Apple TV Reboots every time it starts a slideshow that is home shared.

Just bought a 2nd Gen Apple TV to replace my first gen with and for whatever reason, every time it enters into a slideshow, it crashes and reboots itself. So far it looks like it only does this with pictures that I am sharing using Home Share and iTunes.

I am experiencing something similar as well. I am speaking of the slideshow screensaver. It only just started happening in the past month. It may be only with certain screensaver slideshows, I am not sure. There seems to be a pattern. The first time it happens, it just stops playing the media and reports an error with the content. The second time it happens, it jumps back to the default home screen on the Apple TV 2. Then on the third time, it resets itself (reboots).
It's very strange.

Similar Messages

  • I am unable to open I cloud with my apple I'd every time I try message comes that " max no of account have been activated on your I pad"  what needs to be done,how can I delete the accounts which I had opened as I don't remember the I'd and passwords

    Can any one help me on this

    It seems that you've been trying to create Apple IDs (even if you thought you were just trying to use one to make an iCloud account) and you have reached the max allowed number of IDs you can create on the device (which is 4 or 5 as I recall). The only way to create yet another one is to use a different device or a computer. No other way around this.
    If on the other hand you want to USE an existing one, go to Settings>iCloud and enter that ID. 

  • Every time I start my Apple TV it shuts down. I have to unplug it and wait for it to reconnect before I can use it.  Any suggestions?

    Every time I start my Apple TV it shuts down. I have to unplug it and wait for it to reboot before I can use it.  This makes turning on Apple TV a very long process.  Any suggestions?

    That would be very hard to do, as I would have to do a lot of things--including moving furniture to get at the back of a receiver--and I'm not at all sure that the receive could accommodate it.
    The process is like this:  I dial the receiver to the Apple TV input.  The light comes on, like it's connecting, but then the Apple TV goes dark before any connection happens.  Then I unplug the power cord, wait a few moments, and plug it back in.  Then the Apple TV actually connects, but only after a full reboot (setting time, etc).

  • Every time I started my Imac, loks like If It is the sistem downloading again, with yhe white screen, the apple and the filling up bar. Its that normal???

    Every time I started my Imac, loks like If It is the sistem downloading again, with yhe white screen, the apple and the filling up bar. Its that normal???

    It is for Yosemite. Not for Mavericks or earlier.
    OS X Mavericks- If your computer stops or delays while starting up with progress bar

  • Every time i start my MacBook Air i get the spinning wheel and have to soft boot (shift, control, option, power) it three or four time s before it starts

    Every time i start my MacBook Air i get the spinning wheel and have to soft boot (shift, control, option, power) it three or four time s before it starts. It has only been over the last week or so I also found Safari will not load up and tyou have too open then shut from the drop down then restart it to get a page, any help pleas?

    Do this:
    Reinstall Lion, Mountain Lion, or Mavericks
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
         Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
         Repair the Hard Drive and Permissions as follows.
    After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall
         Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • Every time I start my PC it says Procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll  It also keeps freezing on Itunes and I cannot sync. Please can anyone help?

    Every time I start my PC it says Procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll  It also keeps freezing on Itunes and I cannot sync. Please can anyone help?

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "libxml2.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "libxml2.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • HT3529 My group messaging on/off label isn't showing up at all. I can only create group messages but every time someone starts a group chat it says its send to my number but I never got any text. I wen't to settings Messages and I can't find any on/off sw

    I can only create group messages but every time someone starts a group chat it says its send to my number but I never got any text. I wen't to settings>Messages and I can't find any on/off switch.

    Hello there, Idaniabb.
    The following Knowledge Base article offers up some great information in regards to group messaging and also links to another excellent resource for troubleshooting messages as well:
    iOS: Understanding group messaging
    http://support.apple.com/kb/HT5760
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My Ipod touch plays music but every time I open an app that I have downloaded it closes immediately.  This started happening after updating to the latest version of Ipod software.

    My Ipod touch plays music but every time I open an app that I have downloaded it closes immediately.  This started happening after updating to the latest version of Ipod software.

    Here's a couple things to try:
    1. Reset the iPod by holding the sleep/wake button and home button at the same time for 10-15 seconds until the Apple logo appears on the screen.
    2. Uninstall and reinstall one of your purchased apps. Sometimes this can rectify the issue.
    3. Connect the iPod to iTunes and restore it. New system software usually resolves the issue. Make sure you sync before restoring because a restore removes the data from your iPod.
    Hope one of these works for you!

  • TS1424 Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404). I have researched this on Google and I have not read of any solution to this. Please advise.

    Him
    Every time I start up iTunes I get this error message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)."  I have researched this on Google and I have not read of any solution. Please advise.

    Here you go: http://support.apple.com/kb/HT1923
    There are three steps so make sure you follow all of them. They are:
    remove iTunes and everthing related to it
    verify everything is really removed
    reinstall iTunes.

  • ITunes Setup Assistant runs every time I start iTunes 7.3.1.3

    The past 2 iterations of iTunes have had the same problem for me - even though the program is installed already, it doesn't save my settings and runs the setup assistant every time I start the application. I've gone through the assistant twice and put everything as I had it previously but, once I close the program and restart, the assistant pops up again and my settings are gone. I never had this problem until 7.3 or 7.3.1 and it's very frustrating... (>_<)<br>
    IBM T43   Windows XP Pro   2.0 ghz Pentium M, 1 gig ram

    Well, iTunes appears to finally work correctly. I don't know exactly why this is but it's due to one of three possible things. First, I uninstalled the 2 programs that I had installed to monitor what music I played for their services. These programs were Last.fm for Windows Version 1.3.1.1 iTunes plugin version 2.0.11.0 and Virb.com iTunes Plugin Version 1.0.0.5. Finally, instead of using the Apple Software Update on my computer as I had previously, this time I went directly to Apple's website, downloaded the entire iTunes + Quicktime install package, and reinstalled from that. After doing so, the Setup Assistant ran again but finally remembered my altered settings upon program restart. Now that iTunes was working properly, I have reinstalled both plugins and they now appear to function properly without negatively affecting iTunes. I hope this helps people who have also installed plugins to monitor their music listening patterns and had problems with the latest iTunes update.

  • HT1414 why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

    why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

    Hi Cyprus11,
    Thanks for visiting Apple Support Communities.
    If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best,
    Jeremy

  • My bluetooth needs to be paired every time I start the car

    can anyone give me any help with the problem that my new 3G iphones needs to be unpaired and paired again every time I start the car (Range Rover). My original iphone (once paired) connected automatically each time. Has the bluetooth way of working changed on the 3G. Any advice appreciated.

    The bluetooth stack of the iPhone 3G is not working. if you check on the www.bluetooth.com web site, iphone 3G IS NOT APPROVED for bluetooth compatibility ...
    After debugging, I found that the L2CAP of the iPhone 3G is not answering properly the Bluetooth request from the hand free profile.
    Apple should not advertise bluetooth 2.0, they are not compatible.
    PS: the admin deleted my previous post, explaining the detal about it.
    Is Apple aware of the problem?
    <Edited by Moderator>

  • HT201250 Why do i have to use the password for time capsule every time i start my computer

    Why do I have to use thr password for time capsuel every time I start my imac?

    With hindsight, the previous response I got from Apple was just a way of shelving the problem.
    Having just had to reset my password after another 3 months, I contacted Apple again, and it happened that the senior advisor whom the phone agent consulted had had exactly the same problem as me, and had found that iTunes could fix it.  However when I spoke to iTunes they told me I needed to speak to Apple ID account security.  The Apple ID account security representative spoke to a senior adviser, then told me that it would be fixed after I reset my password.  However I am not convinced that anything was actually done, so I may be back here in another 3 months ...
    To modify Roger's advice, the solution I was given is: go to https://expresslane.apple.com ; select 'All Products and Services' in the first column, 'iTunes' in the second column, 'iTunes Store' in the third column, then "Account Management" and "Apple ID account security", then "Talk to Apple support now". A complication is that the "Talk to Apple support now" option only appears when UK English is selected.  So you either need to select UK at the top, or find another way of making phone contact (the email link just went back to the person in iTunes)!

  • I get a nimax.exe- Applicatio​n Error every time I start labview

    every time I start a vi either by double clicking or by opening labview first I get an application error... "the instruction at "0x1ca12b96" referenced at "0x00000000", The memory could not be "read", click ok to terminate the program". when I click ok the program does not terminate and as long as I don't close labview completely I can close it and reopen the vi. I am unsure if the program malfuncions after that point but it is certainly an annoyance. Have you seen this problem before? Is there something that I should do to the vi to correct the problem? Thanks,
    David Long
    K.H. Controls

    I talked to NI about this issue, and tried the following WITH success (note that I am running W2k and Labview 6.0.2):
    1. Uninstall all NI components in the reverse order you installed them. For me, this was Ni-Daq, Ni-488.2, and finally Labview 6.0. If you have to, look at the modified or created dates of the folders to see what order you did it in.
    2. After this, I decided to go a bit further and delete the registry key for Ni-Daq under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\NI-DAQ. Make sure you Export your registry key beforehand in case something goes wrong.
    3. Install Labview 6.0, custom installation. For this installation, DO NOT INSTALL the drivers, just Labview.
    4. After that, I installed the upgrade patch for Labview 6i -> 6.0.2, downloaded at ni.com.
    5. Next I downloaded the 2 files for NI-DAQ 6.9.3, uncompressed the files, and ran the setup. When the installation was done, I chose to not reboot now, but let me do it later. At one of these points, you can also Mass compile the VI's. I don't think it's necessary at this point, but I did it anyway.
    6. Finally, I downloaded NI-488.2 version 2.2 (which has a new version of MAX than NI-DAQ 6.9.3), uncompressed it and installed it.
    7. After this last step, I rebooted the computer and was able to finally get into MAX to configure my DAQ card.
    So far, this method has worked. Perhaps it can work for you.

  • Installed Mavericks on my Mac 2 days ago, and now every time I start up the Mac a box appears iTunesDroper, asking me to enter my password. I enter the password it is accepted and then keeps repeating the same until I click on cancel

    Installed Mavericks on my Mac 2 days ago, and now every time I start up the Mac a box appears iTunesDroper, asking me to enter my password. I enter the password it is accepted and then keeps repeating the same until I click on cancel

    Kernel panics are usually hardware.
    Hold down 'd' key and it should boot into Apple Hardware Test, or insert your OEM install DVD to do so.
    No, we are mere users and mortals and usually you need to do some troubleshooting by trial and error and testing. Schedule an appointment.
    http://docs.info.apple.com/article.html?artnum=106227
    http://www.macmaps.com/kernelpanic.html
    http://www.thexlab.com/faqs/kernelpanics.html

Maybe you are looking for