Apple TV remote (left button) switches the TV input mode
Often when I click the left button on my Apple TV remote while using the Apple TV, the TV (LED 1080p 60hz) switches to the analogue mode. I've tried to alter the settings, however I'm unable to remedy the problem.
Any suggestions would be gladly accepted.
same here. tried all the apple recommendations but the up key still doesn't work. till now i used my ipod touch as a remote but i just changed my broadband supplier and now i can't connect apple tv to the new network. guess i'll just have to buy another remote now.
Similar Messages
-
Apple TV remote up button not working. Can you help?
My Apple TV remote has just stopped working properly.
I have tried unpairing and then re pairing it on numerous occasions, I have reset my Apple TV box and still the UP button on the remote won't work. This is now a real problem as I've changed my apple ID and I cannot enter my new ID on the Apple TV.
Can anyone help?
Thankssame here. tried all the apple recommendations but the up key still doesn't work. till now i used my ipod touch as a remote but i just changed my broadband supplier and now i can't connect apple tv to the new network. guess i'll just have to buy another remote now.
-
How do i use the apple tv remote app to navigate the apple tv?
Hi everyone,
I've been given an apple tv remote from my step father. I couldn't honestly tell you which model I'm afraid. He's lost the remote.
I've managed to get the apple tv turned on using a youtube that explaned how to set up with an ethernet cable. I can even airplay stuff from my itunes. However I want to pair my existing remote and I can't work out for the life of me how I use the apple tv remote app to navigate whilst on the apple tv main menu.
There's just no option to do this, despite the youtube vid seemingly doing it. Has a previous update of the app rendered this featured obselete?
Some clarity or help on how I can navigate the apple tv using either my iphone or macbook would be great. That way I can pair my existing tv remote for future use.
Thanks everyone in advance!
James WrightPurchase a replacement remote.
The remote is required for configuring the ATV and setting up the remote app on iDevices. -
Cannot find the button "Switch to configuration editor mode" in ConfigTool
Hi All,
I am trying to edit the auschemes.xml but I run the configtool.bat and i cannot find the button to switch to edit mode.
I am following these steps:
http://help.sap.com/saphelp_nwce10/helpdata/en/d3/1dd4516c518645a59e5cff2628a5c1/frameset.htm
Can someone help me? I think that it is a nonsense but the button doens't appears.
Thanks!!
Nicolás.-Hi ,
Choose icon which is like pencil to Switch to configuration editor mode.check with your other adminsitrators did they restrict you to edit?
Koti Reddy
Edited by: Koti Reddy Chimalamarri on Feb 27, 2009 2:10 PM -
Encore Remote Preview Buttons Not Working in Preview Mode
I have had this annoying problem on several ocassions and it's back again. I have never been able to figure out what causes it.
When in the prview mode to test the DVD compliation to see if the remote buttons will change between the menu buttons I created, I am unable to select any of the three buttons in the menu with the remote selector at the bottom of the preview window. I am able to select them with a mouse click but not with the remote buttons meaning that when the DVD is built, a real reomte will not change the titles that are associated with each button.
What can be causing this to keep happening. The compilation in Encore is a linked composition form Premier CS4--both Encore and Premier are CS4.
Please help please.
Thanks!!I know this post is old, but I found it as I am having the same issue. Encore CS5. I have a menu that I have 9 buttons layed out, near the bottom, and the previous/next and main menu buttons are near the top. The 9 on the bottom are each numbers 1-9. However when I preview it starts at 1 then pressing right arrow does not jump to number 2 but #11, the "next" arrow button on top of page.
I will post a screen shot with buttons 1-9 hilighted, showing they are not touching, and the button routing turned on.
Any thoughts?
I guess I will make a new menu and see if I just need to reuild it. -
My remote will not work on Apple TV. The play button does not play so I can not access any content. What can I do?
Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen. -
How to turn on Home shearing on Apple TV without remote? I lost my remote and to be able to use the app (remote) I need home shearing on.
You have to have the remote. A replacement is only $20.
-
Remote Menu button: to the chapter menu or the main menu?
Using DVD Pro (version 4.2.1) for the first time, and I've discovered a lot of fun elements. Here is a question about the remote control settings.
I want people to be able to return to the +main menu+ if they want while playing the track, by pressing 'menu' (and I've found the resume feature, too). However, the track has chapters, which are assigned to 3 chapter menus. So, when they are playing a particular chapter, i want them to be able to return from it to the +chapter menu+ it came from, by pressing the 'menu' button.
However, this doesn't work: when playing the video track, pressing the 'menu' button takes me to the chapter menu assigned to that particular chapter, not the main menu that I assigned to the track.
Well, I see in the handbook that the marker remote setting takes precedence over the track setting ... so which would you find preferable:
1. when the viewer is playing the video, the menu button: goes back to the main menu.... then when the viewer is watching a particular chapter, pressing 'menu' also goes back to the main menu, instead of the chapter menu, so viewer has to navigate back into the 'scenes' menu
or
2 when watching the whole video, pressing 'menu' takes the viewer to the chapter menu and then has to 'up' to the Main menu.... and therefore when watching a chapter only, 'menu' button returns to the particular chapter's menu, which is fine.
I thought I would have the 'menu' button return to the chapter menu:: up button for faster/easier access to the main menu, for viewers just watching the video, and convenience for viewers watching a chapter.
What is the more experienced opinion?
thank you
ElizabethHal MacLean wrote:... 'Stories'. If you are playing the track from your main menu, then the menu call for the track should take you back to the main menu. If you are on a chapter menu and start playback then instead of going to the chapter marker, go to a story that contains the chapter marker instead. The story can also have a menu call and end jump set.
Ahh!
The thing is, if you start a chapter playing, do you want the footage to continue to the end of the track, ....
Yes, that's exactly what i want, and as above, for the chapter in the chapter menu to return to that chapter menu
If the former, put all of your markers into a single story and set the menu call to go back to the chapter menu.
Thank you!
I had already created stories from the second track on the dvd, with each one having an end jump back to the story menu and as no one had replied to this post, i had decided to make the chapters in the main track into stories too, but wanted them to continue into the next chapter. In fact i'd already created these 11 stories, some with 2 chapters in them, when I read your post.
So i did as you said and put all the chapter markers into one story, with no end jump for the chapters, but a menu call from the story to the 'chapter' menu instead of the main menu. Much cleaner than the way i had started to do.
And it works just the way i want it to : track's menu call is to the main menu, 'chapter' menu calls are to the chapter menu. Thank you so much!
Elizabeth -
I tried pairing my remote with my new Macbook Air. I went into the security settings, entered my password, opened advanced, and, unlike my old system on my previous Macbook, saw no mention of where to select for infrared remote pairing. Where is it?
Newer MacBook Air models do not have infrared ports.
So infrared remote can not be used.
Best. -
my apple tv wont work!i can see the pictures in my screen and everytime I push the buttons wont navigate o go to youtube,netflix etc.remote battery is okey and I can see the apple tv is blinking everytime I push the remote.I already did hold menu and rewind buttons together.after 6seconds the apple tv keeps blinking and stop..anyone help can help me?or do I have to buy a new apple tv remote?
Welcome to the Apple Community.
Whilst the remote app can be used once the Apple TV has been set up, you still need the original remote to set it up first. -
How do I submit netflix ID using Apple TV remote
How do I submit the Netflix ID using Apple TV remote?
Welcome to the Apple Community.
just use the up, down, left and right buttons to navigate to each letter or number, pressing enter when the selection is correct, when complete navigate to and select the submit button. -
Touchpad Left Button on s12 broken?
Hi all,
I have just switched on a brand new s12 and discovered that the left button of the touchpad is disabled or broken. I had look for a new driver but the s12 is not on the list for new drivers. I am stuck and moved from happy when I opened the package to frustrated... Is there anyway to check if it is broken or just a configuration problem?
Thankshttp://consumersupport.lenovo.com/uk/en/driversdownloads/drivers_show_2216.html
http://consumersupport.lenovo.com/uk/en/driversdownloads/drivers_show_1331.html -
I've been trying to sort this out for a while; somehow my Apple TV is no longer homesharing with the rest of my network. I had hoped to use my apple TV remote to re-activate the Remote Apps I have on my iPod, but the remote isn't responding. I've tried unpairing, but if I press menu-rewind for six seconds, it sends me to the resolution screen instead, and the white light flashes repeatedly - I can't get the remote to accept the resolution settings, or get the cursor to even so much as move. Extremely frustrating as I've been unable to make this work for a week and I don't drive (I'm disabled and housebound) so just popping into a shop somewhere to get it fixed is a slim-to-none chance of possibility.
I really hope there's a better solution!all apple remotes work out of the box
borrow the remote from the neighbors kid Eric that he got with his appletv or imac or macbook or the likes it works
or buy a new remote it works
borrow Erics remote and use it to setup remote app on an ios device that works too -
Where has the recent pages button on the navigation bar gone?
On the V3 navigation bar we had a "go back one page" a "go forwards one page" and a "recent pages" button. The latter has disappeared in V4, which is inconvenient when I want to skip over several pages to get back to the one I wanted. Is there a way to retrieve this facility?
The back/forward buttons should still be there by default, to restore them see https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing
When you have restored them, there is a small change in functionality. The small dropdown marker next to the back/forward buttons has been removed. To get the list of sites, you can either right-clicking on the back/forward buttons, or hold down the left button until the list appears. -
Is the back button drop down arrow replaced by the little arrow next to the star on the bar?
Maybe it didn't install correctly, I have Windows XP if that makes a difference. I know from the tour when the new one loaded there is supposed to be a bookmarks thing next to the new location for home but it's not on there either. It's still on my toolbar so I don't care enough to fix it so there is no need for anyone to address it, I just put the info in case it tells you something about it not installing properly.
Sorry, it's not easy for older people to keep up with all the daily website changes, adding browser changes adds to the confusion. I hope my head doesn't explode one day. Thank you for the help.You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker
Maybe you are looking for
-
How to remove values formatting in export to excel from ALV grid
Hi all, I have small issue, I have ALV Grid with some data, but the problem is with columns containing e.g. gross amounts, because it is displayed in the grid as e.g. 1.764,81, and after export to excel it is still in this format (with dot and comma)
-
Tabbed panels, Collapsible Panel, and Server Side Include
Hi, I'm having a problem with the way a Server Side Include inside a Collapsible Panel displays. Here is how this particular page is set up. The page has spry tabbed panels. >>A panel has one overall Collapsible panel (the main product tab) >>>>Neste
-
Error Ora-604 on connect from Visual Studio 2008 to Oracle database
Hello! I have installed Oracle 9.2.0.6 Database, Microsoft Visual Studio 2008 and today I succesfully installed ODP.NET 1110621. I wrote a simple console application like this: using System; using System.Collections.Generic; using System.Linq; using
-
I was using my wife's account on my Iphone. I wanted to separate and tried to restore my Iphone with my new account and wanted to restore. The touch screen function stopped working. It does not let me start the set up.
-
Do numerical indicators display extended precision floats correctly?
I'm using windows XP sp2 on a new computer with a new intel processor, nothing weird. I'm displaying an extended precision floating point number using a numeric indicator that is set to display an extended data type with thirty digits of precision. I