Apple TV, Time Capsule (or Airport Extreme) and streaming movies without running iTunes?

I'm thinking of buying an Apple TV but as far as I know I'll need my computer on to run movies from my iTunes account, which is something I really don't want to do every time I want to watch a movie, just wondering if this can first of all be confirmed?
Also, If I buy Apple TV and an apple time capsule (or an Airport extreme connected to a HDD), can I stream movie files located on the time capsule (or HDD) to the AppleTV without having to turn on the computer and run iTunes?

Yes you need your computer on if you want to stream from its library, even if the library is on an external or network drive.
However any purchases you have made from iTunes can be stream from the iTunes Store at any time without your computer being on.

Similar Messages

  • Using a current Time Capsule with Airport Extreme and Airport Express Older generation

    I am looking to achieve a fast local network that allows streaming of music and video. I have bought a Time Capsule to replace the Telstra router (Thomson Router) by linking it using ethernet cable and then set up a network that also uses and older airport extreme and express router (g standard).
    It would appear that the local network speed is slow - how can I assess the connection speed in the local network - both wireless and for ethernet?  I believe that there is a speed indication on my two older macs running OSX 10.5 but not in OSX 10.6.  Is there a tool to assess the local network speed?
    The current set up works less well than previously only using the Thomson router, so the initial results are very disappointing.  Not even streaming music seems to work and it stutters to halt.
    I had expected that the dual band functionality would allow fast local connections where needed.  What do I need to change?
    Thanks you.
    Tom

    Hi Bob,
    The two old airports (extreme and express) are connected wirelessly to the time capsule base station with the following use:
    - round extreme base station supports a printer only - remote WDS indicated in set up
    - airport express supports remote speakers - set up does not indicate WDS status
    I noticed in another note to provide a second network name to 5GHz network and connect the modern computers, ipad (seems to be able to connect) and apple tv to the 5 GHz network, leaving the other on the separate network.  Also the two computers, apart from the laptops are connected via ethernet to use the GB ethernet, but I am not sure whether that speed is achieved or whether a firewire connection between the two would be better. use examples are:
    1. Wirelessly I am trying to use three speakers - computer, apple tv and express - to have to listen to the same music in three rooms.
    2. Over ethernet, I am using the the powermac as a file server to mac mini, but would like to be bale to access photo libraries (both Iphoto and Aperture) ideally over the network.  It works well with starting the powermac in target disk mode but seems slow over what should be a very fast ethernet network.
    The connection with the service providers router and time capsule is bridged - seems to be the only way of providing internet access - however, it also seems to allow for shared devices to be visible across the two time capsule and the Thomson network. 
    Obviously, this will need some more experimentation but any input would be appreciated.
    Thank you and regards,
    Tom
    PS> Timezone wise I am currently living in Australia - must change my profile one day.....

  • How to Set Up Time Capsule With Airport Extreme and Airport Express

    Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
    Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

    evelK wrote:
    Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
    Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
    I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

  • Adding time capsule to airport extreme and airport express

    I am new to the Mac world. I have the airport extreme with an airport express extender at home. I want to buy the time capsule. Will this replace the airport extreme?

    You could configure it that way.  If so, the easiest way to configure it is probably to use AirPort Utility to do a File > Export Configuration File with the AirPort Extreme followed by a File > Import Configuration File with the Time Capsule.

  • Should I get a Time Capsule, an Airport Extreme, or a Linksys Wireless N?

    Hi I have several questions before I make my purchase. I've got 2 computers in my upstairs bedroom that are wireless. I currently have a Wireless router which is a Linksys WRT54G.
    It's already getting on in age so I was thinking of replacing it with a better wireless router. I'm deciding weather I should go with a Linksys N or go the apple route.
    Will I get faster internet if I go with a Linksys Wireless N? What is the difference between G and N?
    I was thinking of getting a Time Capsule because I wanted an automatic backup of my data.
    Is a time capsule going to perform the same as a Linksys? Which router is better?
    what is the difference between Time Capsule and Airport extreme. Are they basically the same with the only difference being the hardrive?
    If I get a Time Capsule then do I still need a Linksys router? Is it easy to setup a wireless network using a Time Capsule or Airport Extreme?
    Last question. My mom's computer upstairs uses a Linksys Wireless G usb adapter. It is also getting on in age.
    The connection is always labeled as low and sometimes she can't go on the internet. What would be a much better wireless adapter for my mom's computer?
    Any help is greatly appreciated.

    Stuart Lawrence wrote:
    Hi I have several questions before I make my purchase. I've got 2 computers in my upstairs bedroom that are wireless. I currently have a Wireless router which is a Linksys WRT54G.
    It's already getting on in age so I was thinking of replacing it with a better wireless router. I'm deciding weather I should go with a Linksys N or go the apple route.
    Will I get faster internet if I go with a Linksys Wireless N? What is the difference between G and N?
    Enough of a difference for it to be worthwhile.
    I was thinking of getting a Time Capsule because I wanted an automatic backup of my data.
    The backup app is Time Machine, not Time Capsule. TM can work with any external HDD connected to the Mac, but only TC is officially supported for wireless backups by Apple. Hacks are possible to connect a USB HDD to an Extreme.
    Is a time capsule going to perform the same as a Linksys? Which router is better?
    Better if we are talking N vs. G.
    what is the difference between Time Capsule and Airport extreme. Are they basically the same with the only difference being the hardrive?
    Yes, but that is a significant difference.
    If I get a Time Capsule then do I still need a Linksys router?
    No.
    Is it easy to setup a wireless network using a Time Capsule or Airport Extreme?
    If you can setup your Linksys, you should be able to setup the AirPort as well.
    Last question. My mom's computer upstairs uses a Linksys Wireless G usb adapter. It is also getting on in age.
    The connection is always labeled as low and sometimes she can't go on the internet. What would be a much better wireless adapter for my mom's computer?
    Sorry, none off the top of my head. Maybe you can provide the details on the computer she has.

  • Airtune Over Ethernet  with Time Capsule or Airport Extreme

    Can the previous generation Time Capsule or Airport Extreme bridge an ethernet client to an Airtunes network?
    Current Setup: I have an aluminum iMac wired to my Time Capsule; currently, I use the aluminum as a music server by connecting to several Airport Express clients over the the iMac's built-in Airport for Airtunes support.
    Problem: I have 3-802.11g clients dragging my wifi network. I would like to dedicate the iMac's internal network to the g-clients so I don't have to use compatibility mode for my n-network. However, I will lose Airtunes speaker support when I use internet sharing over the built-in Airport. Airtunes does not appear to support the Time Capsule ethernet client.
    Nodes:
    -AE 802.11g (Airtunes only)
    -AE 802.11n (Airtunes and USB printer)
    -1st gen Time Capsule (Internet gateway, "creating network" 802.11 g/n,
    -iMac 8,1 (Music server via internal wifi, wired TC client)
    -Macbook 4,1 (wifi client)
    -iPhone
    -Canon MP620 (USB to iMac, wifi to Macbook)

    Further to Bob's comments..
    A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
    The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
    Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
    In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

  • Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?

    Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
    I would like to strem movies from the hard drive to iphone.
    I have already seen the Goflex Stellite, which works this way.
    Is there any other device that could do this?

    I did a typo. My current computer is a 2010 1/2 iMac.  The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs  would be possiblities.
    Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days.

  • How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

    What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
    How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
    Thank you,

    AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
    It works with N version airports.
    It will also show details of the AC model but cannot be used for the setup.. mostly.
    I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
    Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
    I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
    If you do not use ethernet then you are going to be forced to accept slow speed.
    EOP (ethernet over power). Also called homeplug in the US.
    http://en.wikipedia.org/wiki/HomePlug
    Provides a method of networking over power cabling that already exists in your house.
    So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
    To spell this out.
    A wireless link to an extended device will go very slowly.. if it is not direct.
    So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
    That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
    Ethernet by contrast does both at once. It is full duplex.
    Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
    Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
    When you put all this together.. there are a couple of rules for fast connection.
    1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
    2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
    3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
    Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

  • Poor internet speed with time capsule or Airport extreme

    I'm trying to find away to increase the throughput of my 1st generation tme capsule. i'm getting a 33% drop in speed over wireless compared to wired conncetions.
    current setup
    Virginmedia XXL broadband  100Mbit down  5Mbit up.
    Modem standard virginmedia modem (not the superhub) connected to Apple time capsule (500Mb) @ 1000Mbit full duplex
    time capsule reset to default and then configured to use 5Ghz band, channel 36 . (no other networks in the area using this band) tested using wifi scanner and istumbler
    tested down/up speed using www.vmspeed.com
    wired connection
    105Mb/sec download   4.9Mb/sec upload
    wireless connection
    73.14Mb/sec download   4.7Mb/sec upload
    i have tried testing with an airport extreme 3rd Gen with the same setup and get the same results.
    Tested using a 2008 Macbook running Lion 10.7.3 and also tested using 2010 Macbook unibody running snow leopard 10.6.8. both laptops connecting to wireless network at 270Mb/sec and are both exhibiting the same drop in speed over wireless. only one laptop connected to the network at a time.
    is thier a limit to the time capsule/airport extreme wireless throughput?

    Further to Bob's comments..
    A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
    The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
    Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
    In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

  • Adding Time Capsule to Airport Extreme/Epresses

    I'm not sure if this is the right place and I'm posting this question in other Discussion groups as well. If this isn't the right place, please let me know where I should post this.
    I just purchased a Time Capsule. I've got an old (cone shaped) Airport Extreme and two Airport Expressses (to extend the range of my wireless network).
    I've also got a DSL modem which is connected to an old SMC Wireless router. Right now the Airport Extreme is connected (in bridge mode) to the SMC Wireless router and the Expresses are "connected" to the Extreme. There's also a printer connected to the Express.
    Everything works (more or less) fine as things are (there are some issues with two laptops trying to use the Extreme/Express network "knocking each other off, but that's not what I'm concerned with now).
    I'm wondering whether I should replace the Airport Extreme portion of things with the Time Capsule, or if I should just connect the Time Capsule to the SCM Wireless router (it has four or five ethernet out ports) and set it up to work with the Extreme/Express network some how.
    Has anyone ever tried that kind of thing or have any input?
    Thanks!

    Thanks for the input! I wouldn't mind doing away with the SMC part of things, but there are some "legacy" reasons why I keep it (plus it does have a more ethernet ports than either the Extreme or TC).
    As for this:
    "Also, a possible reason of why there is an issue with the two laptops connecting to the network, is that maybe they are trying to be assigned the same IP address, and so therefore are cutting each other off when they connect to the network."
    I'd worried about that, but . . . I've got an old Pismo that can talk to the Extreme at the same time as my MacBook and an Apple TV and two iPhones and a wireless webcam that all talk to the Extreme while the MacBook does. It's only the MacBook and MacBook Pro that have problems with each other. I've check the MAC address (or whatever) of them and seen they're different. For what it's worth, the MacBook started life as a clone of the MacBook Pro.

  • How do I control my airport extremes/time capsules w/airport utility over the internet without mobile me? iCloud has disabled this function.

    How do I use airport utillity with Time Capsule(or any airport extreme) over the internet without mobile me? iCloud has disabled this function. The mac's that I have not upgraded to icloud still see my routers over the internet with mobile me enabled.  Are these routers obsolete now or will there be a firmware update to use icloud?

    i want to do the same. i tried entering my @me.com account and does not work, but if I tried to go to icloud.com and using my @me.com works
    why?
    does the Airport express needs to be upgraded as well

  • 10.5.6 Can't search shared (time capsule or airport extreme based)

    I just purchased and installed a 1T time capsule and also a Airport Extreme. Time capsule drive is configured and working with user-based access. I also have a external powered drive on the Airport Extreme that is also configured for sharing via user access. I can mount and browse and read and write to both drives.
    None of the SHARED searches are working at all. When I try to search based on either file name or file contents, nothing happens at all. I can search for files on the local drives with not problem.
    This is frustrating because searching shared volumes was one of the big touted features of Leopard.
    Any idea what's happening here or how to fix this?

    Start with a search for *search server*, *search share*, *shared search*, or variants. There are many recent posts on the subject. Whether or not there are solutions, I haven't a clue since everything I have is connected directly—no wireless stuff here.

  • Time capsule with airport extreme

    Good afternoon,
    I'm trying to figure out how to configure my time capsule with my airport extreme and with all the rest as described below (see: "toys"). But the information I've gathered is somewhat dubious.
    So I'm hoping someone can help me out.
    My "toys" are: TimeCapsule, AirportExtreme, iMac, iPhone 4s, iPad, AppleTV, 2 laptops, a kidstablet and a PSVita.
    And naturally this was/is all wireless and that seems to be a bit of a problem because if everyone is using the wifi-signal it says bye-bye.
    The configuration I have in mind is:
    modem --- wired --- timecapsule (wan???) --- wired ??? --- AirPort Extreme --- wired (???) --- iMac
    and then everything else wireless
    Is this a good configuration? Can I do better?
    And do I have to change some of my settings in the process?
    Already a big thanks in advance !!!

    do I put the wire in to the WAN port of the timecapsule
    Yes
    and from the TC to the APExtreme LAN to LAN
    Recommend LAN on the TC to WAN on the AirPort Extreme for consistency, although it does not really matter in this case.
    and from APExtreme LAN to iMac?
    Yes
    The settings are latin for me so I haven't touched any of the settings
    If you power off and disconnect the AirPort Extreme, is the TC wired to your modem now?
    If yes, do things appear to be working OK with the Time Capsule and modem?

  • Airport Utility not recognizing Time Capsule after Airport Extreme Update08

    After installing the Airport Extreme Update 2008 my Time Capsule keeps crashing. I have powered down both my DSL modem and the Time Capsule, done a hard reset of the Time Capsule and yet it continues to flash amber lights. Yesterday, after hours of resetting everything and finally getting a green light and an internet connection, today my network and all of the airport setting have completely disappeared. Is anyone else having this problem and if so, have you found a solution? Is there a way to uninstall this updates as I believe it has caused these issues?

    Josto,
    Unfortunately, you are not the only one:
    Latest OS X Airport update Broke connectivity
    [http://discussions.apple.com/thread.jspa?threadID=1771190&tstart=0]
    *_Contact Apple For Support Issues_*
    If you are continuing to experience issues, make sure you contact Apple. They do not look at these forums to gauge the extent of issues. You need to contact them or they will never know.
    Phone:
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
    Feedback:
    "Tell us how we’re doing. Select the appropriate feedback option (we read everything, but can’t always respond):"
    [http://www.apple.com/feedback>
    *Genius Bar:*
    "An Apple Store Genius Bar is the place to go for advice, hands-on technical support, and hardware repair from a Mac Genius." Find your store and make a reservation at this link:
    [http://www.apple.com/retail>
    Cheers!

  • Time Capsule 80211N / Airport Extreme 80211B/G/N

    Hi!
    I have a new Time Capsule currently set up using 80211B/G/N. This is because I have an Airport Express connected to an Apple Hi-Fi. Also an iPhone that is not compatible with N.
    Would it be possible somehow to connect my old Airport Extreme as a bridge using 80211B/G/N, but run the TC as 80211N so I can use my Hi-Fi and phone? I don't think so but thought I would ask.
    Thanks for any help!

    VvShannonvV wrote:
    The time capsule is connected to the base unit via ethernet cable so anything wirelessly connecting to the TC will connect at "N" speed and anything connecting wirelessly to the linksys is at "g" speed. Does that make sense?
    Actually no, it doesnt make sense. If your linksys router is that old, it does not have gigabit ports and will not run at n speed to any other device regardless of connection type. While you may connect using a n network on the TC to wireless devices, they will not be anywhere near n speed as the slowest segment of your network is 100MB.

Maybe you are looking for

  • Processing LONG RAW in the trigger

    I'm currently using Oracle 7.3.4.x. I'd like to perform in the update trigger of LONG RAW column the copy of that value to another table. Since the :new and :old is prohibited in triggers and you cannot defined variables as LONG RAW data type in the

  • Re: 970 Gaming is quite hot

    Go to intel graphics control panel, select power, select max performance for the plugged in and on battery. Also disable power saving and automatic display brightness.

  • RE:Purchase Order/Purchase requisition approvals

    Hi All, I have created my own setups in http://vis1213.solutionbeacon.net, i did all the setups and approval process, but i couldnt able to approve even a single  purchase order. Error shooting like No approver found for the standard purchase order.

  • Phase 2: Another USB Query

    I seem to have no problem getting the JUSB1 and JUSB2 ports to be USB 2.0, but the box and manual for my mobo state that I have *8* active USB 2 ports! This seems strange since I have 4 hard-wired to the board, and 2 others (JUSB1 and 2). Question 1:

  • SNAP profiles and ads for newsprint

    I've posted before regarding newsprint and Rob has posted links to profiles for newsprint. I have a SNAP profile I started using recently on all my newsprint exports. I've noticed, with and without SNAP profile, though I export my PDFs with the same