Apple TV sound quit working...sometimes

I have had great success over the last few months with my Apple TV.  All of a sudden it now will play the sound intermittently when streaming videos from itunes.  after i have the problem with a movie no sound is available until I put it into sleep mode.  Help!

well....that didn't work.  in fact to add insult to injury, the menu clicks did not work again at start up, but half way through scrolling for movies they started.  When I selected a movie they stop again - along with any other sound
This blows!!!!

Similar Messages

  • I have an iPhone 4S, and just now the sound quit working. It works with the headset and if I put it on speaker, but not anyway else. The music won't send sound out, the purine calls do the same. I reset to the original settings, nothing works.

    I have an iPhone 4S, the sound quit working. I have sound in the headset and if I put the phone on speaker, I've reset to original settings, tried several options. Nothing works to resolve the options. Please help.

    Hi there Wacjude,
    I would recommend taking a look at the article below for some speaker and receiver troubleshooting steps.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Hope that helps.
    Griff W.

  • Sound quit working with game apps?

    Sound quit working with my game apps and email.
    Radio, facetime & music work fine.
    Has anyone had this issue?
    I did not change any settings.
    It worked fine yesterday and today no sound.

    If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Sound quit working on MacBook Pro

    sound quit working on macBook. have tried all PRAM/SMC resetting ideas. it seems that in SysPrefs/Sound/Output........"internal speakers" is no longer listed, and mute is checked. how can i re-add "internal speakers" as an output option?

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
    7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/Audio
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    14. Reinstall OS X after backing up all data.
    15. Make a "Genius" appointment at an Apple Store.

  • TS2090 my apple tv sound dosnt work ive tried almost every thing swich it off restart update unplug it changing my tv to other mode im fed up

    My apple tv sound dosent work
    I`v tried almost evey thing
    1. update
    2. restart
    3. unpluge aptv and HDMI
    4.restor
    est
    Im fed up please any advice

    i have this same issue. The sound was working fine. I have to pause the streaming, and then when I hit play again, no sound. I have also tried, unplugging, for 30 minutes (everything: sound cable, HDMI, power, and network) then restarting. I tried switching the HDMI source. The sound works fine on the tv without the apple tv or with the dvd. Just not with the apple tv. I have updated the software. The sound doesn't work for streaming via airplay, playing anything off itunes, it doens't even have sound for the sound effects when you navigate on the home screen. I too am extremely frustrated. Google TV here we come.

  • TS3274 The sound on my ipad 2 is not working.  I have a Logitech Keyboard case that I use with my ipad 2.  Last night, the sound quit working.  I've tried everything to get the sound back - still no sound.  HELP!! Please?

    Trying to get the sound working again on my ipad 2.  I have a Logitech keyboard case I use with my ipad 2.  Last night the sound quit but I don't know why.  I've tried everything and can't get the sound back again.  Help!

    HI there,
    There are a couple things you can try. The first thing I would recommend is resetting all settings by going to Settings > General > Reset > Reset All Settings. If that doesn't work, take a look at the article below for additional troubleshooting steps.
    Note: The article title impies that it is for iPhones, but the troubleshooting steps are still aplicable to iPads.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Hope that helps,
    Griff W.

  • Sound quit working

    The sound has been inconsistant for the last day or so and now it completely stopped. The message in System Preferences>Sound is: "The selected device has no output contros".  I'm at a loss as to what happened, why the sound suddenly quit working. Any suggestions or thoughts on how to fix this will be appreciated.

    Plug the headphone into and out of the socket few times, to turn off the digital sound swich.
    Reset PRAM.
    http://support.apple.com/kb/PH4405
    Reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for:
    Resetting SMC on portables with a battery you should not remove on your own.
    Best.

  • Sound quit working but this solves the problem

     Good news.......It seems that a lot of people are having the same problem with sound suddenly not working, even though all diagnostic test indicate that it is on.  I unplugged the power and took out the battery for about 5 minutes. When I powered back up ......... the sound was working just fine. Give it a try.  Toshiba does need to address this issue.  I'm going to send in a complaint and suggest that others do the same.

    Hi there Wacjude,
    I would recommend taking a look at the article below for some speaker and receiver troubleshooting steps.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Hope that helps.
    Griff W.

  • My message sounds quit working

    My message sounds stopped working, any suggestion?

    Hi FMBERARDI,
    Thanks for visiting Apple Support Communities.
    Start with these steps if you do not hear sound from your iPhone when using Messages:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the articles with these steps here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Best,
    Jeremy

  • HP Pavilion dv7-1245dx upgraded from Vista to windows 7 sound quit working

    Sound just quit working - red mute light won't change - at first sound just didn't work - after hours of trying everything now it says no speakers are plugged in - I've probably made it worse with all my efforts

    Hi:
    See if the Windows Vista driver will work.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-68687-1&cc=us&dlc=en&lc=en&​...=
    Paul

  • Game lockscreen keyboard sounds quit working

    Just posted about my lockscreen and keyboard sounds suddenly stop working and now I have lost all game sounds.  The game sounds were working only a couple of hours ago and now nothing!  What do I do now?!

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • I have itunes 11.1 and just recently the sound quit working when i try to play a song Itunes. What is going on with it?

    the sound on itunes has quit working but when i go to the internet and paly a song on say youtube there's sound.

    Since iTunes 11.1 is computer based, you're saying this issue is on your Mac?

  • Sound quit working suddenly product number an831ua#aba

    I have a hp pavilion dv6815nr serial number:cnf815imhv, p/n; an831ua#aba. I just noticed a few weeks ago that my sound on my laptop quit working. I've disabled and enabled the drivers again, windows media player doesn't even work and I can't hear youtube videos or any media  for that matter. I've checked the device manager and there isn't a yellow exclamation point by the drivers. there are exclamation icons by the Ricoh memory stick controller though. The drivers names are LitexMedia Virtual Audio cable and when I click on the properties it says that the device is performing normally. I'm lost. Please help.

    PrintPlaying Audio Publisher details
    Issues found
    IDT High Definition Audio CODEC has a driver problemIDT High Definition Audio CODEC has a driver problem
    There is a problem with the driver for IDT High Definition Audio CODEC. The driver needs to be reinstalled. Not fixed Not Fixed
    Reinstall device driver Completed
    Check audio deviceCheck audio device
    There might be a problem with your audio device. Detected Detected
    Potential issues that were checked
    Windows Update configured to never install driversWindows Update configured to never install drivers
    Driver updates aren't automatically installed when detected by Windows Update. Issue not present
    Issues found Detection details
    5 IDT High Definition Audio CODEC has a driver problem Not fixed Not Fixed
    There is a problem with the driver for IDT High Definition Audio CODEC. The driver needs to be reinstalled.
    InformationalDevice information
    Name: IDT High Definition Audio CODEC
    ID: HDAUDIO\FUNC_01&VEN_111D&DEV_76E0&SUBSYS_103C198B&REV_1003\4&9F7D0F6&0&0001
    Error code: 39

  • The sound quit working on my iPhone 4s.... any suggestions? I can't play music, my alarm doesn't work, no sounds work!!!!!! Ugh it is less than 2 months old!!!

    Does anyone have any suggestions about this problem? I can't believe that my phone is less than 2 months old and it already quit working.... I do not have it on mute, I tried plugging the ear jacks in and out. I have not dropped it, no moisture, and etc

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    If you've been through ALL of these steps and you still have problems, then you'll need to bring your phone into Apple for evaluation.

  • Sounds not working sometimes iphone 5s since last update

    since the last update the sounds in my iPhone 5s sometimes don't work.  Especially mystery tone. It is a standard sound from the list in the phone. Mid I turn the phone off and turn itnon again and reset the sound it will work again... For a while...
    thank you
    KIwi

    Hi Kiwi518,
    You can back up yur iPhone using iTunes on your computer, or if you have an iCloud account you can use it. See this article for how to choose -
    Should I use iTunes or iCloud to back up my iPhone, iPad, or iPod touch? - Apple Support
    This article explains how to do either type of backup -
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for

  • Recovery Problem - Blue Screen error (STOP: 0x00008086)

    I am working on a Toshiba Satellite laptop and need to recover back to original state. I do not have Recovery Disks, however, I have followed the Toshiba 'How to' instructions (F8 then select Repair your Computer) it show the Windows progress bar the

  • Query on RMAN Retention Policy

    Hi, I have my Retention policy set to Redundancy 2 I have taken 3 backups so far ( 2 Backup Sets, 1 Image Copy ) When I check report obsolete I get the following RMAN retention policy will be applied to the command RMAN retention policy is set to red

  • CS4 32-bit fails to startup (64-bit fine)

    Using Vista 64-bit, installed PS CS4 the other day. I have been using the 64 bit version fine with no problems. However, I downloaded a plugin that only works in the 32-bit version, so I tried to launch the 32-bit version from the start menu, and the

  • 16-bit color depth SVG output?

    Bon día to you all, I have a very dumb question... How do I output 16-bit SVG files from Illustrator? I've been working with Illustrator for what has seemed an eternity but have never ventured into the realm of SVG. Now I have found myself with the n

  • Question- software upgrade to allow elements 4 to read EOS500D raw files

    What upgrade is needed to get elements 4 to read raw files from CanonEOS500D?