Apple TV stops playing iMatch music after several minutes

Model: MD199NF/A
Software: 5.1 (5201)
After updating to software version 5.1, I'm experiencing trouble with my Apple TV and my iMatch music.
After starting the music using iMatch it starts normal and nothing is wrong, but sometimes it stops after a few minutes (5-30 min).
The only thing to get it started again is to restart my Apple TV or else it wil keep trying to load my (iMatch) music and nothing happens at all.
Are there more users having this problem? What is the possible solution to this problem?
Thanks in advance

I have the same problem and haven't found an answer or seen one. I don't have any problems downloading/streaming off the net but the iTunes timeout is driving me crazy. Did you ever find the problem?

Similar Messages

  • Apple Tv stops playing my music(iCloud) and Music direct from my computer after 4-5 minutes regardless of a wireless or ethernet connection--Imac is 3 months old--Apple TV 1 year old?

    Tried reesetting  Airport extreme and Apple TV--no luck?

    OK, no answers!
    I've played music via the ATV3 for several hours without dropping the signal, so obviously the 5.2 update cannot handle the bandwidth to play movies.
    I see other people here and elsewhere in the forums have the same problem. Bad Apple for not thoroughly testing.
    Next question is, can I revert back to 5.1?
    Regards
    Santa

  • My nano is fully charged and when I use the earphones it comes with, the nano stops playing my music after a few seconds and turns off.  But when I use another earphone, it's okay and stays on. How do I keep the nano from turning off after a few seconds?

    Why does my nano keep turning off after a few seconds while I'm listening to my music?  It's fully charged and brand new.

    I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
    My computer meets the requirements.
    All software (Windows, iTunes and QuickTime) are up to date.
    As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
    My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
    As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
    As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
    'Readyboost' was already set at 'Do not use'.
    No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
    The problem still exists. Please help.

  • Non-Apple content stops playing at 1-minute, 23-seconds on iPod(s)

    For some reason my iPod(s) only seamlessly play through my imported music or Apple purchased files. For example, I use cd Baby, Amazon, and eMusic, as well as iTunes for downloading music and everything is played through my default player (iTunes); however, when I try to listen to my iPod via headphones or wirelessly, any non-Apple content stops playing at 1:23--everytime.  So, if I were in the shower and listening to my iPod via one of my wireless bluetooth speakers and I forget the source of where it came from (Apple vs. non-Apple) then I could be without music.  I cannot figure out why my iPod (I have several iPods and one is brand new) always wants to stop at 1-minute, 23-seconds for any content not purchased from Apple. 
    As you can imagine, this becomes quite a mess when listening to a playlist.  As a result, I find myself having to skip to the next song quite a bit now. Anyone else have this issue or have a suggestion?
    Wasn't an issue until iTunes 10 and later.
    Thanks.

    Sounds to me like it needs to go back to Apple again. Frustrating I know.
    I suppose you could try a format of the iPod in Windows. A full format does a check and remap of bad sectors on the iPod hard drive, and you would need to restore the iPod as normal (using the iPod updater) afterward.
    First, put the iPod into forced disk mode.
    See: How to put the iPod into disk mode.
    On your PC, go "my computer" and right click on the iPod, then choose "format". Ensure the settings are at "default" and that "quick format" is not checked. Now select "format". It will take a while, but when that's finished, restore the iPod using the updater.
    To exit forced disk mode, reset the iPod.

  • Non-Apple content stops playing at 1-minute, 23-seconds!!!!

    For some reason my iPod(s) only seamlessly play through my imported music or Apple purchased files.
    For example, I use cd Baby, Amazon, and eMusic, as well as iTunes for downloading music and everything is played through my default player (iTunes); however, when I try to listen to my iPod via headphones or wirelessly, any non-Apple content stops playing at 1:23--everytime. 
    So, if I were in the shower and listening to my iPod via one of my wireless bluetooth speakers and I forget the source of where it came from (Apple vs. non-Apple) then I could be without music.  I cannot figure out why my iPod (I have several iPods and one is brand new) always wants to stop at 1-minute, 23-seconds for any content not purchased from Apple.  As you can imagine, this becomes quite a mess when listening to a playlist.  As a result, I find myself having to skip to the next song quite a bit now.
    Anyone else have this issue or have a suggestion?
    Wasn't an issue until iTunes 10 and later.
    Thanks.

    I am having the sames issues.  I was on the phone with Apple over the weekend.  I was told they would report it to their engineers.  It would seem this problem occurred  first in May and June and was resolved from what I have read this morning in past discussions, yet seems to be reoccurring again as of this weekend.

  • Ipod shuffle stops playing the song after a few seconds

    My Ipod shuffle stops playing the song after a few seconds, i can skip to the next song but it happens again for every song..
    the thing is its random, sometimes 5secs or 10 secs or at the most a whole minute
    i have updated, restored, reinstalled an all that but i really dont want to send it back as im in afghanistan and would be weeks before i see it again an i use eveyday!! for running.. i thought maybe sweat had got inside it, its not the headphones i have already tried swapping them.
    please help out a soldier in need?

    mine is doing the same thing; I have updated it, and restored the factory settings, and it still isn't working. I use mine for running as well; I think it has something to do with the sweat. Hopefully someone posts with a fix.

  • Unable to play any music after updating FRONT ROW TO 1.2.2

    Please help, my Front Row refuse to play any music, after updating to 1.2.2 a day ago.
    it shows all the folders in the iTune and the playlists but none of the songs in the folder, you keep pressing play and pause button and it TAKE YOU TO A shufle and the n ext one massage says "A PROBLEM HAS OCCURED".
    It play the music videos and movies fron Front Row.
    Please anyone enlighten me with your wisdom.
    L. Namgyal
    iMac inTel   Mac OS X (10.4.7)  

    Hi
    I have the excact same problem, however the problem is in my case not the upgrade in Frontrow, as the trouble was present before aswell. Everything works fine for me ONCE, but if i return to my desktop after having activated frontrow, and then reactivate it, i get the same error as you. I can solve the problem by Quiting FR and then relaunching it again, but this is not acceptable.

  • When downloading movies, after several minutes an error message appears with "download error, tap to retry".  Continues to do this.  Any help?

    When downloading a movie on my IPad an error message occurs after recording for several minutes that says "Downloading error - please tap to retry".  The IPand also kicks out of Facebook after several minutes back to the screen meun.  Any advice on how to correct this?  Thank you.

    Hi MartinVernon,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • HT4623 After downloading 7.0.4 update it says preparing to install and after several minutes it says an error occured while downloading, plz anyone can help

    After downloading 7.0.4 update it says preparing to install and after several minutes it says an error occured while downloading, plz anyone can help

    Hello EvanClayton,
    Thank you for using the Apple Support Community. Due to the nature of your issue or question you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action.

  • I dropped my phone down the toilet and after drying it out for 3 days, it will turn on but turn itself off after several minutes

    i dropped my phone down the toilet and after drying it out for 3 days, it will turn on but turn itself off after several minutes, please help!

    so is there no saving my iphone 4? even if it works fine when its on, can text and phone, email etc. just turns off and then reloads the apple icon and asks for my passscode again. it almost seems as it wont charge.

  • Movie freezes while playing. Lasts for several minutes and continues to happen throughout movie.

    Movie freezes while playing on Apple TV. Will remain frozen for several minutes and happens repeatedly throughout movie.

    Could be related to interference. Check istumbler or netstumbler to verify. If on wifi try ethernet.

  • Wifi connection very slow and interrupted after several minutes

    My wifi connection is interrupted after several minutes. I can restart the connection with wifi assisted, diagnose tool. It indicates always ISP failure. When I go through the assistant, it sows that the network connection was changed, and the wifi connection is back. But only for some minutes, then I have to go the the assistant again, and again and again. Also the wifi protocoll tool did not help me.
    Meantime I don't have any problems with my IPad or Iphone.
    In the web I found plenty of other users with MacBook Pro (Retina) OS X Yosemite, Version 10.10.2 with similar problems. When will apple fix this bug?
    Do somebody has in idea how to fix it?
    Thanks for your support!
    Bird

    You posted in the support forum for the Apple routers......AirPort Express, Airport Extreme and Time Capsule.....the products pictured below:
    But, your post seems to describe a connection issue that you are experiencing with your MacBook Pro.  We are not sure how an Apple router might be involved here if your other devices are connecting well.
    You will likely receive a much faster and more informed response if you post your question in the support area for the MacBook Pro linked just below:
    MacBook Pro

  • I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002.  I don't know if related.  A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar b

    I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002.  I don't know if related.  A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?

    Hi Magsrobby,
    Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • My iPad does not automatically shut off after several minutes of non use. I can shut it off with the on/off switch. What can I do to get the auto sut off feature back?

    My IPad does not automatically shut off after several minutes of non use as it had been doing a few days ago  How can I restore this auto feature?

    Settings>General>Auto-Lock and select an Auto-Lock time (the "Never" setting will of course never auto-lock the device)

  • Overrun error (-10738072​52) occurs after several minutes

    Hello folks,
    I have a LV 7.0 program that terminates after several minutes of running with some VISA serial port communication with an error -1073807252, overrun error. I only get this error on Win98 and the latest version of LV (7.0) and VISA (3.01). Does anyone know what exactly causes this error? The help on the error is not very detailed. I tried the same program on a Win2000 PC and it works without any problems. I also tried another VISA communication program on the Win98 PC and the same error occurs.
    Thanks in advance,
    Michael

    Dave,
    not really a solution, but a suggestion.
    Windows is by far not a real-time OS. And there are several buffers
    involved when doing serial communication.. The first one when watching
    from the serial cable side is the UART. This one is the one that is
    affected by serial handshake. A system driver acts as the interrupt
    service routine ISR whenever this buffer is nearly filled or emtied and
    performs some coying to or from a system buffer. LabVIEW as user mode
    program uses this buffer for ist serial reading and writing. This
    system buffer is often not taken into account. Its default size is
    often not as much as one would expect and some few kB of data may
    easily overrun it. I have learned this when performing serial highspeed
    transfer with up to 13 ports simultanously.
    You can use 'VISA Set I/O Buffer Size' to set this buffer after you
    have configured a serial port. AFAIK one can set the buffer size of
    both directions to a value of up to 32765 bytes. Yes, not 2^15, but
    2^15 - 3. But do not rely on the exact number, please.  Test it on
    your system.
    How can this buffer overrun?
    Well, WinDoze can (occasionally) take some time where nothing happens
    with end user code. This may happen when awakening the hd from power
    save mode or when doing some network actions. And there are a lot of
    other possibel reasons. This does not affect the system driver, which
    fills up the system buffer when serial transfer is in progress.
    Your code may as well operate in 'bubbles' that do not allow to empty
    the buffer in-time. Think of DLL code or subroutine prioritized one.
    All this may be eased if not solved by setting the system buffer size
    to the limit, as it increases the delay your whole system can ignore.
    Just my  Euro 0.02
    Greetings from Germany!<br>-- <br>Uwe

Maybe you are looking for

  • After Boot Camp partition, iMac no longer boots

    Hi, I have a 20" iMac Core Duo (the first Intel Mac off the line) running Snow Leopard 10.6.4. I ran the Boot Camp Assistant to partition my hard drive, and it successfully created the "BOOTCAMP" drive. When it asked for my installation CD, I tried l

  • Idoc LOISTD01 to JDBC

    Hello, I've a interface IDOC to JDBC, I need update_insert into table of database. My problem is a mapping with IDOC LOISTD01. Structure of IDOC E1PLSEL 1..unbounded      E1MDPSL 1.. unbounded Structure table of database mt_database   STATEMENT     

  • Can't render background color in JComboBox, after selection.

    I don't understand why this problem is so difficult. It is driving me nuts. If I create a renderer for a Jcombobox, it will correctly render TEXT and COLOR if it is displaying it in the pop up list, but as soon as it has been selected, the combo will

  • Is there a documented limited on the number of download connections?

    I have itunes 10 running on windows vista and when the option "allow simultaneous connections" is on, itunes tries to make 3 server download connections. The 3rd connection always fails. Has anyone else had this problem? Is it a windows resource rest

  • Wrong version of mail.app after time machine restore

    So the hard drive on my iMac was complaining this morning and required a restore from Time Machine, which appeared to go well. I chose the most recent backup (yesterday) and Adobe Bridge / PS crashed / gave an error on first boot. Aside from that the