Apple TV power failure - now no connection

After powering up the Apple TV (ver 3) again (the cat had jumped on the plug box and powered it down!) it asked for date and time and hung for a while. Then I restarted it through the Apple TV menu and all was well until I realised my Mac Mini would not connect to it. The icon appeared in the menu bar but on trying to connect would just sit there for ages and eventually turn to a black color again with no connection. Have tried a restart again on ATV and Mini still no luck. My iPad will mirror to it though!
These error messages were received after the second round of restarts.
"An error occured (200500) while connecting to Airplay device Apple TV " and also
"An error occured (-6722) while connecting to Airplay device Apple TV "
Any help and or advice on what to do next is much appreciated.

Hello, pfotoguy.
I see that you are having issues with your Apple TV.  Below, I have provided a couple articles that will help you troubleshoot this issue. 
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Troubleshooting Apple TV not recognized in iTunes
http://support.apple.com/kb/TS1453
Cheers,
Jason H.

Similar Messages

  • IMac and power failure, now new startup screen and abrupt shutoff

    Had a power failure, iMac kept turning on and off, finally unplugged and after 8 hours, I try to start and I get a screen that has the apple logo and spinning load animation, but also a new bar that shows something is being worked on. It reaches the end and abruptly shuts off.

    What version of OS X was your Mac running?

  • ITunes update interrupted by power failure - now can't install

    Gateway computer running Windows 7.  I've run iTunes without issue for years.  I had the bad luck of having an iTunes update interrupted by a power failure.  I got error 193 when trying to run it afterwards.  During subsequent attempts to reinstall, I also get error 7 (Apple Mobile Device Service failed to start).
    Here's what I've tried so far:
    - uninstalled iTunes in the proper order according to Apple help docs, rebooted, attempted to reinstall.  Received error 7 twice during install, clicked to ignore both times.  Received error 193.
    - uninstalled again, searched for leftover files in various folders as spelled out by Apple doc.  Reboot/install.  Same problem.
    - uninstalled again. Searched for and found stray registry key related to iTunes.  Deleted it and attempted install.  Same problerm.
    - uninstalled again, and attempted to install as administrator (the login I'd been using the whole time was an admin login, but I was grasping at straws).  Reboot/install.  SAME PROBLEM.
    I am beyond frustrated.  Why won't this install work?  What is the problem with the Apple Mobile Device Service?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    If you still have issues with AMDS try the steps in Install missing components and/or review HT203188: How to restart the Apple Mobile Device Service (AMDS) on Windows.
    tt2

  • Power Failure, now iMac failure

    Hi there,
    I have an early '09 iMac that has suffered though 5 back to back power outages and restores by the local utility. Now it won't boot into mavericks. I get the spinning gear until I shut the machine off. Attempts to boot into safe mode have the same result.
    I've tried all the typical solutions listed on the net. I've tried booting with verbose mode on, and it seems to hang up around the time bluetooth drivers are loaded up. (forgive my PC language)
    I can boot into single user mode and have checked the HDD, it checks out fine. I've also run disk utility in recovery mode and that also reports no problems. Ive also repaired permissions until no more are listed.
    The next step I tried is an Lion install disk, unfortunately I can't downgrade my OS....
    Then I tried a Time Machine restore, to no effect. Same with a new mavericks install from the apple in recovery mode.
    Here's the weird thing, I had an old WinXP install on another partition that I installed when I was running Snow Leopard, and despite Maverick's not supporting XP, I was able to boot into XP normally, by pressing "C" on startup. This leads me to believe that the problem is software related, not hardware!
    I guy I was talking to about this problem had mentioned something about a kernel rebuild or something? Does that sound familiar?
    Is there any other option that I can try aside from a complete format and re-install? I have a ton of media on this HDD that isn't backed up, and I don't have access to another mac with a firewire port.
    Help please!

    Have you tried booting while holding down the Option key?
    Startup Manager: How to select a startup volume

  • Emergency !! Major Power Failure - Publisher / Subscriber& Connection wont start...

    We have had a major outage, after power restored Publisher services wont start.
    In addition Unity connection has a corrupt database and another subscriber is screwed.
    However - first things first - I desperately need to get my publisher live.
    I have restarted it many times now -
    The GUI doesnt work and at the command line when I type
    utils services list -
    they are all in [STARTING] -
    Uptime is now 2 hours.
    Any ideas ?? Hopefully someone is working on a saturday !

    Thanks for all the feedback -
    I contacted TAC and raised a P1. We lost one publisher and one subscriber - we only had one working subscriber
    we went down the road of SUB to PUB recovery.
    At the end I downloaded the missing COP files and we were good to go.
    The only 'gotcha' seems to be dial-plans - there were causing me a little heart ache and needed to be re-installed. Also MoH - but I didnt have much of that to begin with.
    Apparently the underling Linux OS doesn't like sudden power downs !

  • MacBook Pro Power Failure After USB Connection

    I purchased my MacBook Pro not even a few weeks ago. I've used an external hard disk drive with it fine.
    Today however, I connected my iPad via USB and instantly the power failed, completely cut off!
    Of course I removed the USB connection immediately and attempted to power on the MacBook Pro, but to no avail, I plugged the power cable and the status indicator on the power cable blinks between green and orange in no particular pattern and the battery level indicator on the MacBook Pro does not work (it did previously).
    I realise that there is likely no hope with this situation other than to get a replacement, although my partner also has a MacBook Pro (2011) and this happened to his only yesterday, luckily his powered back on fine and seems to be working. Perhaps this is a software issue?
    Although I'm doubtful, any help would be greatly appreciated!

    I also have a similar problem.  Even with a full battery charge, my 11 month old MBP 15" seems to randomly do an instant and complete power-off. Like your partner,  mine will seem to work fine for a few days then abruptly just fail.  I am still troubleshooting but it seems to happen more frequently when I have something connected to the USB - like my hard drive for backup.  Please share any further info / Resolution.  I am worried I may lose everything before I can get a complete backup.

  • Macbook Pro experienced a power failure whilst upgrading to Lion

    Whilst installing Lion on my Macbook Pro it experienced a power failure, now it wont even switch on. Is there anything I can do to recover my Mac?

    Whilst installing Lion on my Macbook Pro it experienced a power failure, now it wont even switch on. Is there anything I can do to recover my Mac?

  • Configuring a EVM-HDA-6FXO for power failure

    I want to add a EVM-HDA-6FXO to an exsiting EVM-HDA-8FXS/DID so if power goes out I can still have the FXO ports provide dial tone to the FXS ports.
    Two emergency lines NPA-NXX-1000 comes in as a FXO and goes out a FXS port.
    Can this be done. And does it work if the power is off to the router.

    The FXO expansion module supports a power failure port that connects directly to the central office (CO) in case of failure.

  • I had a power failure and for a number of websites why do I now get the message "This Connection is Untrusted."

    After rebooting after the power failure when I go to new websites or even within some websites after clicking on a link the message box appears and I have to add a security exception to get past the message and see the link. I am using V4.0. I do not get that message on another computer using V 3.6.15.
    What can I do to reset the browser?

    John,
    That did it! I no longer get that message. The clock was set to the wrong day and time. So far it is keeping time correctly, but per your suggestion I will also check the battery.
    Thanks for the prompt and accurate help.
    H Weiss

  • I had a power failure 2 days ago, have power now, but cannot send email from my iPad. Everything was fine before that. The box says cannot send mail, the user name or password for Gmail is incorrect. I haven't changed anything. I need help. Thanks

    Hi
    I had a power failure 2 days ago, my computer is running again, but now I cannot send email from my iPad using Cox or my gmail account. I am receiving mail in my Cox account but not my gmail account.It was working fine until the power failure. It keeps telling me, the user name or password for Gmail is incorrect. I have not changed anything. I don't know what is wrong. Can anyone help me? Thanks

    I agree, unplug and replug your router, then reset your iPad by holding down the sleep and home buttons, ignore the red power down slider, and wait til you see the silver apple. let it reboot and then try your connection.
    Chances are rebooting the router will help. You may also need to talk to cox. They may need to reset something on their end.

  • I started Boot Camp on a MAC mini but then  had a power failure after 30 secs :( Now when I start Boot Camp the option to install Windows 7 is gone.  In it's place is Remove Windows 7.  It seems to hang at Partitioning disk  Can I recover?

    I started Boot Camp on a MAC mini but then  had a power failure after 30 secs Now when I start Boot Camp the option to install Windows 7 is gone.  In it's place is Remove Windows 7.  It seems to hang at Partitioning disk  How can I recover?

    Welcome to the Apple Support Communities
    That's because the Boot Camp volume was created, but your Mac hasn't been set up to start automatically from the Windows disc. Insert the Windows DVD and press C key while your Mac is starting to start Windows installation.
    If you want to make sure that everything is correct, open Boot Camp Assistant and choose the option to remove Windows 7. Then, open that application again, select the option to install Windows 7 and you will be able to install Windows as usual

  • I am using Windows 8.1 i have an External Hard Disk and one drive is now inaccessible due to sudden power failure few days ago. Now it shows "Data error (Cyclic redundancy check)". I want all my important files and Pics. How ?

    Hi,
    I am using Windows 8.1
    I have an External Hard Disk i have partitioned it to 4 parts.
    One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
    Now it shows "Data error (Cyclic redundancy check)".
    I tried all the procedures provided here like
    chkdsk /f, diskpart, rescan etc
    but no result :( (i mean all processes failed. They could not detect the drive).
    Please help me to get those data, pictures and project files.
    thank you

    Then why aren't you posting this in the Windows 8 forums found @
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
    This is a Windows 7 forum for discussion about Windows 7.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Support problem. The adviser tried to diagnose the failure of an application called JOTNOT PRO to update. He said he'd phone back at 8pm. I pick up his call at 8pm. Electronic voice: thank you for calling apple. We are now closed" So now I have 2 problems

    Support problem. The adviser tried to diagnose the failure of an application called JOTNOT PRO to update. He said he'd phone back at 8pm. I pick up his call at 8pm. Electronic voice: thank you for calling apple. We are now closed" So now I have 2 problems: the adviser had got me to reset so bye bye wifi passwords and settings. And then when he phones back as we agreed he's not actually on the phone, it's just a voice saying Apple Support is now closed! What on earth is going on at apple support I wonder.
    Anyway, the original problem: an application called JotNot Pro fails to update. The error message says something like "you cannot update this cos either you bought it with a different Apple ID or somebody else bought it."
    Neither applies. Can anybody help?
    PS. This is my first approach to the support community so please bear with me!
    William

    You might have better luck contacting the app's support or developers.

  • I have an ipad I used with a computer which's now broken. I bought a new Macbook Pro and signed into iTunes with my usual Apple id and pw. I connected my ipad to the new Macbook but it won't back up my photos or Apps from the ipad to the new macbook. Help

    I have an ipad I used with a computer which's now broken. I bought a new Macbook Pro and signed into iTunes with my usual Apple id and pw. I connected my ipad to the new Macbook but it won't back up my photos or Apps from the ipad to the new macbook. Help

    What do you mean " back up my photos or Apps"?
    The photo sync is one way - computer to ipad.
    You can transfer itunes purchases.  Without syncing:  File>Transfer Purchases
    Copy everything from your backup copy of your old computer to your new one.

  • Downloaded ios7 and now my imessage wont accept my apple Id password. says check network connection and try again. but connection is fine??

    downloaded ios7 and now my imessage wont accept my apple Id password. says check network connection and try again. but connection is fine?? any suggestions?

    Yes there has been a problem. What seems to work for most people is to restore your device. Make sure you back it up before
    http://support.apple.com/kb/HT1414

Maybe you are looking for

  • How do I set Acrobat as default over Reader?

    I use Acrobat Professional but recently installed Reader to check my PDF forms. Can someone tell me how to set Acrobat as the default program in favor of Reader? Thanks

  • Event capturing in OOP ALV

    Hi    I want that when user doubleclicks on the any row of alv, the row value should be taken to some workarea.If possible provide some code. Thanks.

  • Password Sync by ISW

    Hi, Password sync is not happening from AD to LDAP .user unable to login to the Directory server when a user changes their password by using ctrl+alt+del in AD with new password.But changing the password from LDAP then user can able to login to the A

  • What causes my synaptics mouse to become uncontrollable in Photoshop elements?

    What causes my synaptics mouse to become uncontrollable and keep scrolling in Photoshop elements?

  • It appears you're not allowed to...

    I made a discussion here to ask a question about iPad, and I can't find it on the forum list here now and when I use the link to go to it directly it says: "It appears you're not allowed to view what you requested. You might contact your administrato