Apple TV remote lost, and no wifi connection

Help, Ive lost my Apple TV remote, Ive seen the forum topics on the remote app but Ive also changed BB providers recently so the Apple TV box isn't connected to my wifi so I can't access it! I'm happy to buy a replacement remote but wondering how I would set it up as I can't access the settings on the Apple TV box.

The Apple TV would recognize your replacement remote out of the box, same as your original one did.

Similar Messages

  • I just bought an Apple TV and I'm trying to connect airplay but the icon does not appear! My iPhone and Apple TV are on the same wifi connection but the airplay button does not apper?

    I just bought an Apple TV and I'm trying to connect airplay but the icon does not appear! My iPhone and Apple TV are on the same wifi connection but the airplay button does not apper? The same thing with my iPad mini

    Try restarting all devices including portable  iOS ones and your router.
    Check Airplay is not disabled in AppleTVs settings.
    AC

  • Can I use ipod touch 5th to mirror my screen on Apple TV via Airplay with out wifi connection?

    Can I use ipod touch 5th to mirror my screen on Apple TV via Airplay with out wifi connection?

    Welcome to the Apple Community.
    Peer-to-peer AirPlay
    With peer-to-peer AirPlay, your iOS device and Apple TV don't need to be on the same Wi-Fi network. If you have one of these products, you can use peer-to-peer AirPlay:
    * iPhone 5 or later, iPad (3rd generation or later), iPad mini, or iPod touch (5th generation) using iOS 8 or later.
    * Apple TV (3rd generation rev A, model A1469 or later) with Apple TV software 7.0 or later. Find out which Apple TV model you have.
    To use peer-to-peer AirPlay, your iOS device needs to have both Wi-Fi and Bluetooth turned on.

  • Did all the resets and still wifi connects and disconnects , plz help

    did all the resets and still wifi connects and disconnects , plz help

    I upgraded Apple TV late last week. Last weekend I rented a couple of movies from Apple TV. I watched one immediately, and was going to watch the other one the next day. On Sunday I opened up Apple TV to watch the film, and..... NOTHING THERE. I could see 'purchased movies', 'top movies', etc., at the top of the bar, but no mention of rentals. Even the film I'd watched (which obviously you can see for 48 hours) had disappeared into a black hole in Apple TV. I have been charged for these movie, and sent in a complaint.
    My airplay seemed to be fine, but.... last night, my computer was not seeing an Apple TV or showing an airplay sing, so I restarted and the Apple TV and airplay sign returned. If I chose to watch the film on the computer it started up immediately, if I chose airplay, I got the first image of the film and the loading sign going on and on (round and round) forever. The film never started. I restarted my Apple TV, the same. I restarted the computer, the same. I tried with various programmes and no go.
    iMore has the following suggestion. I am not sure if this will help. It sounds a PIA, but if I can't get airplay to work, I might try it: http://www.imore.com/how-restore-2nd-or-3rd-generation-apple-tv-back-factory-set tings-itunes

  • HT201653 after downloading 8.1.1 I have trouble connecting and keeping wifi connection on ipad 4

    after downloading 8.1.1 I have trouble connecting and keeping wifi connection on ipad 4

    I also reset the network connection.  Rebooted it, used forget network and started over,  I did everything that Apple said and it still doesn't connect most of the time but my iphone 5c and my laptop works great on wifi.

  • HT204053 If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad

    If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad by getting it off my iCloud?

    She can't from iCloud without setting up your iCloud account on her phone. But just sync the same apps from your iTunes Library on your computer to her phone.
    Your wife should setup her own iCloud account - which is separate to the iTunes Store accounts.

  • All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store?

    All of my apple sets (iphone, ipad and computer) cannot connect the app store since yesterday, what's wrong with the app store? do you know? or do you have have the same experience?

    I still have access.  Must be your phone or your internet connection.

  • Apple TV is blinking and requesting to connect cable with itunes, why? I do not have the USB cable since it doesn't come with the Apple TV .

    Apple TV is blinking and requesting to connect cable with itunes, why? I do not have the USB cable since it doesn't come with the Apple TV .

    Hello folks
    I had the same problem today: Apple TV is blinking light and requesting to connect cable with Itunes (Itunes Logo appears)
    I solved the problem according Alley_Cat mentioned and described in link bellow:
    In my case, I restored factoring setting using a Micro USB Cable connected in Itunes
    Follow the steps carefully described in link bellow
    Good luck.
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • Apple TV drops WFI and will not connect

    I have two apple TVs.  I set them up and they connect to WIFI fine.  I come back some time later (days,weeks,month,etc.) and I cannot connect to internet.  I turn off wireless router for several minutes, restart Apple TV, and I still can not connect.  I do not have the option to connect to ethernet.  Is there something I can do to fix the problem and prevent it from happening over and over.

    Hi Dennis ..
    Try the troubleshooting steps mentioned here >  Wi-Fi: How to troubleshoot Wi-Fi connectivity

  • Very slow and erratic wifi connection

    My wifi connection is very erratic. Often when I am working online, my internet connection will suddenly be lost. When I look at my Task Manager, the Performance graph shows no activity and lists my connection speed at 0 Kbps. I often have to disconnect and reconnect, which sometimes brings it back, but not often. When my connection comes back, the Performance graph shows wild spikes. My laptop is the only computer working on wifi, and the router is not far from the laptop. I am also disappointed in my internet speed, even when working with a wired connection. It seems to be faster on weekdays, slower on weekends, and super slow in the evenings. Before I had Comcast, I had Verizon, and I never had any issues with wifi. Comcast was supposed to greatly improve my connection speed, but instead it has greatly diminished my internet speed and offers a terrible, erratic, and often nonexistent wifi connection.

    Thank you so much for your reply. Funny...Comcast never mentioned anything about speed depending on neighborhood density when they were luring me away from Verizon with promises of greatly improved internet speed. I now wish I had never left Verizon. I should have believed my friends when they told me how awful Comcast was. Thanks again for your reply.

  • Windows 7 no network adaptor and no WIFI connection

    My MBP A1286 was installed Windows 7 Ultimate 64bit in Superdrive by Boot Camp Assistant and without internet connection. It was completed successfully. WIFI has no problems with OS X Lion except that in Windows 7, There were a few drivers not found and cannot connect to internet with LAN or WIFI. The first important driver is Network Adapter which is missing and if resolved, then I can windows update and search for missing drivers.
    Please help.

    HI Bob n Beanbag,
    No where was mentioned the solution which I found out the long consuming hours of trials.
    1.  When using Boot Camp Assistant (BCA), ONLY internal Superdrive can create CD for Downloading Windows software. You cannot use external superdrive.  Since I did not create a CD then I have to redo BCA and select both option to burn CD and remove Win 7. Only then the CD is burn successfully. Next screen, do not proceed to restore MAC OS X (ie to remove Win 7).
    2. Reboot and press button "Option" to select and boot Win 7-64bit. Then serach in the CD folders and install the files manually so that the Device Managers icon are fully updated drivers (you can't get connected to internet: look into the folder Broadcom and install all the three 64-bits drivers, thereafter you are connected for Windows update.)
    3.  At Start/Run, type "Manage Wireless Networks" /Add /Manually create a Network profile. The information should be the same as the router WIFI settings. Tick also below two options. That's WIFI will be connected.

  • Lost iPod touch wifi connection

    I recently set up a wireless network with a laptop and a wired connection with a desktop from the same router. Initially we could connect our iPod touch to the network, now we can't .  Don't know why...using the correct key, passwords etc. Is there something in Network Magic that can help? we aren't able to add a device either!! Please help!!!!!!

    What is the model no of the  Wireless Router...?
    - Try changing the Wireless channel on the router
    - Also Change the SSID to unique name.
    - Make sure that the Mac Filtering is disable on the router.
    Now, check again...

  • I have an apple tv but lost the controller I connected my apple tv to my internet with an ethernet cable and it worked fine for the past week it has now stopped working

    id also like to mention that before it stopped giving me the option to use airplay on my iphone, i had disconnected my apple tv because it was in the sun while i was watching it, and a message popped up  saying "temperature: your apple tv is over heating. this message will dissapear when your apple tv is ready,"

    Take it in to Apple

  • Call phone and xfinity wifi connection problems

    My galaxy tablet works fine on Home Xfinity WiFi, but both Galaxy S5 and S6 cell phones get " Authenticatin error" with the very same correct password. We reset the modem a few time, reset phones many times - Still won't work.  3 trips to T-Mobile - phones will work with secured wifi at t-Mobile, but not xfinity!  HELP?!!!

    same issue here..
    reset my network settings and reset phone a billion times already, same issue still occur. sometimes the phone will wake up with wifi and sometimes it will go to 3g, one time it went to GPRS, its just really bizarre. If i open safari it will ask if i want to join the network that i originally set up, but when i select the network it just says "unable to connect". If i just leave the phone be for a couple hours and wake it up again, it will rejoin the wifi network.
    I use remote to control my music library, but if my phone goes to sleep, it won't reconnect again so it's basically useless.
    BIZARRRRRE, driving me crazy..

  • Apple TV dropping mirroring and losing internet connection on macbook

    Hi,
    I just got ATV and updated to the latest software version.
    I connected my macbook pro to ATV and started by streaming a show on my mac and mirroring it on my TV.
    1- I am noticing a slight delay and disconnection between the macbook and ATV.
    2 - After sometime the mirroring would stop and ATV goes back to homepage.
    3- Then if i try to use the ATV remote control on the settings page for example, the volume on my macbook would increase or decrease. As if it is still connected.
    Please help !

    seriously nobody has an answer for me?

Maybe you are looking for

  • Applet with swings

    Hi I developed a applet using swing componets.But it doesn't work. I used jdk1.3.1 for development.And I am using IE 5.0 and Netscape4.7 browsers. can any body help me what could be the problem? thanks

  • When is it best to use Local Classes..?

    Hi All,        We all know that a global class creation is very helpful wherein the class can be reused by multiple programs.In contrast when is it best to use a local class within the program...? Can anyone please share the sample scenarios where we

  • Maximum Approvers for PR release WF

    Hi All, For the PR Release procedure, the std workflow is customized and there is no Org structure for agent determination  the user who is creating the PR has to manually key in 4 approvers on the PR screen and the remaining 4 are determined using t

  • cm:search is not returning any result when logical operator '!' is used.

    <cm:search is not returning any result when logical operator '!' is used. I am using BEA 9.1 content management services API. When I run the following query I am not receiving any results. Also no error or exceptions are seen in the weblogic or cmspi

  • Weird message every few days or weeks

    Can someone tell me why I get this weird messages on my iPhone 4S with iOS 6.1.3? I get these messages sometimes once a week or once a month, one time I got 2 of them one after another. See the picture and tell me what it is and what should I do abou