Apple TV plays from iPhone for 30 seconds

Apple TV plays music from iPhone for about 30 seconds.  Then Air Play switches from Apple TV to iPhone mode.  This worked well previously without this type of problem.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

Similar Messages

  • Can i plug Ipad 2 from Iphone for internet (3G ) ?

    Can i wire/hook IPad2 w/no 3G from Iphone for internet *google etc* (3g) ?
    Just curious.
    Thanks!
    Jake

    If you are in Starbucks etc then you should be able to use their wifi network on your iPad without needing the iPhone. Using the iPhone as a hotspot will use the phone's 3G service (and therefore some of your 3G data allowance), and your iPad will see the phone as a wifi network - but yes (assuming that your phone carrier supports it) you will be able to access the internet on your iPad via the iPhone.
    There is a bit of info about personal hotspot towards the bottom of this page http://www.apple.com/iphone/features/more-features.html

  • I cannot access Apple Store app from iPhone 4

    I cannot access Apple Store app from iPhone 4.
    We're sorry, the Apple Store app is currently not supported in the country associated with your Apple ID.
    I am in USA and my correct address is on my account.

    you can't, but you can simply ignore it. but if you REALLY want to delete it, call apple customer support to ask for a deletion. though, you'll need the password and security questions of the old account.
    you can manage your apple ID's at: https://appleid.apple.com/

  • Im looking for apple to donate some iphones for the youth work programme

       looking for apple to donate some iphones for the youth work programme in the base youth centre to support the productity and effective rescouring of the team to enable them to increases there contact time with young people,

    Good luck with that.
    You're not talking to Apple. This forum is for technical support for using an iPhone in an enterprise environment.

  • 2 Apple IDs on my iPhone for the AppStore

    The Apple ID within my iPhone's Settings for App Store is different than that Apple ID that is brought up with trying to Update appls.  How do I make them consistent?  I have tried turning the power off.
    This is also happening on my iPad1.  I can't get an old Apple ID to be disassociated from my AppStore despite changing it in Settings.

    Did you change the account info in iTunes/Store menu on your computer as well?
    About iTunes Store authorization and deauthorization

  • I lost my Apple ID changing from iPhone 4 to 5S.

    I uploaded from Itunes my iPhone 4 complete information to my new iPhone 5s. Results lost my Apple ID.   I created a new Apple ID and want to delete the old. How do I delete an old Apple ID?
    Thank you very much.

    you can't, but you can simply ignore it. but if you REALLY want to delete it, call apple customer support to ask for a deletion. though, you'll need the password and security questions of the old account.
    you can manage your apple ID's at: https://appleid.apple.com/

  • How can I delete or remove my apple account ID from iPhone i want to sell or give out as a gift?

    how can I delete or remove my apple account ID from an iPhone I want to sell or give out as a gift?

    You didn't see this bit?
    "Your content won't be deleted from iCloud when you erase your device."
    You only lose iCloud data from other devices if you manually delete the data. If you Erase all content and data, you keep iCloud data elsewhere.

  • HT1689 Cannot remove credit card info from iPhone for to use my iTunes money I redeemed already

    Please help need to purchase another app & I tryed calling twice no help there's no none option from iPhone 4

    http://support.apple.com/kb/ht2534

  • Can apple exchange my 16gb iphone for 32gb if i pay the difference?

    I had a 16gb iphone for Christmas, I was wondering if apple would let me exchange for the 32gb if i pay the difference its still in the original box with the cellophane still on

    Maybe if you start with Merry Christmas.
    Allan

  • Mp3 does not plays from beginning for iPhone 4

    Hi,
    I have iPhone 4.3 (8F190) 04.10.01
    All the mp3 i sync with the iPhone it never plays form begining, the begining will play somewhere in middle also the artwork never show correctly when the mp3 is playing. The same happens with the mp3 files which I sync as Audiobooks.
    Please help how to sort this.
    Thanks

    Maker sure 'Optimized for network use' (fast-start).
    If you have Quicktime 7 Pro... you can fix it in Quicktime 7 Pro by doing a 'save as' in the MENU... FILE SAVE AS option. You can also do this in MPEG-Streamclip (free app.)
    Open video in MPEG-Streamclip...
    Menu...File...Save As...
    Doing this you won't have to re-encode the video again and the fast-start will be added back to the video.
    MPEG-Streamclip web page... http://www.squared5.com

  • Does Apple accept ideas from others for updates on the iPhone? I think it would be cool to have an update where we can change the font on our phone

    It would be awesome if we could personalize our phone!

    No, they don't. If you wish to, you can provide feedback at Apple Feedback.

  • How do I sort music in iTunes when played from iPhone?

    Okay, so I've been using my iPhone to basically carry music around and play it on different computers, right?  Just turn on manual sync and then I can play music on iTunes straight from my music library without needing to have it in my computer's iTunes library.  The problem is that all the music is out of order, and the column headers at the top that should be clickable to choose how you want the music to be sorted are all greyed out and unclickable.  What I want is for my music to be sorted by Album Title followed by Track Number.  Used to be that it was sorted by Artist then Track Number, which usually ended up okay as long as the album only had one artist.  But recently, iTunes just completely arbitrarily changed itself to sorting by Song Title, which is screwing everything up.  Since the sorting order can obviously be changed, how do I get iTunes to sort the music from my iPhone in a sensible fashion?

    Here's an article about synching (moving your music) with a new computer: http://support.apple.com/kb/HT4527

  • Apple headset unpairs from iPhone after charging in dock

    After the first charge after buying the headset, it auto-paired to my iPhone when charging in the dock and worked properly afterwards. The next time I charged both in the dock, the headset would not pair to the iPhone afterward. The only way to re-pair was to turn off bluetooth on the phone, power off the headset, turn bluetooth back on, and power up the headset. Then the next time I charged them in the dock, same problem. I took my headset back to an Apple store thinking it was faulty, but the Genius explained that he has exactly the same behavior with his and it's just a fact of life with the Apple BT headset. My husband was given one for Xmas so I tried it out with my iPhone and, as expected, same problem. I'm surprised not more people are talking about this in these forums. Having to go through a annoying 4-step process to re-pair the headset after charging is absurd.
    Message was edited by: disconnekt

    I was having the same problem, but I discovered a fix! I am using an iPhone with 1.1.3 firmware. Okay here goes.
    1. Turn off Bluetooth on the iPhone and turn off the headset as well.
    2. Plug in the iPhone and the headset in the dock. Make sure that the dock is plugged in to your computer via USB. Bluetooth should come on automatically and the headset should pair as well, but the bluetooth symbol will be grayed out, i.e. not connected.
    3. Remove the bluetooth headset from the dock.
    4. Unpair the headset from the iPhone via Settings - General - Bluetooth. Turn off bluetooth once you are done unpairing.
    5. Turn off the headset.
    6. While the iPhone is in the dock, reboot the iPhone.
    7. Once the iPhone boots up, plug in the headset in the dock.
    Voila... the bluetooth should come on automatically and the headset should pair as well, but this time the bluetooth symbol will be lit up, i.e. bluetooth connected.
    Not done yet... remove the headset from the dock. The bluetooth symbol on the iPhone will go off, i.e. grayed out. Wait a few seconds and hit the button on the headset once and the bluetooth on the iPhone will reactivate and connect to your headset.
    Hope this helps!
    Message was edited by: KingofMac

  • Sync not updating "plays" from iPhone in 10.5.3

    I recently upgraded from an iPhone 3G to a 4S, and also to 10.5.3.3, and I'm not positive at which point syncing stopped updating the "plays" count in iTunes.  It seems much more likely to be an iTunes issue though.  Anyway, when I view the music on the iPhone in iTunes, the play count is properly updated; it just doesn't get properly incremented in the library.  Any suggestions to fix?
    Other details:  Win 7, manually manage music, backup to iCloud (I tried changing this to "backup to this computer" and re-synced, but that didn't solve it).
    I searched previous discussions and didn't find a solution that applied.
    Thanks in advance.

    I get slightly different behavior from the terminal that you do:
    $ cp test-file.txt /Volumes/webdav.domain.tld/
    cp: /Volumes/webdav.doamin.tld/test-file.txt: No such file or directory
    The files do NOT copy.
    If I mount a different webdav folder on the same machine, the file DOES copy.
    In the finder I get the "You cannot copy some of these items to the destination because the names are too long or contain invalid characters for the destination"
    The file is named test-file.txt.
    Apache is setup like this:
    <virtualhost *>
    ServerName webdav.domain.tld
    #ServerAlias www.domain.tld/webdav
    DocumentRoot /usr/local/www/www.domain.tld/
    DavLockDB /tmp/DavLock.mjt
    <location />
    DAV On
    AuthType basic
    AuthName "domain.tld DAV"
    AuthUserFile /usr/local/www/www.domain.tld/.htdavpass
    Options All
    ForceType text/plain
    <Limit PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
    require valid-user
    </Limit>
    </location>
    </VirtualHost>
    I have another webdav on the same server
    <virtualhost *>
    ServerName webdav.domain2.tld
    DocumentRoot /home/user/Sites
    DavLockDB /tmp/DavLock.sg
    <location />
    DAV On
    AuthType basic
    AuthName "domain2"
    AuthUserFile /home/user/.htdavpass
    Options All
    ForceType text/plain
    <Limit PUT POST DELETE PROPFIND PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
    require valid-user
    </Limit>
    </location>
    </virtualhost>
    This second one works just fine. other than one being under /usr/local/www and the other under /home/user/ I can't figure any difference. Is it possible this is some apache2 weirdness?
    (note this is under a user location instead of /usr/local/www) and it works fine. Permissions are identical (www:www on the folder and all files).
    Message was edited by: Syth

  • How do I remove an apple id account from iphone config?

    Apparently back in the day my daughter bought some songs via iTunes using her own account. My iPod songs/etc on my iPhone came from the instance of iTunes that she used, so I guess there is a blend of songs that I purchased and some that she purchased on my iPhone. I restored my phone to factory settings a couple days ago, then restored from an iCloud backup, and now I'm continually prompted for her Apple ID password (i'm guessing so that it can download her songs from iTunes). I simply want to tell my phone to forget about her account and her songs.... how can I do that?
    Scott

    He needs to set up his own Apple ID. He will need to reset his iPod Touch in order to reconfigure it for his Apple ID.
    Either he needs to do this on his own computer or you need to create a separate user account for him on your computer.
    Apple IDs cannot be deleted. They can be edited or abandoned.
    Apple IDs and iCloud
    How to Change Your Apple ID
    iTunes 10 for Mac- Change your Apple ID account information
    iTunes Store- Associating a device or computer to your Apple ID

Maybe you are looking for

  • Translation of the Field label that is passe in the field catalog on ALV

    Hiii i there a way to make ALV column field label in different language let say i have 3 radio button language english , french , and dutch depending on the radio button selected i want my alv column fields to be display in that language. note i am u

  • The sims 2 error code.

    HELP please. so i have a macbook and i have sims 2 and i stupidly deleted it from my computer and now everything i try and install it is comes up with error code -36. PLEASE help me in finding out whats wrong thanks.

  • Problem opening form: FRM-41041

    hello... i am working on the customization of a standard form in order management. I have done all the customizations. but having one problem, when i open my form from the responsibilty it shows a error saying. FRM-41041 Cannot find form module: inva

  • "Item Containing Primary Key Column Value" does not display records

    Hello, We are developing a new page where an "Automated Row Fetch" process is needed. With other pages we experienced no issues. But with a new one, when defining the value for the field "Item Containing Primary Key Column Value", Apex displays no ro

  • Upgrading from CC to CC 2014 without losing Actions & Filters

    I'd like to upgrade from CC 14.2.1 (64 bit) to CC 2014, but I can't afford to lose my Actions & Filters since I spent 18 months creating and installing. I don't mind moving them, but I need to know where they are and where to move them to. Or anythin