Apple TV remote doesn't work with my 4s anymore

Why does the Apple TV remote app not work with my 4s anymore?

Hi capoconstruction,
If you are having issues with the Remote app on your iPhone, you may find the following article helpful:
Apple Support: Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
http://support.apple.com/kb/ts1741
Regards,
- Brenden

Similar Messages

Apple Radio Remote doesn't work with the iPod Touch?!

In the Future it will be possible to use the iPod touch with the radio remote. About a week before on the apple store site the radio remote was supported by the iPod touch.

http://www.amazon.co.uk/Roberts-ROBI-DAB-FM-Radio/dp/B000WZHJC0/ref=sr11?ie=UTF8&s=electronics&qid=1257068810&sr=8-1
Better than the Apple radio/remote.
Works with my (1st gen) iPod Touch.

Apple earphone remote doesn't work with lion

I usuly use my apple in-ear with my macbook pro; and the remote worked fine.
Until I updated the OS from Leopard to Lion, I can't use the remote anymore, as the in-ear as the original iphone earphone!
I precise that the microphone is OK.
Thanks for helping!

When you say that your label data was kept in Appleworks was it kept in a database?
If so there is probably nothing that can open it under Lion.
I know when I did my migration from AW, all of my document I was able to open in Pages and all of my spreadsheet I was able to open in numbers.
The information I had in AW databse I had to export using AW and then I imported it to Bento. I did all of this before migrating to Lion.
If this information is that important to you, it may be necessary for you to run Snow Leopard again at least on a partition to get the data exported.
Allan

Apple tv mirroring doesn't work with ipad 2

Apple tv mirroring doesn't work with ipad 2 and last update achieved

you have to be sure that you have iOS 4.4 on your Apple TV. Apple pulled 4.4 due to problems and hasen't re-released it yet. the only way now is to hook it up to your computer with a micro USB cable and then in iTunes you should see your Apple TV and do a restore and it will then put 4.4 on the Apple TV but it will wipe out all your settings and you will have to do all that over again but mirroring will then work.

Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion

My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion.
I have it on upper left corner but it take the whole computer to sleep, no way to turn just the display.

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

We just got the Bose TV system. It is great, but the Bose remote doesn't work with our Apple TV unit. We have to still use the Apple TV remote. Any suggestions?

The Bose TV remote doesn't work on the Apple TV. I have to use the Apple TV remote. Is it a system problem with the Apple TV?

My appletv works with its remote
Ios devices using the remote app
2 logitech programable remotes harmony ones

HT3325 Keynote Remote doesn't work with hyperlinks?

Remote sync well with iPad .. Impressive
However, it doesn't work with any hyperlinks!
It's simply an image and swiping the pages ... Ignoring all hyperlinks ... It does work with media but u would have to put them in sequence in your slides. If you work with many hyperlinks within a slide, you can't get any to work with the remote!
Quite disappointed that Apple actually charges for an app so simple with no value added services!
There are many free apps doing the same simple tasks.
Thumbs DOWN.
Do something about it Apple!

Any remote that actually works?

Remote doesn't work with Universal Docking Station

Hi
I have an iPod nano 3rd gen. Whilst in the dock the remote doesn't work at all until I select some music manually using the nano controls. Then I get a response. This is the second docking station from Apple.
Surely it has been designed to work with the remote as soon as it has been docked to enable scrolling through the menus? There are archived discussions from years ago about the same problem and no solutions! It appears that this product is known to be defective by Apple yet they do nothing and when you call them they act as if the problem doesn't exist. They appear to be selling products that don't work and then do nothing about it.

i just bought this dock as a car dock. I have it hooked up to power 12v and output to 1/8 into head unit. Now, I have to be in iTunes music to get it to work and it only allows volume, playing of files in a playlist and to next song. Are any of you guys having issues with VERY limited use of the remote and lack of really a benefit from using a remote because you have to touch it anyways to change through songs or video??? Are you guys wondering why you even bought it if the remote is not supported as a functional addition?

Firefox command line option "-no-remote" doesn't work with profile.

I want to run the stripped version of firefox in background with one application and another full version of firefox for normal browsing. I have created the profile for the stripped version of firefox and loading the same using command firefox -P "stripped" -no-remote/firefox -no-remote -P "stripped". But when I start the full version of firefox by launcher "firefox" than it directly loads the stripped version even used the -no-remote option with profile. So I have created launcher for firefox and used the -no-remote with default profile like "firefox -no-remote". It works when first time I click on launcher but for second click it shows the message "Firefox instance is running, or not responding. close the firefox and restart the system". I have gone through the online available documents that suggests that use the -no-remote option with profile so the default profiles works correctly. But -no-remote option doesn't work with the profile. So is there any way to launch the full version of firefox by launcher on second click on launcher?

Yes, I used separate profiles only. But the -no-remote option doesn't work as mentioned http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile.
Please find below the command what I am using
firefox -P "stripped" -no-remote
firefox
If I use the above command than the new firefox window get the configuration from the stripped even if I have used the -no-remote.
I use the -no-remote with firefox default than it works for the first time.
I have created the launcher for firefox default. So if I click second time on launcher than it doesn't work.
firefox -P "stripped"
firefox -no-remote
(But doc on link -> http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile) says do not use the -no-remote with default.
Do you have any idea why this is happening?

Official Apple Composite Cable DOESN'T WORK with iPhone 3GS firmware 3.1.2

I've tried everything and I cannot make the official apple composite cable (MB129LL/B) work with my iPhone 3GS 3.1.2.
I get no video output AND no sound as if the cable is simply not made for my 3GS
What do need to do to get composite video output on my 3GS 3.1.2????

"The 3GS will not work with a Composite cable. It will only work with a Component cable. See here: http://support.apple.com/kb/HT1454"
I have had no luck with getting the component cables to work with my 3GS. They are the Apple branded cables, not some knockoff. I would be angry if I needed to buy the universal dock to get them to work. Per some of the forums I've read, it is not needed. Also, from all the reading I've done on the TV out feature in this forum and others, it appears to be a hit or miss whether it works or not.

Keynote Remote Doesn't work with iPhone, iPad

Hi,
I have the latest versions of Keynote on my iPhone 5S, iPad 4 and MacBook Pro 13" with Retina Display.
All three devices on the same WiFi network. Using WiFi I was able to remotely control/play the presetatnion between iPhone 5S and MacBook.
However, it doesn't work between iPhone 5S and iPad 4. Any help ?
I tried Bluetooth as well. They seem to not discover each other and neither able to remote control.
Any tips ?
Thanks.

After having to upgrade to the latest version of iOS Keynote (because I edited one of my presentations online through iCloud), I received the message that Keynote Remote is to be discontinued. The alternative they offer is to download Keynote onto your iPhone as they have integrated the remote feature into the full program.
The problem that I found is that space is more of a premium on my iPhone than my iPad and I don't use the full program on the iPhone, as the remote app takes only 3MB and the full app? 444MB.
I hope Apple receive similar complaints about this as nearly half a Gig for what will amount to a remote for Keynote is preposterous. I have already purchased my 16GB 5S, it's not as if I can put more memory in it now.

Bose Sounddock remote doesn't work with 6th Gen 160GB iPod Classic

I have recently purchased a Bose Portable Sounddock and whilst my iPod Classic (160GB 6th Gen) will work in the docking station, the only buttons on the remote that work are the volume buttons - everything else has to be done on the device. It does charge when in the docking station as well. I have an iPhone 4 that works perfectly a Nano that works perfectly but the Classic won't. I have spoken to Bose who tell me that there should be no issues with my Classic. I have reset it to factory settings and it hasn't helped. I have tried another Sounddock in a local shop and it has the same issues.
Can anyone suggest a way to fix this? Any help appreciated.

Assuming that the Bose Soundock, is brand new and not refurbished or pre-owned
My Suggestions
Check that the remote batteries are good.
Hard Reset the iPod, (press menu and select buton for about 10 secs or till the Apple logo comes ON)
Restore the iPod (this is to fix any corrupted firmware)
If the above doesn't work, bring the iPod to the Bose store and try it on their Soundock (bring your remote and test)

Apple tv 2 doesn't work with Sony Bravia

Hi,
I have tried to connect the Apple tv 2 to a Sony Bravia (model:KLV-32BX300), after I make the connection (HDMI), I get initially the apple logo, but after a few seconds I only get the screen to change slightly color, like if wanted to make a connection, but nothing happens. After a while a "Unsupported signal, check you device imput" comes up, after that I get the apple logo again!!! and everything starts all over....
I have tried many HDMI cables, unplug the tv and the apple tv... Before I hade the apple tv 2 connected to tv Sharp, and everything worked perfectly.
I'm desperate!!!
Hope somebody can help!
Thanks

I think the fact that it doesn't work on 2 TV's does tend to suggest the problem is with the Apple TV rather than the TV, but this is by no means certain.
Jailbreaking may or may not be the problem, however it does create another problem for you in that if the problem is a result of jailbreaking we cannot discuss a fix under the Terms of Use for these communities.
Factory restoring to remove any unauthorised modifications may resolve the problem and allow us to discuss the problem should it persist.

Iphone remote doesn't work with itunes anymore.

I've replaced my wireless router in the last week, but I think remote still worked after that. I don't know what is going on. Firewall is turned off, bonjour is running (I can see the homesharing from another computer) But iphone remote doesn't find the library.

In iTunes > Preferences > Devices - check what remotes are currently paired, then remove any and start the process from scratch. Also, check you are signed into iTunes with the same account on your phone and mac.

Apple TV remote doesn't work with my 4s anymore

Similar Messages

Maybe you are looking for