Apple tv screen is too big

Why did my apple tv screen enlarge and how do I get it back to normal?

Check your TV settings.

Similar Messages

  • Apple TV Picture now too big for the 16/9 screen, wrong resolution ?

    Now that I've added a new Samsung Home Theatre system to my new Samsung 46" HDTV, the Apple
    TV picture is displaying way too big, cutting off about 1/2 the picture!?! The resolution seems to be set wrong ( 720 ?). The other inputs DVD and DirectTV display OK. I have the TV set for 16x9. It was working fine before I plugged the AppleTV into the new Home Theatre System. I then tried replugging the AppleTV directly into the TV's other HDMI port but the problem still remains.I can't find any way of readjusting the resolution. Any suggestions ?

    Problem solved. It's a faulty HDMI port on my TV.
    I have been plagued by intermittent random problems with my old Apple TV, especially where there was a blank screen but audio could be heard - solved by a restart. Then today I got the new Apple TV and it displayed as though there was overscan (actually - way more than overscan should cause now that I can see what it SHOULD look like). The final piece of the puzzle was trying to play content purchased previously on iTunes - no HDCP. Finally something pointing to the HDMI connection. I did a bit of troubleshooting - swapping cables, swapping HDMI ports and problem solved. Of the 3 HDMI ports on my TV - when the Apple TV is plugged into port 2 I get this massive overscan and HDCP doesn't work. In ports 1 and 3 it works perfectly. Thankfully the problem with the new Apple TV was consistent enough for me to easily diagnose the problem - unlikely the random nature of the issues I was having with the old Apple TV. Time for a new TV - hurrah! (it's under warranty...)

  • If my screen gets too big to use what do i do?

    Hi
    I would like to know how to fix my phone the screen has got too big for me to access it

    ok this is simple all you have to do is double tap it tap twice quite quickly in the same place hope this helps

  • My screens are too big

    I was doing something this morning and inadvertently made my desk top and other "window" too big to fit on the monitor.  I tried control - and that didn't work.  I restarted my computer and that didn't work.  Any ideas?

    Thanks.  I went into the discussion and found that if I hit the  command and options buttons at the same time as the 8 key I would turn off the automatic zoom.  That worked.  Thanks for your response though.

  • 30" display screen images too BIG

    I am aware of changing resolutions in the display area of system prefs.
    I have read that some people have this issue, that their computer does not go up to the resolution it needs. My screen is awesome... but it looks like I am looking at everything through blurry magnifying glass.
    I bought it for my macbook pro, that has not arrived yet, so I am using it with my (older) G4 and the resolution only goes to 1280 x 800, I did order the dvi to video adapter for the for the macbook, but will this resolve my issue on this computer? If not, is there any sort of adapter cable I can get, it will be awhile before I purchase another computer... so I'd like to make this work for both. Thank you.

    So there is no adapter I can get to use with it? I kind of figured that once I went through everything.... to bad apple doesn't inform people of that before such a purchase!!!! On the description it says "PowerBook G4 with dual-link DVI support", so I bought a cable.... I am not a techy, so this should be made REALLY clear for a monitor that is just under $1800!

  • I get an error message when trying access a site, it says my screen is too big or wide. I have los my back arrow as well.

    I get an error message from Yahoo stating my screen infor is too wide , I have also lost my back arrow/

    Please do the following:<br><br>
    #Update Firefox via this link: [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.19]<br><br>
    #Update Java via http://www.java.com/en/
    If the problem persists after you update, please post again.

  • My screen is too big,how do i get it back to regular size???, my screen is too big,how do i get it back to regular size???

    how do  I shrink my screen back to normal size??It is huge!!!!

    Hold down the Control-key and scroll down with your mouse.
    Additionally go to System Preferences -> Universal Access and disable/uncheck the Zoom feature.
    Stefan

  • Fill the screen is too big

    When I zoom to fill the screen the window expands under the layers panel.  Is there a way to to make it stop at the panel and not under it?

    You have a few solutions for your issue:
    1. If you're unsure about docking, on the top right hand side, you can 'Reset' your workspace.
    Photoshop > Window (on Menubar) > Workspace > Reset (Essentials) or whatever workspace you're currently on.
    If you have custom panels open in your workspace, you may want to 'Save' your workspace before 'Resetting' to a system preset. Resetting to 'Essentials' will dock all panels by default.
    2. Change your Screen Mode by pressing 'F' key while you're in Photoshop with your document open. This will toggle through 3 screen modes that PS has. The first 'F' press will go to Full Screen with Menu Bar. The second F press will go to Full Screen only (all tabs/ panels hidden).
    3. Press 'Tab' key when your document is open. This will toggle toolbar & panels on/ off. Press 'Tab' again to bring them back.
    All 3 solutions will let you work on your canvas without having to worry about a panel hiding your canvas/ work area.

  • I did something that changed my viewing screen and cannot correct it. It ssems that my screen is too big for the monitor. Ihave a lot of blank space on the left side and cannot view my side slide bar on the right side-how can i adjust the screen

    the viewing screen is off center -govong blanck space to the left and not allowing me see the slide bar on right

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Iphone 6plus stuck in zoom. Cannot put in passcode because screen is too big. cannot reset to factory settings because I need to login passcode.

    I have an Iphone 6 plus which is stuck in zoom mode.  The screen is to large for me to put in my passcode so I can try to fix the problem. I was going to reset the IPhone on ITunes but it wouldn't allow me to do that without inputting the passcode into the iPhone. How can I get the IPhone out of zoom mode?

    Double-tap the screen with THREE fingers. Then go to Settings/General/Accessibility and turn off Zoom.

  • My screen is too big. It cuts off pages. how do i fix it. I used ctrl and alt at the same time it did not fix it.

    Like if i get on facebook i can only see haft of the page. i can not see any thing to the left or right of the page

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • My Quicktime Player Screen Recording File is too big

    Whenever I record a video it is too big. To test it out I recorded a 3 second video and it was 5mb. Please help I really want to screen record.

    Too big for what? Can you record a full session without the Mac freezing or locking up?
    You can record the file & recompress it afterwards to make it use less storage size if you want.
    Evom is a simple tool for simple video converting …
    http://thelittleappfactory.com/evom/
    Or you could probably use Screenflow (or iMovie) if you need complex editing etc…
    http://www.telestream.net/screenflow/overview.htm
    Handbrake is another (free) option for compressing & converting video.
    http://handbrake.fr/
    Just be aware that if the video is tiny it may be impossible to see what is going on, make sure your display settings make things big enough when you capture.

  • Text/icons/window/ALL too big!  Help please

    I'm brand new to the world of mac and have little experience troubleshooting. For whatever reason, only God knows, all that i view on this screen is too big. i tried changing the resolution, restarting, EVERYTHING in system utilities, command + scroll (for zoom) and nothing seems to work.
    Any help would be great!
    thanks

    Thanks Poikkeus but it doesn't seem to be a resolution issue. I've tried all options in res and nothing seemed to work. The dock size hasn't changed, but all else is enlarged. The toolbar text, the windows when I open them. In fact, they're so big that I can't see all the information on a window when it's open.
    Any other ideas?

  • The text in my toolbars is too big?

    The text on the toolbars at the top of the screen are too big. It causes the toolbar to take up too much space. Is there anyway to shrink the text?

    Use this for the user interface:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  • I am using my first apple product, mac book pro.  somehow i FIGURED OUT HOW TO INCREASE THE FONT FOR SEARCHES AND WEB PAGES, BUT THE FONT IS TOO BIG AND FOR THE LIFE OF ME I CAN NOT FIND WHERE TO GET THE SCREEN BACK TO NORMAL, HELP ANYONE?

    I am new to Apple, somehow I figured out how to make font of Web pages bigger, but it is too big and I can't use sites properly.  for the life of me I can not how to get my font size reduced.  Help anyone? thank you, sbb

    Probably command-minus will do the trick.

Maybe you are looking for

  • How to send dynamic flv video to video control

    Hi i put a looper in my page and inside it i click insert->media->flash video and the window appeared and i try to make the flv dynamic i mean by code and i found that it needs to specify a specific flv file !!! no parameters button to specify dynami

  • Function module In Update Task is called more than once

    Hi experts!! I had a requirement to Create a Customer ( i will call it B) when another Customer (A)  is created (ON SAVE). I used a Badi to implement the requirement, and inside my Badi i have 2 Function Calls in Update Task. The first one to create

  • Successfully scheduled report shows error

    Hi, I have created a report with direct connection to oracle and uplaoded it to BOXI, then I scheduled it successfully, but when i click on the instance it shows me the following error. "Your request could not be completed because a failure occurred

  • Mavericks and Screen Size

    I just downloaded Mavericks to my Mac Book Pro, and my screen content is much smaller.  Yes, I see more on the screen, but it's so small that it's hard to read.  How do I enlarge/zoom permanently?  I've looked everywhere in System Preferences and can

  • Settings of JDeveloper 11.1.1.2.0 editor

    Can I disable the auto-popup Javadoc that shows the following entry dot? Only Javadoc window, not completion auto-popup. Тhanks! Sorry, my bad English. You understand me?