Apple TV setting not allowing for Multi-pass
Can someone tell me why I cannot select Multi-pass in the Inspector when trying to output to the Apple TV device? I can choose it with the iPod settings, but loose it as soon as I change to the Apple TV.
I believe it's by design - the folks at Apple probably think that, with the higher data rate allowances of tv, folks wouldn't need multi-pass since you're not crunching the video down so much.
That's only my theory, and if it's true, it's valid up to a point, but it would still be nice to have the multi-pass option.
Are you not getting good results with your tv encodes?
Similar Messages
-
SET CHAINED command not allowed within multi-statement transaction
Hi,
i need to do one transaction and i am setting autocommit(false) and
once i am don ewith my 2 inserts i am settins it to true.
i have like 20 thousand rows and when it is working fine for some inserts but after that it is throwing
"SET CHAINED command not allowed within multi-statement transaction".
can anyone please help me.You can find some information here:
http://publib.boulder.ibm.com/infocenter/wsphelp/index.jsp?topic=/com.ibm.websphere.nd.doc/info/ae/ae/rtrb_dsaccess.html
it's first problem for sybase DB -
Sybase: SET CHAINED command not allowed within multi-statement transaction
Hello,
I'm getting the error message "SET CHAINED command not allowed within
multi-statement transaction" for CMP Entity beans against Sybase.
The errors appear in my jdbc.log in this order:
010SM: This database does not support the initial proposed set of
capabilities, retrying.) SQLState(010SM)
JZ0EM: End of data.
JZ0SJ: Metadata accessor information was not found on this database.
Please install the required tables
as mentioned in the jConnect documentation.
010SL: Out-of-date metadata accessor information was found on this
database. Ask your database administrat
or to load the latest scripts.) SQLState(010SL)
SQLState(ZZZZZ) vendor code(226)
com.sybase.jdbc2.jdbc.SybSQLException: SET CHAINED command not allowed
within multi-statement transaction.
I'm using JConnect 5.5, WebLogic 6.1 sp3, Solaris 8, and Sybase 11.
The weird thing is, the app works on a box running 6.1 sp2 and Win2k
Prof.
Any ideas?
Thanks!
DanHi Dan,
There is a patch for this sybase problem, please contact [email protected] to
get a temp patch.
sree
"Dan Blaner" <[email protected]> wrote in message
news:[email protected]..
Hello,
I'm getting the error message "SET CHAINED command not allowed within
multi-statement transaction" for CMP Entity beans against Sybase.
The errors appear in my jdbc.log in this order:
010SM: This database does not support the initial proposed set of
capabilities, retrying.) SQLState(010SM)
JZ0EM: End of data.
JZ0SJ: Metadata accessor information was not found on this database.
Please install the required tables
as mentioned in the jConnect documentation.
010SL: Out-of-date metadata accessor information was found on this
database. Ask your database administrat
or to load the latest scripts.) SQLState(010SL)
SQLState(ZZZZZ) vendor code(226)
com.sybase.jdbc2.jdbc.SybSQLException: SET CHAINED command not allowed
within multi-statement transaction.
I'm using JConnect 5.5, WebLogic 6.1 sp3, Solaris 8, and Sybase 11.
The weird thing is, the app works on a box running 6.1 sp2 and Win2k
Prof.
Any ideas?
Thanks!
Dan -
The operation is not allowed for result set type FORWARD_ONLY
Hi,
I am trying to use scroll insensitive resultset in following manner-
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
ResultSet rs = stmt.executeQuery("some sql here");
rs.last();
but the rs.last() throws this exception-
com.sap.dbtech.jdbc.exceptions.SQLExceptionSapDB: The operation is not allowed for result set type FORWARD_ONLY.
at com.sap.dbtech.jdbc.ResultSetSapDB.assertNotForwardOnly(ResultSetSapDB.java:2725)
at com.sap.dbtech.jdbc.ResultSetSapDB.last(ResultSetSapDB.java:557)
Database version: Kernel 7.5.0 Build 019-121-082-363
Driver Version: MaxDB JDBC Driver, MySQL MaxDB, 7.6.0 Build 030-000-005-567
This used to work with 7.5 version driver. Why this is failing with 7.6 driver, any clues?
Thanks,
VinodHi Vinod,
due to performance improvement when using forward only cursor we changed the default for the resultset type from TYPE_SCROLL_SENSITIVE to TYPE_FORWARD_ONLY starting with JDBC driver version 7.6. So I guess the exception comes from a statement where you didn't set the resultset type while creating it. Please check if all of the statements that you want to be scrollable have set the correct resultset type.
Regards,
Marco -
Set type COMM_PR_UNIT is not allowed for product type
Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
Set type COMM_PR_UNIT is not allowed for product type
What can I do? I think that is an ABAP problem
Thanks in advance
Rosa RodríguezRosa,
This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
Thanks,
Jagadish -
I tried to update, but my apple ID does not allowing me , always giving me 'Your device or computer could not be verified. Contact support for assistance '. I changed my apple ID passwords, still same. help me please
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Log out, log back in, and test. If there's no improvement, continue.
Step 2
Reset your computer’s PRAM. -
Rules are not allowed for jobs with set 'archive edited messages only' flag.
Hi,
We are on AEX 7.4 and have enabled user defined search and also setup archiving. Even though the retention period has expired but still the messages are not being
archived.
We see following issues:
1. Unable to setup archiving rule in Runtime Work Bench, we are getting following error:
Rules are not allowed for jobs with set 'archive edited messages only flag.
2. Unable to set the expiration of messages using the following link.Each time we specify the number days it shows the same number of
messages expired.
http://XXXXX:50000/MessagingSystem/job/reorgdb.jsp
3. However if we click on "remove messages" button the messages are getting deleted which tells me that the messages are not matching any
archiving rule hence are being removed.
Any pointers to the above issue are appreciated!!!
Thanks,
RajeevHi,
Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
Also check this
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
Regards,
Naveen. -
I cannot sign-in to FaceTime. My apple password is not accepted for setting up FaceTime. Can someone help how to setup FaceTime
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom -
Qmaster useful for multi-pass encoding?
The Compressor manual cautions several times against multi-pass submissions:
But with two-pass VBR and Multi-pass encoding, each segment is treated individually so the bit-rate allocation generated in the first pass for any one segment does not include information from the segments processed on other computers.
This would imply that Qmaster is not worthwhile on multi-pass processing. Exactly what does this warning mean?
G5 Dual 2GHz Mac OS X (10.4.8) 2.5GB RAMMulti Pass encoding means it looks at the media once before it encodes, and looks for the best place to put key frames, VBR is Variable Bit Rate and means that complex frames (like tree leaves blowing in the wind) get to use a higher bit rate then less complex frames (like talking heads in front of solid colors).
In the realm of Qmaster, if you allow Job Segmenting in your Multi-pass VBR setting, then each node will get it's own chunk (or segment) of the movie to work on, and will not be aware of information about other segments. Thus complex frames in a given segment can only "borrow" bitd from less complex frames in that same segment, and each node will do 2 passes only on it's segment, so in theory this misses optimizations that it could find if it was looking at the whole file.
If the segment breaks happen to fall during complex schenes, you will not get as good of an encode as you would in an unsegmented job.
That said, you can un-check 'allow job segmenting' in the compressor setting, and that eliminates this issue -
SP Online Auth Error: Direct login to WLID is not allowed for this federated namespace
I receive the error "Direct login to WLID is not allowed for this federated namespace" when authenticating for Sharepoint online over https using code from: code.msdn.microsoft.com/windowsapps/Office-365-Create-Windows-5a88ccfc/view/SourceCode#content
Is there any setting on Sharepoint Online that is preventing successful authentication. The credentials passed are valid.
Thanks.No. SharePoint uses claims authentication for login by default. Since SharePoint doesn't recognize the source of connection you are trying to connect. Try using secure store from SharePoint online to add credentials of your windows app and then try
working it. Even if that doesn't work then try modifying the C sharp connection to SharePoint code.
If you find this information useful then please propose this as answer and vote.
Thanks.
Ujjwal Patel
|
SharePoint Online Support Engineer, MCPD, MCTS, MCAD. -
Vendor Creation ,Partner role OA not allowed for Vendor of a/c group ZLOV
Dear Freinds,
I am facing problem of Vendor creation , i am getting message PARTNER ROLE OA NOT ALLOWED FOR VENDOR OF ACCOUNT GROUP ZLOV.
While creation of Vendor in Partner function i could not enter partner number, system is not accepting any data, message is getting as above.due to which i could not create any vendor.
Presently I am in process/ setting of ERS functionality in MM,
now all my Vendor creation is stuck up ,
please help me how to solve the problem
Regards
DilipHi Dilip,
Check first have you Define Permissible Partner Roles per Account Group..
Check the path:
SPRO-Materials Management-Purchasing-Partner Determination-Define Permissible Partner Roles per Account Group
Here check whether OA is assigned with ZLOV or not...If no then click on new entries and enter partner function as OA and Vendor account group ZLOV...Save nd come out...
Now proceed...Hope it helps..
Utsav -
Reg msg "Payment method(s) are not allowed for this program".
Hi...
I am copying a standard program RFFOES_T (Print program for bank transfer) into a custom program. When i try to execute the custom program it gives me a msg saying
"Payment method(s) are not allowed for this program".
Can you please Provide a solution for this problem.
Regards,
Indira.Indira,
1.RFFOES_T is using Logical database PYF.Seems you have copied it as it is without changing the attributes of the program.
2.As it is using logical database PYF it needs to be tagged to the respective payment methods in FBZP settings as below
FBZP
>>Payment methods in Country
>> in the next screen click on position and give the company code and payment method
>> in the next screen select the corresponding payment method and click on the details(ctrlshiftf2) ie magnifying glass icon
>>in the next screen within Payment Medium you will get to see two radio buttons as Payment medium workbench(uses DMEE tree structure) and payment medium programs (uses the standard prog).Here in Payment medium Program either the standard prog or your zprogram should be tagged otherwise you will get the error message as you mentioned.
3.Once you tag the program in the FBZP setting to the respective payment methods,after the payment run you will be able to run the program.
4.If you don't want the program to be linked to FBZP settings then as far as my knowledge is concerned you need to avoid using logical database PYF and change the entire code using the regular database tables like reguh,regup,bkpf,bseg etc.(I think this should be the best approach)
Thanks,
K.Kiran. -
BAPI CASESERVICE CREATEMULT - Alternative price not allowed for the service
Hi,
I am using .Net Connector to connect to BAPI. I am developing a .Net order processing application and intend to send the order information to SAP using BAPI_CASESERVICE_CREATEMULT.
However, I keep getting the error message "An alternative price is not allowed for the service..". The service id is already setup at SAP and I am not sending any price information. I am only sending quantity. The DIFF_PRICE is set to 0.
Any advice? I appreciate your help.Hi,
I am using .Net Connector to connect to BAPI. I am developing a .Net order processing application and intend to send the order information to SAP using BAPI_CASESERVICE_CREATEMULT.
However, I keep getting the error message "An alternative price is not allowed for the service..". The service id is already setup at SAP and I am not sending any price information. I am only sending quantity. The DIFF_PRICE is set to 0.
Any advice? I appreciate your help. -
Hello,
Did anyone ever have the same error message 'Payments are not allowed for business unit (6000,568)' so that he can tell me what I did wrong?
I get this message when I click on 'add' on the regular or epress deposit pages
I have set up the payment options at BU Level so I have no idea what to do know.
Regards,
StijnI forgot to creae the group type P ....
-
FI posting not allowed for WBS Element
Hi All,
While doing down payment billing I'm getting error that FI posting is not allowed for WBS element. But FI periods are open for all months in 2008.
Please suggest how to resolve this issue.
Regards,
HarishHello
Account assignment
If you want to post actual costs and commitments to a WBS element, you have to indicate that the WBS element is an account assignment element in the WBS. All objects that can be assigned costs and commitments within a project (for example, orders, networks, or purchase orders) can only be assigned to a WBS element if you have set the account assignment indicator for the element.
In Customizing for the Project System, you can set an indicator to specify that costs are planned for all WBS elements or only for specific WBS elements.
Billing
If you want to post revenues to a WBS element, you have to indicate that the WBS element is a billing element in the WBS.
Reg
assign points if useful
Maybe you are looking for
-
I'm using Premier elements 12. When I open a VOB file, the audio and video are not in sync. I can open that same file with windows media player and all is well. What do I need to do with respect to editing a file like this? The information about t
-
My firefox will not load, ive tried clicking the task bar icon and the icon in program files x86 but it will not load. When I tried to uninstalland reinstall it told me that I had to close firefox first so apparently it is running. In proccesses ther
-
We are having difficulty finding answers on how to control code management and promotion for our Interactive Forms by Adobe projects. We have tried to load our projects into the DTR and are having some issues, but we haven't even found anything that
-
Oracle error: java.sql.sqlrecoverableException: Closed Connection
need help on this closed connection getting oracle error: java.sql.sqlrecoverableException: Closed Connection when running a java application using tomcat api to oracle 11g database EE 11.2.0.3.0 on windows 2008 R2 The process is reading data from an
-
Run time configuration in jbuilder.
I have a program which will need to set some system parameters when executing it. java -D {setparameter} -D {set some other parameter } -jar program.jar. I want to know where can i enter this information in the JBuilder as as to use it for executing