Apple TV slow streaming

Streaming from iTunes on my Apple TV 3 is painfully slow, despite restoring resetting and updating it and my modem several times. It was much faster a few months ago. Streaming from my MacBook is ok
I have a 8Mps Internet connection
Any clues?

You are not alone. I believe there is somehting fundamentaly wrong with atv. I had these issues startiing in September 2012 and still not resolved. I tried everyting, changing DNS servers and settings, changing to a different ISP, selling my atv2 and upgrading to atv3. moving away from wifi to an ethernet connection. Nothing seems to fix this.
It is sooo frustrating. one day it is fine and the next it takes 7 hours to download a SD movie.
My internet speed is in excess of 100mb/s, when I connect to the itunes store on my macbook and rent a movie it downloads almost instantaneously. I can start watching straight away. But no such luck on atv.
Funny that it seems to be a raondom thing. My mates with atv do not expereince this issue. But having changed all the variables I have to conclude that it is an issue with apple's servers and how they provide content to atv.
Off to the store now to replace the atv (will be the 3rd device). If this does not work I'm moving over to Amazon Instant Video!

Similar Messages

  • Slow streaming from iCloud to apple tv, slow streaming from iCloud to apple tv

    The time it takes to stream tv or movie from icloud to apple tv 2 can run as long as 2 to 3 hours. I cannot find any settings that will improve the perfotmance. What can I do?

    When it is going to sleep, it stops outward communications. Wireless connections can be frequently disconnected as well. If you want it to stay awake while streaming, go to the settings application and tap general, find the sleep settings and set to "Never". This will also keep your iPad from sleeping at all though, so make sure you lock it or close your Smart Cover ("Sleep/Wake with Smart Cover" must be enabled for the cover to put it to sleep, but it is enabled by default) or else the screen will stay on until the battery dies.
    I prefer using either the dock connector to VGA adapter or the dock connector to HDMI to connect to the TV, that way it doesn't take up your Wireless Network's bandwidth, and you don't need to use the Apple TV either. The sleep problem will still exist, however, unless you change the sleep time like I mentioned above.

  • Incredibly slow streaming of video from macbook pro to apple tv

    Hi.  We purchased an apple tv 3rd generation connected to wifi.  our internet runs about 7mb/sec.  no problem streaming movies purchased on itunes through apple tv but ridiculously slow streaming mp4 through itunes to apple tv over macbook.  when i say ridiculously, not even sure if it works... just seems to think about it.   home sharing is enabled on both devices.  i know they are communicating because i can play my music library on the tv (which is also pretty slow).  am i missing something? 

    Home sharing is done over the local network so internet speed wouldn't play a factor. I would be inclined to think it is specific to the videos you are trying to share.
    Have you made sure they are compatible with the Apple TV?
    H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4 and .mov file formats
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4 and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • TS2972 Music played through Apple TV the streaming is really slow & jumpy

    I have just installed a new Apple TV & have my music library loaded in iTunes library on a new MacBook Pro. However, when I try to play music track through Apple TV the streaming is frustratingly slow and track often jams after a few seconds and/or become really jumpy etc. The wireless connection appears to be strong enough - showing full bars in the wireless icon on laptop. But the apple TV signal only shows 2/3 bars out of 5.
    Does anyone have any ideas on how to fix? Do I need to compress the music files (from downloaded CD's) into a smaller file size or different format? I notice that music that I've downloaded from iTunes store seem to stream & play without any problem.
    Meanwhile the photo library loading is also painfully slow through Apple TV - assume this is due the same problem?

    Welcome to the Apple community.
    You need to get your network working better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • HT4352 slow streaming from itunes to apple tv 3

    I am experiencing slow streaming from itunes to apple tv (latest gen). My itunes library is found but when the music begins it stops after 2 seconds then restarts etc etc. It seems like it is streaming slowly from itunes. At first it appeared the firewall was the problem but this has been eliminated. Any one have the same problems or know of a solution?

    Hi,
    I had this problem both between Mac itunes library and Apple TV and Windows 7 Itunes Library to Apple TV, I disabled IPv6 on both my mac and windows machine, fixed the ip on all my devices. I also disabled windows firewall on my windows machine (I have an external firewall so not needed) you may not want to do this. From my windows machine it would play a few songs, then start one at 7 seconds and not play audio. From my mac it would say connecting to itunes library with the wheel.
    These are the things I believe to resolve the issue, I also disabled a tonne of windows services (iphelper, Windows media streaming)

  • Slow Streaming - Local Files (Video ) only

    I'm trying to pin down this slow streaming and excessive buffering problem:
    Apple TV 2nd gen - updated to latest software - operating wirelessly
    Fios Actiontec Router
    PC quadcore intel (fast)
    Everything else seems to be working fine, photos, internet streaming, etc. But when I try to stream local video files, it is extremely slow (if it starts at all)
    I have just run a test and Netflix and Youtube are blazing fast to load and then play long videos.
    I have just tested it with 2 new videos in my Itunes Home Video folder:
    The orginal is an mp4- 258 MB with a 5.75 bitrate
    I actually also converted this via itunes to a m4v file for testing purposes
    Both files are extremely slow if they load at all.Virtually unwatchable.
    The same file (mp4) uploaded to youtube and played through the YouTube app plays almost instantaneously.
    Could this be some router setting? Or is this all I can expect to get,
    Is there some other fix?
    Thanks

    It likely has to do with the encoding. Local streaming is done over the local network. Try converting with handbrake.
    Here are the supported specs for ATV
    H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Slow streaming on ATV2

    Is anyone else experiencing slow streaming from the iTunes store via the ATV2?

    JimLosAltos wrote:
    FYI -- Some pointers of potential use:
    1) Found WiFi was 8 MBsec in this room so reconfigured router and get 21 Mbsec, helps on streaming
    Supposedly altering Multicast rate can sometimes help too.
    2) ATV2 software updates turn OFF Home sharing each time.
    Not seen this but Home Sharing seems more flaky than the older 'pairing' with iTunes.
    3) Use of cordless landline phone knocks out ATV2 streaming every time.
    You've clearly identified a local source of RF interference - my microwave used to do this until I moved it.
    4) Occasional break up in music stream over WiFi.
    Your wi-fi sounds as though it's flaky affected by interference - it could be a faulty AppleTV 2 wi-fi card - have you asked Apple to replace if the older one worked fine?
    Anecdotally my ATV2 has lower signal strength on wi-fi compared to an AppleTV 1 in the same location.
    AC

  • Multiple (but separate) domain problem & Apple's slow and useless response

    I am having problem with multiple (but separate) domain. I opened a ticket.
    Here is Apple's slow and useless response and my follow up.
    This follow up is not going to resolve the issues I am having. The sites are not in one domain file. I have split them into separate domains. I found that the simplest change to any page made the publishing process extremely and reasonably slow. If I updated a single site, iWeb republishes the whole conglomeration; hardly the most efficient way.
    I have several directories under the ~/Library/Application Support/iWeb/ directory with separate Domain.sites2 files for each site:
    consultingAM.com
    DarkAssassinMovie.com
    Fuzzy Llama Junior Optimist Club
    GulfportOptimist.com
    OptimistView
    pAwesomeProductions.com
    www.nfdoi.com
    With the previous version of iWeb, I navigated to a specific ~/Library/Application Support/iWeb/ directory, selected the Domain.site file, and opened it. This would open iWeb with the selected domain. Several of the sites have their blog page with the RSS subscribe option.
    Once I made the update, all I usually had to do was publish site and all was well. Occasionally, I would have to do a publish all if I changed domains. All in all, I had no problems with publishing once I found the right steps to be able to maintain multiple domains.
    Now, using the default publish or publish all process, all I get is the last site I published. In order to get things semi-functional, I published a site, then I would go to iDisk/Web/Sites/ directory, select the folder name for the site I had just published, then copy it or move it to iDisk/Web/Sites/iWeb directory. This was rather slow and I suspect it is not an approved solution, but it semi-worked. My sites are back up, but they are not fully functional.
    Is there anyway to get back to using the ~/Library/Application Support/iWeb/ directory (separate Domain.sites file for each site) process to publish multiple sites? If not, is there any way to suck in the various domains back into one? If that is possible, will it take hours to publish the combined 2-3GB like it did with the previous version?
    How do I reverse the 'personal domain' process? I do not want to do this at this time. I just wanted to see what the steps were. I have done the first step, but not the second.
    I was glad to see some of the changes made in the upgrade (web widgets, maps, html snippets, theme switching), but I am too happy about the changes made by the upgrade process. In the past, I upgraded my Apple related stuff as soon as it came out. Based on this upgrade, that won't happen again.
    It took you guys 5 days to get back to me (during which time several of my sites were down) and I do not believe the information you provided is going to solve my specific problems. I am very disappointed with the results of this upgrade. Clearly there was inadequate testing of this product before it was released. I cannot recall seeing the Apple discussion forums with hundreds of topics and thousands of posts within a week or two of a new release. Apple had to upgrade iWeb in the first week, another poor sign.
    Apple is beginning to slip back to the pack; all vendors all below average. Apple is getting more like Microsoft everyday. First Apple delays the release of an OS upgrade so they can concentrate on a freaking phone, now you release software that is so buggy it should be classified as beta at best.
    Some of the changes/problem I am seeing since the upgrade (in addition to the problems mentioned previously) are:
    layout changes; some of my pages no longer look the same; same of the changes are so bad the pages are unreadable
    broken photo pages; some of my photo pages no longer work; some of them have no text or pictures
    file/page name changes; why would Apple change the location of the files; now my domains are not pointing right location; special characters (like spaces, ampersands, etc.) are handled differently in this version; specifically, I see that spaces are changed to underscores (_); iWeb used to use '%20' for spaces; what was Apple thinking?
    broken 3rd party themes; I know Apple is not responsible for 3rd party themes, but you should certainly be aware that they exist
    Based on what I am seeing online, most of the people who are complaining about major iWeb issues are not newbies; based on the technical details in the threads, there are clearly some experienced people who are trying to figure things outw. I have lost many hours trying to figure this mess out. I now have to review hundreds of pages to try get things to look and work the way they did before the upgrade. I have had to handle dozens of phone calls and emails from my viewers and subscribers trying to explain the situation.
    I googled 'iweb 08 *****' and got nearly 50,000 hits! I think Apple better get in front of this train before it gets run over.
    On Aug 19, 2007, at 11:09 AM, .Mac Support wrote:
    Dear David,
    I understand that you are experiencing an issue viewing some of your websites published in iWeb:
    I have examined all of the published pages and they appear to load and function as expected. If you published your website to .Mac, you can visit it either of these ways:
    - In iWeb, click the Visit button in the lower-left corner.
    - Enter the following URL into a web browser:
    http://web.mac.com/daviddawley/
    If you have published more than one website, the URL above will take you to the default website, which is the first website listed in iWeb. To visit another website you have created in iWeb, use the following URL format:
    http://web.mac.com/daviddawley/iWeb/YourSiteName
    Using this form, the web addresses for the two sites you mentioned would be:
    http://web.mac.com/daviddawley/iWeb/FuzzyLlamaJuniorOptimist.com
    http://web.mac.com/daviddawley/iWeb/pAwesomeProductions.com
    To change the default website, simply open iWeb, and in the Site Organizer, drag the desired default website to the top and republish to .Mac.
    NOTE: Be sure to give each website a unique name. This will help prevent one website from overwriting another. For further information, refer to the following article:
    iWeb: Do not use similar names for your sites
    http://www.info.apple.com/kbnum/n303042
    If you still experience issues with the website, try the following troubleshooting steps:
    WAIT SEVERAL MINUTES
    If your website has movies, you may need to wait several minutes after going to the website before the movies are ready to play. The QuickTime Player icon indicates that a movie is still loading.
    CLEAR YOUR BROWSER CACHE
    If you use Safari, you can clear your browser cache by choosing Empty Cache from the Safari menu. If you use another browser, consult that browser’s documentation if you need assistance in clearing your browser cache.
    UPDATE YOUR BROWSER
    Make sure you are using the latest available version of your web browser when viewing pages published in iWeb. If you use Safari, you can check for updates by choosing Software Update from the Apple menu. If there are any available Safari, Security, or Mac OS X updates, install those updates and try looking at your website again.
    If you use another browser, consult that browser’s documentation if you need assistance in updating the browser.
    TRY ANOTHER BROWSER
    If you use a Mac, try viewing your website with Safari or Firefox. If you use Windows, try Internet Explorer 6 or Firefox. Firefox is a free download available here: http://getfirefox.com
    TRY ANOTHER NETWORK
    If possible, try viewing your website from another network or Internet connection. If you can successfully view the website from another network, please consult your network administrator or Internet service provider (ISP) to resolve this issue.
    Important: Mention of third-party websites and products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the selection, performance, or use of information or products found at third-party websites. Apple provides this only as a convenience to our users. Apple has not tested the information found on these sites and makes no representations regarding its accuracy or reliability. There are risks inherent in the use of any information or products found on the Internet, and Apple assumes no responsibility in this regard. Please understand that a third-party site is independent from Apple and that Apple has no control over the content on that website.
    Sincerely,
    Mel
    .Mac Support
    http://www.apple.com/support/dotmac
    http://www.mac.com/learningcenter
    Support Subject : iWeb
    Sub Issue : I can't publish to .Mac from iWeb
    Comments : I was interested in forwarding one of several iWeb based sites to one of my domains. I wanted to see what the steps were. I believe I inadvertently started the process for moving the site to www.nfdoi.com site. I have several sub directories under the ~/Library/Application Support/iWeb directory with separate domain.sites files (now domain.sites2).
    I was going through all of my domain.sites files and opening them in iWeb08; then publishing them. Somewhere along the line everything blew up. Most of my iWeb sites no longer function, It appears that every other iweb site other www.nfdoi.com is down EXCEPT the last one I published. I have made a mess of things and would appreciate any help.
    Don't work:
    http://web.mac.com/daviddawley/FuzzyLlamaJuniorOptimist.com
    http://web.mac.com/daviddawley/pAwesomeProductions.com
    Works:
    http://web.mac.com/daviddawley/Optimist_View/OptimistView.com/OptimistView.com.h tml
    ========= PLEASE USE THE SPACE ABOVE TO DESCRIBE THE ISSUE BASED ON THE QUESTIONS BELOW =========
    1. What version of iWeb are you using to publish to .Mac? iLife 08
    2. When did you first notice this issue? After publishing a few sites.
    3. What happens, including any error messages, when you try to publish your site?
    --------------------- Additional Info -------------------------
    Alternate email address : [email protected]
    OS Version : Mac OS X 10.4.10
    Browser Type : Safari 2.x
    Category : I can't publish to .Mac from iWeb
    Connection Type :Other
    TrackID: 4154168

    Just got off the phone with Apple Support.  There procedure was the following:
    1.  Go to the Apple TV, select settings, general and scroll down to reset.
    2.  Select reset and then select reset all
    Apple TV will go through a restart after the reset and you will have to select your network then log in with your network or Airport Express password.  You will then have to turn on home sharing and It will then ask you for your Apple ID for the iTunes store and then the password.  At this point you may not see your library, because the Apple TV wants you to turn on home sharing on your home computer that is hosting the movie library.  Turn off home sharing on that computer, restart iTunes and turn on home sharing again.  After this is done you should be able to see you library listed under the computer.
    After going through these steps, when I select an HD movie from my iTunes library the movie comes up after about a 5 second delay.
    Hope this helps!  I am back up for business.

  • Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it

    Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it is frozen.  I have tried rebooting the computer and it works for a few minutes then gets stuck.

    Which model iMac do you have?
    How large is your HD and how much space do you have left?
    Check out the following & do the necessary: 
    User Tip:  Why is my computer slow?
    What to do when your computer is too slow
    Speeding up your Mac
    OS X (10.6.6)
    Use Software Update or the OS 10.6.8 combo update to update your OS.  Also, update everything SU has to offer for your computer.  When done, repair permissions and restart your computer.

  • Can you use 2 apple tvs on the same network with different apple ids and how would your devices know which apple tv to stream to?

    Hi,
    I was looking into purchasing 2 apple tvs and was wondering if they can be setup with different apple ids. I need to have mine setup with my id and be able to hook my devices to it , but have the one in a bedroom hooked to a different apple id and have my friend's devices stream to that one and not mine.  Is this possible?

    Welcome to the Apple Community.
    In order that your Apple TV only streamed from your iTunes Library and your friends to your friends, you would both have to have different homesharing ID's.
    So far as devices go, any device on a network can stream over AirPlay to an Apple TV, to ensure each of you couldn't stream to the others device you can enable a password via the Apple TV which would then need entering when you used a device for AirPlay.
    Shouldn't be a problem to do what you want to do.

  • How can I get my apple tv to stream my music from iTunes Match

    How can I get my apple tv to stream my music from iTunes Match

    am already a subscriber of ITunes Match and all my collection has been matched but it will not stream to AppleTV  how can I correct this error all I am getting is the whirling wheel

  • Using Multiple Apple TVs to stream iTunes Music

    Hey there All,
    I'm considering using multiple(at least 2) Apple TVs to stream iTunes content around my home. The layout is ranch style and I'd like to put 1 in my Media room where I have my main HT set-up and another in the dining area. Will I be able to have these act like Airport Express units and have same music playing on both, if both are on? I'm considering this as I often entertain and am looking for an inexpensive solution to a Crestron or Sonos system and I'd also like to be able to move 1 Apple TV unit to a different location like the Deck in the Summer & just connect my old boombox with RCA inputs.
    TIA for any assistance or suggestions.

    Hey there BCFind,
    Thanks for your response and good wishes. I've tried a couple of AE stations with limited success(dropping connection--still have them, any thoughts there? I'd appreciate them) and I would like to have the video option, have over 100 DVD rips stored on my iMac CD's external drive that play through iTunes(converted to H.264), a Netflix sub and we love the Jazz stations on iTunes radio. I use my 1st gen iPod Touch and Apple's Remote app with my iMac for music in my bedroom/office but, we'd like to occasionally also eat & watch a movie together as well have the music, get a 2 for 1-- music for entertaining and movies for the family. So, the original question... you're saying 2 ATVs will play the same music if both are on, in the same way that the Airport Express does?
    Your set-up seems sweet. Thanks again.

  • AppleTV: How can I see what song is playing if I am viewing my photos in slide show mode on Apple TV and streaming from my iTunes?

    How can I see what song is playing if I am viewing my photos in slide show mode on Apple TV and streaming music from my iTunes?
    Thanks.

    Thank you Winston. I guess we need to ask that this feature gets added at least as an option in an upcoming release. When someone is using shuffle, it helps to know what is playing while viewing pictures.
    Where is my Apple request button when one needs it ? :-) Cheers, C

  • Can I connect my Lacie Space II - 2 Tb to an Apple TV and stream my movies in the LaCie to my TV through the Apple TV?

    Can I connect my Lacie Space II - 2 Tb to an Apple TV and stream my movies in the LaCie to my TV through the Apple TV?
    I would really like to have an apple TV to stream from and use also as media player in replacement of mt PC. Is this possible?
    Thanks

    Only if the content on the drive is part of your iTunes library and iTunes is running to manage the content for the Apple TV. You can't replace your PC with the drive for use with Apple TV.

  • HT200197 NO audio using Apple TV for streaming materials, and YES audio for Mac stored ones; what gives?

    NO audio using Apple TV for streaming materials, and YES audio for Mac stored ones; what gives?

    Hello Cravate,
    The following article provdies some useful troubleshooting that can help resolve audio issues with your Apple TV.
    Apple TV (2nd and 3rd generation): Troubleshooting audio issues
    http://support.apple.com/kb/TS5150
    Cheers,
    Allen

Maybe you are looking for

  • Question on internal table logic..

    Gurus, I have a internal table as follows: it_tab: ID---ACTION---CHANGE A1-----X-- B2---- U C1-----X-- U C2-----X-- Without looping at the table, how can I find get the result that the internal table has 3 ids with ACTION ='X' and 1 ID with ACTION  =

  • Automatic reset

    My ipod nano is almost exactly 1 year old and I need help quick! From the main menu, whenever I click the center button, it resets the ipod. However, it only does it when I try to click on "Music". If I use the center button to select "Photos" or "Se

  • How can I build an animated drag and drop multimeter lead using Flash?

    I am building a virtual multimeter for testing simulated circuits. I would like to be able to drag an animated multimeter test lead to a point in the circuit and drop it on a target. The static drag and drop is not my issue. I would like some suggest

  • Widget will not download

    Downloaded a widget from the AppStore.  Widget would not open for download. ( Yes I have the preferences set for it to open)  Got this Error message:cannot be opened because it is from an unidentified developer Don't understand how something that is

  • Lost everything on safari, address bar, back, forward,. refresh tabs also

    like the title says i have lost it all, i had view tab etc showing so i tried to get rid of it but got rid of everything and now i cant get it back, i cant click view because its not there, i uninstalled and reinstalled but no luck