Apple TV. setting network time

MMy school's wifi network demands that I log in before using, and Apple TV tries to set network time before I log in. How can I set network time after I log in to the network. I don't seem to see a menu item for this.

Apple TV cannot set the network time + date

Similar Messages

  • Apple TV is asking me to set network time. how to do this?

    Apple TV is asking to set network time. How is this done?

    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Unable to set network time and date

    My Applet TV2 is unable to set the network time and date making it so I cannot login to my itunes account so not Netflix or anything making it pointless. I have tried adjusting my router settings (although I've used the same router for over and year and this just started randomly) I have ensured Port's 123 are open, I've restored the ATV2 4 times and have reset my router. I've seen links showing how to use SSh to set the time but I'm unsure if that will work. Any help is appreciated as I'm at a loss at this point

    Welcome to the Apple Community.
    Of the things I've seen work for people in the community you seem to have done most of them, but did you try these.
    Restart Apple TV by removing ALL the cables for a moment or two.
    Ensure that the DNS address's used by the Apple TV and the router are the same and are the address recommended by your ISP.

  • Set network time via script or terminal command

    Hi
    We are trying to set our computers to the network time at login.  We tried modifying the MCX time via workgroup manager but that did not work.  I have used my old script/command I used for 10.6 to set our 10.8 machines to the network server but it says command not found.  Been googling to find a command/script that works for 10.8 but so far unsuccessful finding a solution. 
    This is the script/command I used:
    # Set time zone and time server.
    $systemsetup -setusingnetworktime on
    $systemsetup -settimezone America/New_York -setnetworktimeserver time.apple.com
    Any suggestions would be greatly appreciated!
    Cheers

    Why does having the System Preference in Date & Time set  to automatically set the date and time from the Apple servers not work for you?

  • HT202157 setting network time and date

    What are the issues involved in setting the time and date on AppleTV?   Is this a network issue?

    P.C. was mentioned earlier so I will jump in and assume Windows....
    If the system is (made) a member of a Window administrative domain then all this is already in the box, and should be part of a well managed system (I have managed it on a workgroup as well, see the articles below for details). It's one of the things I try to promote as we often have systems switched on for hundreds / thousands of hours and knowing when some guy accidently switched it all off is realy usefull It helps with problems / events that occur outside our control and assists tracking down problems and stops drift / skewing of data.
    Check out the following articles for more information: -
      Basic Operation of the Windows Time Service
      http://support.microsoft.com/kb/q224799/
      Registry entries for the W32 TimeService
      http://support.microsoft.com/default.aspx?scid=kb;en-us;Q223184
      Windows 2000 cannot set the correct time when it connects to multiple NTP servers
      http://support.microsoft.com/?id=837196
    The time service is included on Windows XP as well. For NT4 there is / was a toolkit that allows operation from Microsoft.
    Use the command NET TIME /? (on W2K and XP)
    Either way you will come accross problems at the firewall if you want to get to an external time source. Unless you have on of those nifty little black boxes that pick up a radio signal from one of the available time sources.
    I like Dennis Knutsons idea because you can't always get IT's attention, sometimes they need a little help, thanks again Dennis for another good tip.

  • How to set network time

    How to set network time

    You can't set it manually, it requires access to the internet server in order to do so. It is currently having trouble connecting; make sure location is set correctly via settings, DNS should be set to automatic (settinga - general - network), ensure port 123 is open on your router. Router needs to be up to date, reboot ATV and router.

  • Why is my apple tv unable to set network time?

    How do I get it to correct this? I have rebooted ATV and also my router (which I unplugged everything from the router). I recently had a long term power outage in my area. (5 days)

    wiremup wrote:
    Why is my apple tv asking to be connected to iTunes via a cable when I was updating software? It went through step 1 and then a picture of the iTunes logo and a cord came on screen. Help please
    Yikes the exact same thing just happened to me when updating my Apple TV just now.   It's totally bricked.    Did you find a fix?
    Dave

  • Apple TV setting date/time

    I have been waiting for an hour for my apple tv to set the date and time, but it still isnt doing anything. Any suggestions?

    It is having trouble connecting to the network. Make sure location is set correctly. DNS should be set to automatic (settings - general - network). If on wifi try ethernet. Reboot ATV and router.

  • HT4367 still trying to set network time

    ok did restoring software didn't work. Any other ideas folks?

    As I knew I would, I am regretting buying another Apple product (should have leant my lesson with the iphone). Have an ATV2 and cannot set time and date. Spent hours and hours on it and completely fed up. So many people experiencing this issue in the forums as well.
    Fix anyone please? Close to thowing it in the same bin the iphone is in. How difficult can it be to roll out a product where ntp works?

  • Can't set network time on SBS 2011 Server

    I'm trying to sync the time on an SBS 2011 server to an external source, as it keeps drifting by 2-5 minutes a week.   But I can't even run a NET START W32TIME without getting the error below - which I don't really understand.
    C:\>net start w32time
    System error 1290 has occurred.
    The service start failed since one or more services in the same process have an
    incompatible service SID type setting. A service with restricted service SID typ
    e can only coexist in the same process with other services with a restricted SID
     type. If the service SID type for this service was just configured, the hosting
     process must be restarted in order to start this service.
    I get the SAME error trying to start Windows Time manually in Services - it is not running.
    Anyone?    Thanks.
    Bill

    Hi Bill:
    Have you tried this?
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/windows-time-service-will-not-start/6bbea43f-5575-4e78-9b52-ac766632bfc2
    I know it says Telephone service in the answer, but it appears to have resolved the time sync problem.
    There is also a thread where simply changing the host the time service queries fixes it.
    Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

  • HT4367 APPLE TV3 Network Time missing

    Please, First time I've got my Apple TV and it's being working fine since March 2012 when iI bought it....until now cause like many of you when downloaded Software 5.1 now can not set Network Time, adjust, etc. How long last the warranty ??? thanks.

    Here's what finally worked for me with Apple TV 3rd generation. Out of the box, when setup with wi-fi, it breezed through without any issue. As soon as I powered down and connected it to another tv (same wi-fi network), it got stuck at setting date/time. The remote would help in getting out of it, but the home would only have "Computers" and "Settings" and pretty much useless except for AirPlay. Here's what I did to resolve this:
    1. On your main router, temporarily disable the firewall or set it to the lowest setting allowable (a reboot of the router maybe required).
    2. Restart apple tv via the "restart" option in the "General" option in the main settings menu.
    3. It should breeze through and not show the "Setting date/time" screen.
    4. Once it loads up properly, turn on your fire wall as before  (a reboot of the router maybe required).
    I think it worked for me out of the box, but auto-update to the latest software introduced this bug. So, everytime apple tv tries to synch with the time server, this issue will come back. To disable this, I turned off the "auto time synch" option in Settings -> General.
    I am fairly confident that I'd be able to use steps 1 through 4 anytime this recurs. Possible scenarios causing recurrence of this issue:
    1. Unplugging the power to apple tv or power failures.
    2. OS updates.
    3. Restoring apple tv using "Restore" or via micro-usb and iTunes to the lastest OS.
    Hope this helps. Please post if this works for you.

  • HT204400 my apple tv show "apple TV can't sign in to the itunes store until the network time has benn set."

    my apple tv show "apple TV can't sign in to the itunes store until the network time has benn set."... what is the network time ? how i resolve this?

    Ronaldo, I'm also in Brazil... It seems to be a problem with us... I've been searching the internet and many people have the same problem.
    I also have a thread open here... If you find a solution, please answer it here so that we can share.

  • Message reads Apple tv cannot sign in to Itunes until network time has been set; please try again later...help!

    in setting up new apple tv, message says "apple tv cannot sign in to Itunes until network time has been set - please try again later.........is this an easy fix?

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Can't access itunes store or home sharing on apple tv, apple tv 2 keeps saying that network time needs to be set.

    Cant acess itunes store or home sharing on apple tv 2, keeps telling me that network time needs to be set. When I go to time zone section on apple tv - I chose a city...but still no luck. Apparently, can't do anything without the time being set. How do I set this up?

    Yes, I did (turning off and then on again is a way of life for any windows user!). Actually, through a process of trial and error I have fixed the problem although I'm not very comfortable with the fix. For some reason, the OS X firewall is to blame. By relaxing the firewall settings to their most lenient, the iTunes store is now fully accessible via iTunes, and so is the whole of the apple website. Another added side effect has been that general web browsing is now lightning fast.
    I'm therefore left with the (temporary) conclusion that my iMac's internal firewall is only capable of blocking access to the web resources of the people who created it, and slowing my web browser to a crawl.

  • HT1595 What do you do if the Apple TV cannot set the network time automatically?

    What do you do to set the network time so Apple TV can set up the Apple account?

    Hold down the shift key at reboot, see if that gets you in, if it does then start at #7
    "Gray Screen with spinning gear" type issues (can also be white or blue screen)
    Step by Step to fix your Mac

Maybe you are looking for

  • ISSUE: InDesign document automatically creating "imported" paragraph styles when you open the Layout.

    Hi I have an InDesign layout that contains multiple boxes, which all have style sheets applied to them. There are a lot of unused styles on this layout too so these have been organised into folders. When I close it and re-open the document, it create

  • How can I record a video with LAbview?

    Hi, I have a question: How can I record a video with labview? I have a camera (AXIS 221) connected via rj45 on PC. I see the video of the camera in a browser. And I would to acquire the video in labview. Could someone help me? Thanks Raf

  • How can I import into iMovie?

    I have a Sony Handycam DVD653E which records onto mini discs. On my old computer (non Intel) which ran Tiger I could download videos directly via USB into my iMovie, but that doesn't work anymore. I have a friend with a nonMac computer who can downlo

  • My 2nd gen. ipod became corrupt, how do I reformat and restore it?

    I had my i pod working and tried to take the songs out and put new ones in. Then a error message came up saying my i pod was corrupt. Some how I lost everything and now I don't know how to get anything back into my PC so I can reprogram new songs int

  • SCCM Console crashes on edit membership

    My SCCM Console keep crashing on me when I try to edit memberships on an update in the software updates. I have this happen on two different servers that this use to work on perfectly fine on about a month a ago. I havent had a need to do this since