Apple TV playing up

My Apple TV has started to mess up starting today, it's lost all of the channels apart from the settings and the computers channels, I HAVE TRIED the plug into iTunes method and it didn't work, I then unplugged it from the way and the Television and then plugged it back in after 20 minutes, it let me sign into iTunes and iCloud and then got all of it's channels back, but after watching some videos on YouTube the search feature stopped working, then the whole app collapsed so I put it to sleep but when I woke it back up again all of the channels had disappeared AGAIN.
I have used the restore function on the Apple TV, and the reset feature.
I have tried the iTunes restore method.
My time zone is: London (Where I live)
My Regional Format is: United Kingdom, where it should be.
I have disconnected from the network and connected again.
I CANNOT: Restart the router it is connected to or join any other internet access points as I live in shared accommodation and there is no access to the router, or any other access points.
I do not know what else I can do apart from take it into an iStore, but this is really starting to annoy me as I expect the product to work flawlessly as it has been doing before. Please help me get this back online as it is very annoying to say the least and I would like it if the products I have spent so much money on would work as intended.

You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
In addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Similar Messages

  • Apple TV Playing my music "slow"

    Hey there smart community. OK, my subject pretty much says it all but I'll explain anyway....
    At first, my Apple TV played my music perfectly with no problems (running through my Mac Pro - direct ethernet). I switched it over to my iMac on a wireless network and my audio is playing... but very slow and down a few tones... like holding your finger on a vinyl record.
    Is this caused by my wireless not being powerful enough? I switched to the Time Capsule Airport connection and it's still the same.
    I'd like some insight to a particular setting I may have screwed up, or , well, anything
    Thanks in advance!!
    HumanV3

    Bizarre.
    Wireless issues would lead to stuttering/choppy music not slow playback, and if it worked over ethernet it should over wireless too.
    Assume you've unplugged the AppleTV and restarted it.
    The only thing I can think of that could cause this is if you've encoded audio with somewhat unusual parameters which AppleTv isn't expecting eg high sampling frequency which gets played back at a lower one making the audio slower. Can't see why this would have worked over ethernet though so seems unlikely.
    Is all audio affected or just some?
    If problem persists I woud have to guess that it's software corruption and a 'factory restore' might be needed though it will wipe all content and settings on the unit.

  • I can not get apple air play to work. I have down loaded three diffrent apps looking for a solution none of them were the right one. I spent over $10 in these apps. Can I get a refund. Do I need apple tv to run air play?

    I can not get apple air play to run from my iTunes to my WiFi reciever.
    I have spent money on 3 different apps looking for a solution.
    None have worked. Can I get a refund?
    Do I need apple Tv to work Air Play?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • Why won't my Apple TV play sound on movies but Why won't my Apple TV play sound on movies but will my TV shows and music?will my TV shows and music?

    Why won't my Apple TV play sound on movies but will my TV shows and music?

    no chain is stronger then it's weakest link if you are downloading from a source which can't keep up it don't matter how fast your internet connection is

  • Why won't apple tv play some youtube videos it used to play?

    Why won't apple tv play some youtube videos it used to play?

    Ah I see what you mean. Do these specs help:
    Format : MPEG-4
    Format profile : Base Media / Version 2
    Codec ID : mp42
    File size : 525 MiB
    Duration : 20mn 59s
    Overall bit rate : 3 494 Kbps
    Encoded date : UTC 2009-08-19 08:38:05
    Tagged date : UTC 2009-08-19 08:38:35
    Video
    ID : 1
    Format : AVC
    Format/Info : Advanced Video Codec
    Format profile : [email protected]
    Format settings, CABAC : Yes
    Format settings, ReFrames : 5 frames
    Codec ID : avc1
    Codec ID/Info : Advanced Video Coding
    Duration : 20mn 59s
    Bit rate mode : Variable
    Bit rate : 3 333 Kbps
    Width : 1 280 pixels
    Height : 720 pixels
    Display aspect ratio : 16/9
    Frame rate mode : Variable
    Frame rate : 23.976 fps
    Minimum frame rate : 23.810 fps
    Maximum frame rate : 24.390 fps
    Resolution : 24 bits
    Colorimetry : 4:2:0
    Scan type : Progressive
    Bits/(Pixel*Frame) : 0.151
    Stream size : 501 MiB (95%)
    Writing library : x264 core 66 r1114 a933a3e
    Encoding settings : cabac=1 / ref=5 / deblock=1:-1:-1 / analyse=0x3:0x113 / me=umh / subme=7 / psy_rd=1.0:0.0 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chromaqpoffset=-2 / threads=6 / nr=0 / decimate=1 / mbaff=0 / bframes=3 / b_pyramid=1 / b_adapt=1 / b_bias=0 / direct=3 / wpredb=1 / keyint=250 / keyint_min=25 / scenecut=40(pre) / rc=2pass / bitrate=3333 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.10
    Language : English
    Encoded date : UTC 2009-08-19 08:38:03
    Tagged date : UTC 2009-08-19 08:38:35
    Audio
    ID : 2
    Format : AAC
    Format/Info : Advanced Audio Codec
    Format version : Version 4
    Format profile : LC
    Format settings, SBR : No
    Codec ID : 40
    Duration : 20mn 59s
    Bit rate mode : Constant
    Bit rate : 156 Kbps
    Nominal bit rate : 160 Kbps
    Channel(s) : 2 channels
    Channel positions : L R
    Sampling rate : 48.0 KHz
    Resolution : 16 bits
    Stream size : 23.4 MiB (4%)

  • How can I make my Apple tv play the music I am listening on my iMac?

    How can I make my Apple tv play the  music I am listening on my iMac? The idea is having same music in two rooms.

    Welcome to the Apple Community.
    In the lower RH corner of iTunes is the Airplay device selctor.
    Click on it, select multiple speakers and check the computer and Apple TV from the list.

  • Can apple tv play ...

    can apple tv play an h.264 movie with:
    ( a little more than 5Mbps bitrate(but less than 5.5),
    high profile, which can be played with QT on Mac OS X without any 3rd party add-ons,
    and subtitles (QT and iTunes can recognize the subtitle track, as a 'subtitle')
    )?

    A DVD converted into iTunes and run at maximum bitrate on the AppleTV will look pretty much the same as it being played in your DVD player. No increase in resolution. The AppleTV will not upscale the image like a high-end receiver or specific DVD player would.

  • Apple TV plays from iPhone for 30 seconds

    Apple TV plays music from iPhone for about 30 seconds.  Then Air Play switches from Apple TV to iPhone mode.  This worked well previously without this type of problem.

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • HT2463 Why does my apple tv play one song then stops streaming?

    Why does my apple tv play one song then stops streaming?

    Make sure all of your songs have a checkmark next to the song title. There are small blue boxes that need to be checked for songs to play consecutively.
    If the library is unchecked, you can easily recheck things by clicking on a song, going to the top line selecting Edit>Select All, then right clicking on the selection and choosing "Check Selection".

  • New Apple TV plays everything high speed

    Why does my new out of the box Apple TV play everything fast forward?

    I wondered that, can't see another reason unless the video is encoded oddly or with a very low fps and is being played at 25/30 fps somehow.
    AC

  • Apple tv plays only 1 number

    apple tv plays only 1 number

    Don't have the movie but I was surprised when you go to play from the cloud you go directly to Extras menu - nice to have but many people just want to play the main movie and have no interest in extras, and an extra step to play the movie.
    In this case it sounds like a bug with the extras menu for Planes.
    Send feedback:
    Apple - Apple TV - Feedback

  • If i click at a song on my computer does apple tv play the song? or do i have to sellect a song on the tv?

    if i click at a song on my computer does apple tv play the song? or do i have to sellect a song on the tv?
    So i could sit infront of my pc and don't have to move to the tv?

    that depend on what you use as speaker in itunes on the pc
    if you choose the atv as remote / airplay speaker the atv will play

  • Does the Apple TV play netflix continuously like my xbox, or do I have to select a new episode like with my wii?

    Does the Apple TV play netflix continuously like my xbox, or do I have to select a new episode like with the wii?

    Welcome to the Apple Community Jmiller.
    An episode at a time.

  • HT201263 Apple Air Play

    My Mac Book pro used to have Apple Air Play but after the latest update it is gone.  Can anyone advise as to how I can get it back.  I even tried to reinstall Mountain Lion and nothing is fixed

    No.
    http://support.apple.com/kb/ht4437

  • Why does apple tv play my photos randomly in screen saver mode when random is not selected

    why does apple tv2 play my photos randomly in screen saver mode when random is not selected?

    Thanks for that.
    Random is not selected in transition or anywhere else. Unless I am missing something in the settings.
    So why is it playing my photos ramdomly in screen saver mode ?

  • Possibility of Apple TV playing one Itunes Library while the computer plays a different library at the same time (Mac)

    The Apple TV is for my son's room to watch his videos, listen to music, etc. off his iTunes library I made for him on my Mac.  I want to be able to listen to my own library at the same time he has his. Apple TV only recognizes the current library open; unless I'm doing something wrong or the stars haven't aligned for me yet, is there a way to do this? I can't run two iTunes at the same time (wish I could). 
    *Note- to teach my son about computers, I bought an old green iMac which will be for his learning venture.  The iMac however does not have wifi (at least not yet).  Perhaps something for you Mac professionals can use to help me whip up a good setup, unfortunately the iMac is slow, not enough HD space, so I don't have the funds right now to open it up and do what can be done.  (If this helps)

    Hi All,
    Same issue here. Just upgraded (?) from the previous version of Apple TV, to the new Apple TV2. Like others here, my main problems seem to be with unreliable streaming from iTunes 10 on my PowerMac (Quad G5, Leopard OSX).
    My original AppleTV had no issues w/the wireless network, or synching w/my PowerMac.
    The network connection from the ATV2 are fine, and have no issues accessing the Apple Store (for movies, TV shows), or accessing Netflix. The access to the internet from my ATV2 is quite robust.
    My problems are with keeping a constant, reliable wireless connection to my PowerMac, via an Airport Extreme wireless router.
    I have tried multiple restarts, reboots, reset ATV2 to original settings, tried different wireless channels on the Airport Extreme, verified I have Home Sharing properly enabled in iTunes,etc, but no luck so far.
    What I'm seeing is when I access my iTunes on my computer, I can see my library, and then if I start to "shuffle songs" I may get 1 to 3 songs to play fine, but then the music stops, and I can no longer access the music/movies/etc in iTunes any longer. When I then go to my PowerMac, it has lost most bars of signal strength on the wireless network (although all other devices show strong signal strength), and I have to Turn AirPort Off, then Turn AirPort On and I then am reconnected to the wireless network with good signal.
    I then go back to the ATV2, connect to my iTunes, start my music, and then 1-2 songs later it again stops playing, and I go through this all over again.
    It seems as though there is something on the wireless network between the ATV2 and my PowerMac that causes it to lose connection, and I have to manually start again. The problem is that the connection is not robust, and only lasts a few minutes.
    Hope this gets solved soon.
    Regards
    Tom

Maybe you are looking for

  • How to find out if LOB is stored "IN ROW"?

    Hi, If I have a compressed secuerfile LOB defined as "enable storage in row", is there any way to find out how many LOBs are stored in the table segment and how many where moved "out" in the lobsegment due to exceeding the approx. 4000 byte limit? If

  • Syslinux resolution help

    Problem: Trying to get a graphical menu with a background image at a 1920x1080 resolution, but nothing seems to be working as I get black borders around the screen. It's just like BIOS and won't scale properly probably because it's a 16:9 aspect rati

  • ITunes could not connect... because it is locked with a passcode

    _+The Error:+_ iTunes could not connect to the iPhone "t3l01v's iPhone" because it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes. _+The Issue+_ I just installed the 3.0 software. The iTunes st

  • Migration from CoD to CRM.

    Hi Experts, I need to migrate Opportunity data from CoD to CRM on premise for my client.Could you please let me know if the table structure in CoD is same as that of CRM on premise? Any tips on the migration strategy would also be appreciated. Regard

  • SCCM 2012 - Image capture error

    Hi All, Need an help, I created a capture .iso image file in SCCM and ran the same on the reference machine. But i got an error message stating "Task sequence image capture wizard has failed with the error code (0x800704CF)". But the problem is i tri