Apple TV Picture pixulated or goes blank since iTunes update...

I have an AppleTV and my iTunes on the SAME router, GIG Ethernet connection, since the update the picture on ALL my movies is pixulated or goes blank. I see the progress bar on the AppleTV turn white as it loads the stream well ahead of the place where the movie plays. How can I get the older version of iTunes?
ANy Ideas what is wrong?
WARNING DO NOT UPGRADE YOUR ITUNES!!!!!

Not sure why you are saying it's not the upgrade. Nothing is changed in my set up and its been working great for a year. There seems to be a different way iTunes streams to Apple TV and that is the issue. I no longer see my library when my apple TV is on Wifi and I did before.

Similar Messages

My macbook boots up get a screen picture then screen goes blank, when boots up I get the sound then a screen then screen goes black is this a battery problem or something else?

my macbook boots up, I get a screen picture then screen goes blank...I get the start up sound, then a picture, then the screen goes blank but computer is still on..does anyone know what the problem is...do I need a new battery or am i just screwed.

Hello nosaint1961,
It sounds like you are unable to successfully boot your computer to your desktop. I would use the troubleshooting from the following article to help troubleshoot what is happening named:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thank you for using Apple Support Communities.
All the very best,
Sterling

Can't see my documents/pictures on all my devises since I update software to SO8

can't see my documents/pictures on all my devises since I update software to SO8- Apple said the drivers are not updated on my Mac - that an update will coming soon to fix this problem - now I see an update to OS X Yosemite - but for the reviews/comments seems like this is not going to fix the problem it looks like is going to make it worse - seems like better not update it - I have problems already - any comments from anyone?

Mac Pros don't run Classic operating systems. Mac OS X 10.8 is Mountain Lion. See options for data recovery here: http://discussions.apple.com/docs/DOC-1689

Since iTunes update my PC will not see other devices keep getting message The procedure entry point sqlite 3_wal_checkpoint could not be located in the dynamic link library SQLite 3.dll, how do I get my other devices to be found?

Since iTunes updated my PC my other devices are not seen and I keep getting message "The procedure entry point sqlite 3_wal_checkpoint could not be located in the dynamic link library SQLite 3.dll", how do I get my other devices to be found? or do I have to remove all Apple software.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

HT203167 I have a "!" next to most of my songs and it can not locate it. Is there anything I can do? It has been since ITunes updated.

Since ITunes updated, most of my songs in the library have a "!" next to it and they are unable to be located. They are not in my recycle bin and I do not have a back-up. Is there anything I can do to get them back in my library? They are not purchased, so I can't get them back from what I have read.

Is the media still on the computer?
If it is, simply point iTunes to where the media is.
If it is not and the content was acquired from iTunes, simply download it again.

Iphone 6 lost connection error when PC READS the phone since iTunes update. t

Lost connection error when trying to sync iphone 6 since iTunes update. Has anyone else had this issue its VERY FRUSTRATING, when the PC reads the phone?
Message was edited by: marcityme

Get a replacement nanoSIM from Rogers and see if this helps.

No home sharing on Apple TV (gen1) since itunes update 10.5.2.11

I was hoping that this issue would also be resolved with the latest apple tv update that brought the tv items back to apple tv, but no such luck.
I can not get the apple tvs (we have two) to connect with my computer since I installed the latest itunes update about 2 weeks ago. We had no problem connecting for a year prior to that!
I have done the following several times over and in various combinations, with no result:
- latest updates on everything
- made sure the itune logins/accounts are the same on computer and apple tvs
- unplugged, restarted the apple TVs etc
- factory reset
- made sure homesharing is turned on in both at the same time etc
- tuned home sharing on and off on the computer as well as the apple tvs, then restarted both etc
- restarted bonjour
- reset modem and router
- restarted my computer
- turned off firewalls etc
We have NO problem connecting to anything else and my husband's computer (windows 7, 32-bit,) that has the previous version of itunes, still connects just fine to both apple TVs. Just not this one (Windows 7, 64-bit), which is the one I have all my stuff on and (used to) use on a daily basis to have audible content all over the house. What else can I try?
Incidently, the little icon on the bottom right of itunes that used to let me chose the speakers (computer, apple tv1 or apple tv2) is gone also, while it is still there on the computer that has the version before the latest update.
Is there a way to roll back the latest update?
Some help would be greatly appreciated!

The ATV gen 1 is not home-sharing aware. Have you tried to remove the iTunes library from your ATV and then reconnect, then go to iTunes > devices > ATV and enter the digits that appear on your ATV screen.

HT202157 My apple tv 3 doesnt work at all since latest update, how can I restore when it wont even turn on?

Having trouble with my apple tv since latest update, it has died and can't turn on as it doesn't recognise anything, what can I do?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

App store goes blank after io6 update on 4s

app stores goes blank white after io6 update on 4s

it could be that youll have to delete and reeneter your email onto it.
go to settings>mail,contacts,calanders>tap on your email.
scroll all the way down. tap the big red delete button.
go back into mail contacts and calanders and tap on add account and re add it.

Scanner/camera wizard popup no longer shows up since iTunes update 9.0.2.25

I used to get the scanner/ camera wizard popup when first plugging in my ipod. However, after latest iTunes update, I do not get it anymore. Can anyone tell me where I can find it?
My ipod shows up fine in the itunes window. It does NOT show up at all on the list of drives in My Computer (even after going through drive manager).

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
I would first remove and reinstall all the Apple software by:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
The drivers in windows that sees the iPod as a camera is different that the drivers that see the iPod in iTunes.

ATV not custom syncing ever since iTunes update??

Alright- I've had a few problems with my ATV here and there- but for the most part, I've figured them out without too much headache. Now with the last iTunes update (8.0) it is telling me that I may have a port glitch within my firewall software for the AppleTV on my cpu... So what's happening is when my cpu is on, my ATV will automatically sync as usual which is great- I can run everything fine- no problems; However, if I try to custom sync any content- add or remove- it will give me the error message I described above. I'm not necessarily the best at networking glitches... but I checked my Network Utility and did a port scan on my IP and it said that the port that the AppleTV was looking for was open... any clues on the best way of solving this? Should I try a factory restart to reset this issue or will this not be the right step to solve this?
Any help will be greatly appreciated! Thanks in advance... =-)
Steve

Thank you Winston for your quick reply =-)
Well, I am set up for file sharing with my wife's MacBook... but it is rarely ever on, and requires user login to connect the two... no remote access or anything running. We do have a PC in the house that shares the network- but no file sharing going on. As far as the 3rd party apps, everything on our cpu is essentially stock off the shelf- no virus software or other network interferences- my cpu is tied to my router via ethernet cable and my other 2 cpu's and AppleTV are protected via WEP on my home network. The only thing I have changed on my cpu is the location of my iTunes Library to a TB external hard drive for storage purposes. Otherwise everything is as it was when it was taken off of the shelf. So I'm not sure if a 3rd party device is interfering here since my AppleTV is otherwise working fine (renting movies occasionally, youTube, etc.), if I did have any problems on that front- I'd think maybe it messed up the settings with my router, but I don't think that is the case here. I hope this gives you a little more of an idea of the network I have... any direction you can give me is very much appreciated.
Thanks again in advance,
Steve

My ipad will not connect to wifi or itunes account since itunes update. Any ideas?

Since running the itunes update which failed, followed advice on here for deleting completely and reinstalling, which was successful. However, now cannot connect my ipad to wifi or itunes, will not accept account and password details. Any suggestions?

You're on a PC?
Go into the control panel, add/remove programs. Uninstall iTUnes, Apple mobile device service, Apple Application Support. Then redownload and reinstall iTunes and see if that fixes it.
If not there are more indepth things you can do.

Apple Application Support was not found on new itunes update.

I have unstalled and installed the newest itunes update about 10 times now. I still get (in itunes and itunes helper) "Apple Application Support was not found. Apple Application Suport is required to run itunes". Please uninstall itunes, then install itunes again. Error 2 (Windows error 2)".
Can someone please help ! ! !
Desperate Dave

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2

EMusic Download Manager Won't Launch since iTunes Update.

Hi,
Since updating to iTunes 7.3.1 my eMusic Download Manager no longer launches.
I booted from a FireWire disk which doesn't have the iTunes and QuickTime updates, but otherwise is an exact clone and it launched from there.
Any of you guys hit that problem?
Thanks in advance for any help:-)
iMac Mac OS X (10.4.10) Intel, 20-inch, 2.33GHz

Well, I just checked. Download Manager launched appropriately for me. I have all the latest updates.
One thought, what browser are you using? I know Safari got a bump recently. It is possible if you downloaded that at the same time as the iTunes update, if may actually be the problem.
If my previous suggestion didn't work, try this. When you click on "Download All" in emusic, if the Download Manager doesn't launch, a small file with a numeric name and the file extension .emp should still download. Control-click on the file and make sure that files of that type are set to be opened by Download Manager.
You might also try consulting the emusic folks.
Best of luck

Since iTunes Update to 10.3.1.55 cannot put content on devices......

Hi,
As with mst people I updated iTunes. Since the update our devices do not sync, back up and we cannot put any music or content.The devices are iPhone 3GS, iPhone 4 and an iPad. We are running Windows 7 and never had any problems with previous versions.
Has anybody had and overcome a similar problem? I have run the 'check for updates' in iTunes and all it says is we are running the latest version.
Any help will be appreciated.

im having the same issue. decided i must have a corrupt track or something, but I seem to be able to sync all purchased music (must be ticked!) but nothing else. That is on my 3g. on my 4, i restored the phone and since my backup wasnt working either it wiped my phone. i have music on it again but Im pretty certain if i stimualate a sync on it then it will wipe it again.
anybody else having a problem with 'no content' after sync?

Apple TV Picture pixulated or goes blank since iTunes update...

Similar Messages

Maybe you are looking for