 2 years ago, a lot of the lower range one only does HDMI pass-through. This means that your receiver only passes both the video and audio signal onto the end points, i.e takes the signal from your apple TV and outputs them onto your TV. It does not split the video and audio stream and send the audio to your home theater speakers. So make sure you plug your hdmi and optical out into the same set of input ports. On most Sony receivers, this device is under the Blue Ray class of input, where it takes video from the hdmi and the audio from the optical. If you have them on two separate class, say, HDMI to the DVD in, and optical in to the blue ray, then certainly when you set your receiver to DVD, you get video and audio on your TV speakers. And when you set your receiver to blue ray, you only get audio but not video.

Similar Messages

Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls

any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !

Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.

Apple A/V-cable not working with 3GS 3.1.3

Apple A/V-cable not working with 3GS 3.1.3
What can I say: the cable is shown in the general settings but the iPod won't play.

Had to do with the TV input

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

Itunes not working with Vista Home Premium 32-bit

Itumes 10.6.3 version will not work with Vista Home Premium. I have a 32-bit operating system. I'm not sure what to do next. It appears in trying to update it deleted the old itumes, as I can't find a copy of it when I search the computer.

Then I installed Quicktime on its own - still get the same error 'Quicktime has stopped working;
Okay. That will be the source of the iTunes problem. (Without a properly working QuickTime, iTunes won't work correctly.)
Checking on things that can cause QuickTime launch errors now.
Have you at any stage installed any Codec Packs, any copies of the programs QT Alternative, QT Lite or Storm Codec, or any media converter programs that can convert files into QuickTime readable formats?
(I'm checking on these things because depending on the versions of the programs/codec-packs, these can install earlier versions of QuickTime componentry on a PC, which can interfere with the running of a higher version of QuickTime.)

$80 Apple in-ear headphones not working with iPhone 4

I spent $80 on a pair of in ear headphones and they do not work with iPhone 4. I can listen to music and talk but the volume controls are completely nonfunctional. So I used them on my friends 3GS and they work fine. How can Apple come out with a new phone that wont work with their own products? I used to love Apple until this F@#$ing iPhone 4 came out.

According to Apple, they should work with the 4... http://store.apple.com/us/product/MA850G/A?fnode=MTY1NDA1MA&mco=MTM3NTM0Mjg
Are they plugged in to your iPhone all the way?

Apple TV gen 3 not working with Linksys EA6700

Hello, I have Apple TV 3 with 5.3 Firmware connecting to Linksys EA6700 is so far impossible. It has always worked with a Technicolour 582n. No problems. But with this Linksys EA6700 Smart router no result of connecting. This is wireless as well with Cable. It stays stuck on Activation as well Setting date and Time. Which results into only Computers and Settings. Been in contact with Linksys. They don't want to burn their fingers on it, so no solution. Before I was able to use it with Firmware 5.02 but now I have tried to restore this and it is not accepting this and gives a fault. Did a wireless restore, did a cable restore, did a micro usb restore. Nothing, nix, nada, horror, horror ! Why is it that Apple TV is NOT working with Linksys routers ? After so many updates from Apple still no inclusion. What is the problem ? Tried also to set DNS server to 8.8.8.8 Disconnected everything, on and off, you name it. It can't be that difficult is it ? Why can't we manually activate and set the time and date by hand ? Something is wrong here. Does Apple refuse to talk to Linksys about this or do they just hate Linksys routers ? Further Linksys EA6700 is working great with every other hardware. Easy installation. No problem with Switches, Computers, Laptops, Ipads, Iphones, Android, ................... But not with Apple TV !

Nobody ?

Itunes not working with 64 bit operating system

Does anybody know how 2 or when itunes will work or can work with a 64 bit system. I had no problems when I first downloaded itunes on my computer about 4 months ago. Then I updated itunes and it doesnt install properly. On the disclaimer it says it will only work with a 32 bit or less. I've lost my entire itunes library. atleast its still in my ipod but i cant burn any songs either. Does anybody know how 2 fix this?

If you are referring to Vista Support, It may be after the new year before it fully supports vista. I have not upgraded to vista yet but I was thinking about it!

Captivate 7.1 not working with latest Android operating system

Courses created with Captivate 7.0.1.237 are not working on tablets with Android's latest operating system - KitKat. The play arrow in the middle of the screen remains onscreen throughout the course. In some cases, it stops the course and buttons become inactive. In other cases, the course plays, but the arrow is still there and the sound is gone. The courses work with an older operating system. We are using the latest Chrome browser. Is there a fix? (Other than publishing with Captivate 8 - courses are on the client's LMS and we do not want to have to replace them.)
Thanks

Chrome version 36 has some issues with captivate html5 output. Please find the following workaround if you are using Chrome.
http://blogs.adobe.com/captivate/2014/07/update-on-captivate-html-5-content-playback-issue -in-google-chrome-browser.html

Can I connect my iMac's iTunes library via wi-fi to my Blu-Ray player so I can listen to the music on my computer with my home theater system?

My music library is on my iMac, located in a different room of the house than my home theater system with a decent Denon receiver and good Infinity towers. I have an iPod connector to the Denon which I can use, but the iPod has a limited library of songs, so I would like to somehow access my iMac music library and be able to play it through the home theater system. Hard wiring the components is out of the question due to length of run through several rooms of the house, no basement and cathedral ceilings. I already have my iMac and my Panasonic Blu-Ray player both connected to my wi-fi, and it seems there should be a way to connect both of them using the wi-fi. The blu-ray player is DLNA, but the Mac isn't, so that is out of the question. Is there any other way to get these components to talk to each other over wi-fi?

There is a DLNA media server called MediaLink that is designed for use with the Play Station 3. It is not advertised as working with other DLNA clients but it usually will. I use it to stream audio, video and pictures to a WDTV media player in my bedroom. Works great, even supports iTunes playlists. I believe it still has a free trial period so you can see if it works with your player.

Sony Home Theater System DAV-HDX275

I just bought a home theater system and I am wonder how to connect it to get the best sound out of it while watching blue ray movies or just plain old TV? There is a HDMI outputy on the back and a digital inout on the back. Whic one should I use and get th best results
Thanks!!!

The DAV-BC50 appears to have only stereo analog input ( pair of L/R RCA jacks). You need a cable with a stereo miniplug on one end and 2 RCA jacks on the other. The soundcard should be set to 2-speaker mode. The DAV-BC50 does not have any way accept discrete multichannel from the soundcard nor to accept encoded AC3/DTS from the soundcard. You can use Dolby Prologic II to get all your speakers going, but you should not use processing when playing DirectSound3D games because it will dilute the intended 3D soundfield produced from 2 speakers.
-Dave
[email protected] Edited by dwh on 04-25-2005 04:56 PM

Networking with LG Home Theater System

I have an LG 47LW5600 TV and LHB976 Home Theater system. These are connected wirelessly via a Cisco Router to my Dell Laptop running Vista. I can readily access all my shared media files on the PC and display them on the TV. My problem now is that I have just bought a new IMAC running OSX 10.7.2 that is on the same network and none of the folders that I have set up to share on the IMAC will open on the TV/HT system. All of these folders are correctly listed on the TV when I go to the ‘select device or server’ page, so the TV is seeing them OK , but none of them will open. All I get is a message saying ‘a network error occurred’ with an option to either return to the home page or the server list. I have run a network check on the IMAC and no problems were found. Anybody out there had similar issues with this LG/IMAC combination? Would really appreciate some help with this as I intend to gradually move all my entertainment media to the IMAC from the Dell.

I believethe problem is your LG TV is probably looking for devices that support DLNA (Digital Living Network Alliance) in order to stream or view folders, images, etc on the TV.
One easy way to add this capability to your Mac is to use a streaming media server app on your Mac.
I've reviewed the one from ElGato, which is linked above.
Let us know if that helps.
Tom

IPod touch not working with Sony clock radio.

iPod 4th gen won't play music through new Sony clock radio. It charges but won't play or control music. Works with 2 iPhones tested but not touch. Yes I am using the correct adapters, universal for iPod and the different ones for phones.

Does Sony say it will work with yur model iPod and iOS?
Do the phones have the same iOS?
Is the iPod fully seated in the dock?
Does the iPod sync and charge OK?
- Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
Other uses have reported problems with Sony docks. Use the communities search feature in the upper right and search for Sony. Use the advance search to restrict search to the iPod touch forum

External Optical Drive not working with iMac

I have a memorex external drive that I have been using to install Windows 7 with boot camp and have successfully used it on 2 mac-mini's. I am not trying to install Windows 7 boot camp on an iMac that has a broken internal optical drive but the external will not run.
I have tried:
- Startup Utility: Can see the external in there.
- External shows up on desktop with Windows 7
- External shows up in disk utility
- Windows shows up in startup menu with holding down Option.
I see iMac SSD Drive, Recovery HD Drive , Windows CD , EFI Boot cd as options.
If I select Windows it takes me to a black screen that says it doesnt see a boot CD clicking on EFI boot does nothing.
Anyone have any possible solutions into getting this to work?

Valen85 wrote:
I have a memorex external drive that I have been using to install Windows 7 with boot camp and have successfully used it on 2 mac-mini's.
Mac Minis without built-in Optical drives behave differently than iMacs with built-in drives for boot ability,
I am not trying to install Windows 7 boot camp on an iMac that has a broken internal optical drive but the external will not run.
I see iMac SSD Drive, Recovery HD Drive , Windows CD , EFI Boot cd as options.
If I select Windows it takes me to a black screen that says it doesnt see a boot CD clicking on EFI boot does nothing.
This is confusing. If you have the external Optical Drive (Memorex) connected via USB to the iMac and insert a Windows 7+ DVD in it, the Apple Bootmanager will see OSX, Recovery HD, Windows (if already installed on the iMac's internal drive) and possibly Windows and EFI boot from the DVD.
The Windows and EFI Boot will not work if you try to boot the iMac from the external. Test this from the internal Optical drive as well. If your iMac is a UEFI Mac (2013+) it will let you boot from the DVD directly (without Bootcamp).
Bootcamp Assistant will refuse to let you use the external Optical drive, if you try use it to install Windows. BCA only works with internal Optical drives as far as Windows installation is concerned, on Macs that have a built-in optical drive. The exceptions to this rule are 2012 Macs and some 2011 models.

Bravia Sync does not work with Sony Bravia XBR-55X900B and BDV-N8100W Bluray 3D Home Theatre System.

Bravia Sync does not function with my Sony Bravia XBR-55X900B and Sony BDV-N8100W Bluray 3D Home Theatre System. The Sony Bravia XBR-55X900B does not list the Sony BDV-N8100W on the Bravia Sync device list. Does anyone have an explanation or solution for this?

Please use a component cable. With either RCA or optical for audio. That is the quickest fix. For current HDMI issues.
1.7 upgrade has been known to fix most of the HDMI issues. Verizon is working diligently to roll out img 1.7.
Javier
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

Apple TV Optical Soundoutput not working with Sony Home Theater System

Similar Messages

Maybe you are looking for