Apple TV sync is taking forever- Will this happen each time I sync?
I just got a new Apple Tv. I am syncing 12 movies from iTunes and about 650 songs. This is taking forever! My question is, if I add a new movie to iTunes and want to sync it to AppleTv, will it take this long again? If I uncheck the rest of the movies for syncing, will it erase them from the Apple Tv? I do not think I can wait this long each time I want to add a new movie to the Apple Tv. Thanks in advance for you help.
I just bought an Apple TV and began experiencing this problem once I moved my iTunes library to an external drive. I have a MacBook Pro so I was quickly running out of room. I moved my library to an external drive that is attached to my Airport Base Station. But I'm having issues syncing and streaming. It begins to sync but goes on and on and doesn't stop. Even when I try to stream the content it constantly stops to load and repeats the process again and again. My external hard drive is a 1TB Western Digital USB 2.0.
I've read about a lot of syncing issues so far. If this continues I'm going to simply return it because it really doesn't do what it claims it should do very well.
Is this a software issue? Is it because I moved my iTunes library to an external drive? Even when I play videos on my computer it still has issues playing back.
Any feedback would be greatly appreciated.
Similar Messages
-
When I try to manually backup my ipad2, I receive an error message stating "There was a problem completing the backup. Please try again later" ... and this happens each time I try to back up. Grateful for suggestions ...
Seems to be a common enough problem. I've deleted the partial failed backup from iCloud, restoring all 5Gb of storage. Then started a manual backup. After about 20 minutes I get the same error message. I have repeated this several times. According to my iTunes on my laptop I managed one backup to iCloud from there but it is pointless if u can neither backup to or restore from iCloud via my iPhone 4. I had hoped ios 5.0.1 would solve this glitch but ....
So much for "it just works".
I have yet to see any suggested fix that works for me. Any other suggestions? -
I have the newest version of itunes 11.1.3.8. I have uploaded a CD into my itunes library. I would like to add one song only to my iphone. I have created playlists on my iphone and each time I sync all of my iphone playlists get erased and I have to recreated them. after the sixth time, I am very hesitant to do any kind of syncing. Is there a way to just move one song without syncing? I have read some posts that talk about this but have not been able to do it. For example, the "summary tab" does not exist on my version of itunes. I tried drag and drop on itunes as explained in their help section but that did not move the song to my iphone. Please help
You are probably running OS 10.4 or 10.5 on a PPC Mac. No version of iTunes higher than 10.6.3 is available for these older Macs. I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher. The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac. I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.
-
why when i want to download a free app from app store it asks for my apple id and when i give my apple id it then says "this apple id has not yet been used in the itunes store". i dont even know what that means and it will this happen everytime?
If you are within 14 days of purchase you can still return the iPhone and get the phone that suits your needs, however, I think you will find that no matter which phone you get the content provider will want to know how you are going to pay for future purchases. For Android phones it is Google, and they will certainly want to know.
To create an Apple account without a credit card see: http://support.apple.com/kb/HT2534 -
My computer crashed with all my itunes files. I was able to get some off and transfer them to another computer. I am afraid to sync my ipod to the new computer becaused I do not want to loose all of my playlists and other music. Will this happen?
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them. -
I've held back on updating to ios7 on my iPad because when I I updated my phone I lost everything and had to go to an apple store. Will this happen to iPad? Can anyone advise me please?
There shouldn't be any problem but, if you are worried, do a backup before the update.
-
I tried to update my iPad to iOS 7.0.2. and all I have now is screen asking to be connected to iTunes. Message tells me iPad is in 'recovery mode' and recommends 'restore' but that I would lose all data as this would restore factory settings. Any suggestions?
Apple helpline is 'not taking calls at this time'!!!Your data is already gone. Why did you not take regular backups of your data? Now you know why you should.
-
I have a lot of old contacts I want to delete that are on all my devices. If I delete them on my iPad and then sync with my mac, will this delete the contacts on my mac too? And then if I sync my iPhone with my mac will this delete the contacts on my iPhone?
Yes.
If you don't want that to happen, then don't select the "Sync Contacts" option on your next sync. -
When I try to sync my apps with iTunes this message pops up: "cannot sync apps with iPhone because the apps on iPhone cannot be determined." Any ideas? It has always worked in the past...
On you iPhone, force close all the Apps in the multitask window.
Follow these steps to force an app to close:
From the Home screen, click the Home button twice.
Tap and hold on the app.
When it starts to jiggle, tap the to close it one by one until all cleared
Now do a Soft reset of your iPhone:
Hold both Home and Sleep button for around 10secs until you see the Apple logo then release. After it returns to Home screen, connect to sync and see if this resolves the issue. -
When I want to get on my wifi I tap my wifi in settings but it just loads and says unable to connect. It wont let me sign in. All my family's apple products are working. Why is this happening?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My ipod classic continually turns on and off. I cannot reset and have tried many times. This happened when I tried syncing with my pc. My pc runs vista.
i Recently had my pc system hard drive wiped and restored.It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock -
I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
When will this happen? beta of Flash Professional CS5 with support for building applications for iPhone by the end of 2009
Sadly.... NEVER
-
I bought a USB power adapter for my ipod nano so i can take it camping and use an outlet. Will this take less time for charging or the same amount as the computer?
Hi, Atcandela.
I've a Macally external fire/usb enclosure that powers up and mounts directly on to my PB Aluminum 1.67 laptop but the USB portion doesn't draw power.
Do you mean it mounts and works OK when connected via FireWire, but not when connected via USB? If so, that's unsurprising. I would be surprised to hear that it doesn't mount when you use the FireWire connnection, because most drives are able to get enough power from that port.
Does MacAlly not offer a cable for your drive that allows it to draw power from both your USB ports? Some manufacturers of external drives or enclosures do offer such a cable, and it's well worth buying because it's much smaller and more portable than an AC adapter. Have a look at this one from Western Digital — it might fill the bill for you. -
keep trying to get onto appstore and its says my apple ID is disabled. Why is this happening and how can i fix it?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards.
Maybe you are looking for
-
How to setup exclusion indicator in price?
who could give me a example about how to use exclusion indicator in price? That is to say how to cause different result according to different indicator value. what are needed to setup step by step?
-
AII 4.0 - Error "URL must have a host part" with Auto-ID Cockpit
Hello Everyone, I'm new to AII and i'm just setting up the Auto-ID Cockpit. In the IMG, i defined the URL by "Assign Auto-ID Cockpit URL" like "http://xxxyy:50100/webdynpro/dispatcher/sap.com/ainsodesktop/DesktopApp". By calling the Auto-ID Cockpit b
-
My password keeps getting reset
Nearly every day now my Apple ID password gets reset. I had some problems with my security questions being changed so had to ring up Apple to sort it. I don't have another email which I'm guessing will stop this? I'm running out of passwords to have.
-
HP Color LaserJet CP6015xh panel displays message "Changing Fuser Temperature"
My Color LaserJet CP6015xh printer is displaying this message on the display: "CHANGING FUSER TEMPERATURE" I can't find this message mentioned anywhere on the Internet, which is strange, because usually any message you see on a printer screen has bee
-
N8 video editing in win7, strange results
Im trying to edit filmclip done by my N8. Using windows 7 32 and 64 bit In Adobe Elements Premiere 9 and Premiere 5, the programs think the filmclip is 500 frames/sec and whn I change to 25fps (In Pre 5) it look very strange with kind of artifakts. I