Apple TV set up on network

Hi,
I have an Intel Mac connected via ethernet to a BT Home Hub. Having just bought an Apple TV I would like to create a network for my Apple TV to join and start syncing with iTunes etc.
My question is how do I set this simple network up? Do I use Airport or do I network via the wi-fi of the home hub?
Any help appreciated as I am very confused!

I don't know much about the BT device.
The ATV does not function as a normal router , it works in conjunction with a router. It could also work without a router. All depends upon what is set up within your household.
"like to create a network for my Apple TV to join and start syncing with iTunes etc." You could start by connecting an Apple Extreme or TC router then either by ethernet or wireless connect the ATV. I use ethernet because it is much more reliable and faster than wireless especially for streaming movies.
I'm sure you'll get more advice on your request; there are many alternatives on how to actually use ATV.

Similar Messages

  • Where is the hyphen (-) on the apple TV?  I am trying to set up my network and there is a hyphen in the password for the network

    Where is the hyphen on the apple TV?  I am trying to set up my network and there is a hyphen in the password for the network

    A few options to try:
    They hyphen should be next to the + on the character map.
    If you are still having issues, provided your ATV software is up to date, you can now connect an Apple Wireless Keyboard through bluetooth connections.
    Change your network password so it does not use a hyphen
    Good luck!

  • TA38556 I am trying to set up my apple tv using the hospital network. I am able to detect the network and chose it. But the way the system works is that you have to agree to the terms and conditions of using their network. How do I accomplish this with ap

    I am trying to set up my apple tv using the hospital network. I am able to detect the network and chose it. But the way the system works is that you have to agree to the terms and conditions of using their network before access the internet. How do I accomplish this with apple? Please help.

    There are some other options to you, if you're not at home and nobody is using your router you could set it up at the hospital, if this isn't an option you could get a second router and use it.  Many ethernet routers are available on the cheap, and ethernet cables are cheap too.
    Also, a macbook can share it's internet via the built in wifi it has.  See this go to settings-sharing-internet sharing and configure as desired.  This may require an internet connection via ethernet.  But you should be able to create a wifi network for using something like airplay/home sharing.

  • How to connect an apple tv to an enterprise network with a username and a password?   I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

    How to connect an apple tv to an enterprise network with a username and a password?
    I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

    Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

  • Multiple Apple Tv's sharing same network but in separate rooms

    Hi,
    I currently have an apple tv set up in my home theater room but would like add another atv in my bedroom.  Is it possible to have multiple atv's sharing the same wireless network.  Would this idea workout?
    thanks

    Yes, no problem at all. You can add as many as you want.
    Every Apple TV has it's own unique MAC adress and will get it's own IP adress on the network.
    You can even give every Apple TV it's own unique name.

  • I just purchased the airport Express to use in hotels while traveling to create a wireless network from the hotels wired dsl.  A friend said to set up the network from home prior to traveling.  How do I set this up?  Thanks.

    I just purchased the airport Express to use in hotels while traveling to create a wireless network from the hotels wired dsl.  A friend said to set up the network from home prior to traveling.  How do I set this up?  Thanks.

    In addition to RyanJC's comments, the 802.11n AirPort Express Base Station (AXn) can store up to five different http://docs.info.apple.com/article.html?artnum=108081 configuration profiles. You will need to use the AirPort Utility to create & save these profiles.
    To create a new profile:
    Open AirPort Utility, select your AX from the list, and then, click "Manual Setup."
    From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
    Click "+" to create a new profile; give it a name, and then, click OK.
    Set options, such as network name, passwords, Internet connection method, etc.
    When done setting the options, click Update.
    To switch profiles:
    Open the AirPort Utility, select your AX from the list, and then, click "Manual Setup."
    From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
    Click on the desired profile, and then, click OK to apply the new profile and restart the AX.
    Just remember to switch to the desired configuration profile before removing power from the AX.

  • I want to set-up a network with our current two laptops for a family of 4 w/unique 4 profiles. I'd like everyone to be agnostic about which computer to log into and use but still have private docs and apps (i.e.mail/facebook). How best can I do this?

    I want to set-up a network with our current two laptops for a family of 4 with unique 4 profiles.  I'd like everyone to be agnostic about which computer to log into and use but still have private docs and apps (i.e. mail/facebook).  How best can I do this?

    iCloud Photo Sharing FAQ - Apple Support
    http://www.fatcatsoftware.com/iplm/Help/accessing%20an%20iphoto%20library%20on%2 0another%20mac.html

  • A few questions about setting up a network drive

    Hello,
    I have been trying setup a private server on my home network. I have a Netgear WNDR 3800 and have been trying to hook up my 2TB external drive to the router.
    I have been trying to decide how I want to format the drive, and how many partitions I should use.
    The reason I have a 2TB drive is because I needed a work space to create a image of a corrupt 500GB drive. The 500GB drive had my entire digital life on it, and it was almost lost. I dont want to encounter the same issue with a 2TB drive because at that point I feel like any issues would make it difficult for me to recover the data due to work space size issues. This is why I am thinking about using several partitions, but I am not sure what issues this might present.
    As far as format goes; the router says it supports read/write with FAT 16/32, NTFS, EXT 2/3, and I know it works with HFS. Here are the things that I am trying to do with the drive. (in order of importance)
    Use it as a Time Machine backup location for 1 possible more MBP's
    As a media sever to stream downloaded movies and music to A/V reciever (Pioneer VSX-822)  and possibly other devices on the network
    Act as a temporary storage location to swap files between devices or operating systems
    If possible not keep media on my computer and stream it from the network drive when I am home
    And, thats all I can think of right now. If there is something else useful I am missing that would need special attention in setting up a network drive let me know.
    So, I have had no problems getting the drive to connect and show up on the network when I use HFS. I have also been able to get multiple partitions to show up; been able to back up to different partitions; including time machine on one partition.
    So here is where I am running into problems; the router bios allows you to enable a media sever. I believe the router tries to do something with DLNA. DLNA I believe allows for a similar functions to airplay and cloud for basically all compatible non apple products. I dont care if I use DLNA, or Airplay. I just want to be able to access my music library over the network without having to have my computer open, or my iphone on me..ect.
    So I was wondering if anyone could help me out, or if there are any articles I should look at that I might have missed while I have been researching.
    Edit: I am sorry if this is posted in the wrong section, I figured the best people to ask about filesystem compatability and ease of use was going to be the System software section

    Hello,
    I have been trying setup a private server on my home network. I have a Netgear WNDR 3800 and have been trying to hook up my 2TB external drive to the router.
    I have been trying to decide how I want to format the drive, and how many partitions I should use.
    The reason I have a 2TB drive is because I needed a work space to create a image of a corrupt 500GB drive. The 500GB drive had my entire digital life on it, and it was almost lost. I dont want to encounter the same issue with a 2TB drive because at that point I feel like any issues would make it difficult for me to recover the data due to work space size issues. This is why I am thinking about using several partitions, but I am not sure what issues this might present.
    As far as format goes; the router says it supports read/write with FAT 16/32, NTFS, EXT 2/3, and I know it works with HFS. Here are the things that I am trying to do with the drive. (in order of importance)
    Use it as a Time Machine backup location for 1 possible more MBP's
    As a media sever to stream downloaded movies and music to A/V reciever (Pioneer VSX-822)  and possibly other devices on the network
    Act as a temporary storage location to swap files between devices or operating systems
    If possible not keep media on my computer and stream it from the network drive when I am home
    And, thats all I can think of right now. If there is something else useful I am missing that would need special attention in setting up a network drive let me know.
    So, I have had no problems getting the drive to connect and show up on the network when I use HFS. I have also been able to get multiple partitions to show up; been able to back up to different partitions; including time machine on one partition.
    So here is where I am running into problems; the router bios allows you to enable a media sever. I believe the router tries to do something with DLNA. DLNA I believe allows for a similar functions to airplay and cloud for basically all compatible non apple products. I dont care if I use DLNA, or Airplay. I just want to be able to access my music library over the network without having to have my computer open, or my iphone on me..ect.
    So I was wondering if anyone could help me out, or if there are any articles I should look at that I might have missed while I have been researching.
    Edit: I am sorry if this is posted in the wrong section, I figured the best people to ask about filesystem compatability and ease of use was going to be the System software section

  • Unable to set my Wifi network!

    I just got my my first airport extreme router last evening. I have been struggling to set it up as an extender with my existing Netgear Wi-Fi router, for which I have have had to attach it to my net gear router through ethernet cable. However, after I am able to set it up, the moment I disconnect the ethernet cable, it goes off line and the airport utility stops recognizing it.
    I really do not care if I set it up as a bridge or as a new connection. The idea is to set up separate network for my Apple products and to boost the signal strength.
    Please help. Thanks.

    Both of these gentlemen assured me that this was the best product.
    I am sure that they meant well, but unfortunately both gentlemen were wrong in their advice.  It would have only taken them a few seconds to pull up the product information on the AirPort Express.
    Would you by any chance have an idea if Airport Express would also not be able to serve the purpose?
    The AirPort Express cannot do what you want.
    A simple look at the product literature for the AirPort Express will confirm this for you:
    Extend an existing Wi‑Fi network’s range.
    If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, AirPort Time Capsule, or another AirPort Express
    http://www.apple.com/airport-express/

  • I am getting an un expected error message when updating the setting to "extend network".  Is there an obvious setting I may be missing?  Cisco router being used.

    I am getting an un expected error message when updating the setting to "extend network".  Is there an obvious setting I may be missing?  Cisco router being used.

    If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
    It is extremely unlikely that this will work with a Cisco router.
    If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way.

  • HT1595 Trying to connect my new apple tv to the wireless network. When I try to use the remote, the Apple TV doesn't respond (doesn't go to the next screen). Could this be caused by a weak wireless signal?

    Trying to connect my new Apple TV to the wireless network. When I try to use the remote the Apple Tv doesn't respond ( doesn't go to the next screen). Could this be caused by a weak wireless signal?

    It is not properly connected to the network.
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    Try ethernet
    Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

  • Set Static (Persistent) Networking Route

    I've been pouring over the internet looking for a solution to my problem. I am very new to Apple and am attempting to access an AS/400 system at my work. I have the documents on how to set it up properly in a windows environment but nothing for a Mac and my corporate support doesn't 'do' macs.
    Basically I need to set a static network route. The Windows command looks like this:
    route add -p 42.0.0.0 mask 255.0.0.0 42.242.80.193
    How can I get this working on my macbook pro? Please be gentle as I'm as green as they come!
    Thank you in advance for any assistance you may offer.

    Open the Terminal app and type in *man route* for instructions on using the route command
    Or search Google for the Unix route command

  • AT&T U-Verse and Apple TV set up problems

    I can only get my Apple TV to the join network screen. I put in my network password and get an error "There was a problem connecting to the network. There was a problem with your network connection. Check your settings and try again. (-6)"
    I have the Apple TV connected to Samsung 850 via HDMI.
    I know the password is correct as I have my MacBook and IPhone wireless. Are there settings on the Residential Gateway that need to be made in order for the Apple TV to join?

    I wish I had more choices for Broadband isp'd in my area but ATT is it, except for paying 3 times as much, but
    I doubt that has anything to do with issues around setting up your Apple TV, because it works for me. I was  thinking the kind of TV, and then I read you descrition again. Apple TV should work for you, unless some setting is wrong getting the signal from your computer/and or broadband to the Apple TV device. Don't give up, there is a solution. What kind of Computer are you using and Whats your OS?

  • Can't set up a network folder with a Hp laserjet M400

    I'm trying to set up a network folder on my TimeCapsule so the scannner sends them there right away, I can't get the scanner to find the folder i've created. it just say "can't find the remote server". Any suggestions?

    Is the scanner setup on a network connection?
    Are all the names in the TC SMB compatible.. ie Short, no spaces and pure alphanumeric.
    Any device not using AFP protocol will find Apple names.. long, spaces and strange characters difficult.

  • Apple TV unable to join network without creating a profile.

    I am trying to connect my Apple TV to the WiFi network at my university. There are several networks. When I try to connect to the main network which I connect my laptop to, it says I must create a profile. I followed the steps on the Apple TV support website to create a profile but it was unable to be installed on my Apple TV because of two errors which said that it was unable to activate the profile. When I try to connect to the other two networks, it says that the connection is successful but is unable to set the date or time and is otherwise unable to perform any functions that require internet. I am not able to restore my Apple TV because it says I need to install the latest update first, which requires internet connection. I have tried resetting the Apple TV multiple times.

    If the school network requires login via webpage then that will not be possible. You will need to speak to the IT dept in order to get onto the network.

Maybe you are looking for

  • Combobox skinning

    Hello guys, I'm trying to work on a ComboBox, that looks like one from Word or Excel 2007. Therefore I need to be able, to skin the ComboBox list, that opens, whenever I click the ComboBox. How do I do this programatically? I just can change it, when

  • CProjects Resource staffing problem

    Hi Everybody,                       Right now we are facing a problem while staffing a resource for a role created. I am getting a error saying "Enter a valid business partner" and "Message was caused by reference object 'Business Partner Link'". Wha

  • Compare Date in Expression Builder

    Hallo, I'm trying to build the following sql: select * from (select * from TABLE1 where CODE =#myCode AND EFFECTIVE_DATE <=#myDate AND EFFECTIVE_DATE >= ADD_MONTHS(#myDate,(-1)*#ageMaxMonth) ORDER BY EFFECTIVE_DATE DESC ) WHERE ROWNUM < 2 Vector args

  • BAPI Required to post GR in EBP System( SRM4.0, Classic Scenario)

    Hello All,   We have SRM4.0 with classic scenario with non-sap backend system. We need to post GR in EBP system automatically.   could you please tell me the BAPI required for this? Regards Neelesh

  • Reabte agreement processing

    hello friends, i am working on Rebate agreement i am able to process the credit memo and also do the partial settlement-R3 (B3 inovice), i have a question here does our job end when we do the prtial settlement doc-R3 and do the B3 invoice or we have