Apple TV to HH3 wireless - no option to enter pass...
Hello all - looking for help.
Just trying to install Apple TV. It spots my HH3 wireless network but then tells me that wifi password I entered is not correct.
It hasn't given me an option to enter one!
Any ideas?
Thanks in advance.
What do you see under settings?
Do you have a network setup?
1. Network Configuration
Have your network password (if you use one) and your Apple Remote handy to configure your Apple TV. Make sure there are no obstructions between the remote and Apple TV. Read more about using and troubleshooting the Apple Remote.
If you:
Use a wired Ethernet network to connect, Apple TV automatically detects your network.
Use a wireless network to connect, Apple TV helps you select and configure your network connection.
Connecting to Your Wireless Network
Apple TV will help you connect to your wireless network. If you use a password to access your network, have it ready. Use the Apple Remote to:
Select your network from the list, or enter your network name if the network is hidden.
Enter your password (if you have one).
Similar Messages
-
While downloading the new apple software to my I-phone , a prompt asked me to input my "Apple ID and password", BUT the option to by-pass and continue was also offfered, so I by-passed and did not enter my Apple ID or password because I had forgotten it temporarily and wished to continue the lengthy time to download.
Consequently, when I attempt to add updates to the Apps. on my I-Phone, a new prompt appears stating that my "Apple ID has Been DISABLED." There is no additional language as to why it was disabled in regard to my I-phone. FYI, my "Apple ID and Password" continue to function ., ie are "ENABLED",in regard to my Apple desk top computer.
This disabling of my Apple ID results in an inability to update my I-phone for anything.
My question/request is as follows: How do I "enable" my apple use by having my I-phone recognize my existing Apple ID and password ?Hi Lrwill,
If the apps that are on your son's iPad were purchased under his Dad's Apple ID, then signing your Apple ID onto the iPad will not help you with updating those apps.
Also, if the iPad was sync'd with his Dad's iTunes library, then hooking it up to your computer/iTunes library, will require you to reset the iPad, and everything that was loaded under the other Library and Apple ID will be wiped out.
Can you provide a little more info about what was set up under which Apple ID and what iTunes library the iPad was sync'd with?
Cheers,
GB -
No wireless connection option when i set up my apple tv even though wireless is working at home. No option under settings to set up wireless connection. Does it mean wireless is broken?
What do you see under settings?
Do you have a network setup?
1. Network Configuration
Have your network password (if you use one) and your Apple Remote handy to configure your Apple TV. Make sure there are no obstructions between the remote and Apple TV. Read more about using and troubleshooting the Apple Remote.
If you:
Use a wired Ethernet network to connect, Apple TV automatically detects your network.
Use a wireless network to connect, Apple TV helps you select and configure your network connection.
Connecting to Your Wireless Network
Apple TV will help you connect to your wireless network. If you use a password to access your network, have it ready. Use the Apple Remote to:
Select your network from the list, or enter your network name if the network is hidden.
Enter your password (if you have one). -
I have an airport extreme and the utility is 6.1. I also have an airport express. I'd like to use the airport express to extend the WiFi. The "extend the wireless network" option does not show up in the Airport Utility 6.1. How do I go about finding that option? Is it something that doesn't need to be checked in Airport Utility 6.1?
I'm having the same issuse, the only work around I have found is by using an older version of airport utility
AirPort Utility 5.6 for Mac OS X Lion
http://support.apple.com/kb/DL1482
Hope that helps -
How to connect an apple tv to an enterprise network with a username and a password?
I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.
-
How to connect apple tv to xfinity wireless
I am trying to connect my apple tv to xfinity wireless Internet connection. I am using my old first generation I pad going to settings> general> network don't seem to help any suggestions as to how I can connect.
You have to use the bundled remote to navigate the Apple TV and its settings to set up the network.
-
I am unable to stream Netflix to my Iphone or Apple TV, from my wireless router . . . even though I am able to watch Netflix on my WII (also wireless) and desktop computer (not wireless).
On the Iphone and Apple TV I can connect to Netflix . . . it recognizes me and my account settings . . . and I can veiw all my recent programs and show titles, descriptions, etc.. But when I select one to watch I get a message saying:
"ERROR A PROBLEM OCCURED WHILE PLAYING THIS ITEM. TRY AGAIN LATER, OR SELECT A DIFFERENT ITEM. GO TO WWW.NETFLIX.COM/SUPPORT FOR MORE INFORMATION. (139)
Netflix support say there is nothing wrong on their end . . . that it is an Apple issue. They see the request for the show, the devices are registered . . . but it shows 0 bandwidth to the device.
My Apple TV did this when I first hooked it up a couple of weeks ago. Then after a few days started working with Netflix, for no apparent change . . . now doesn't again for the past couple of days (I think that it auto restarted the other night after a virus scan).
Very frustrating, and driving me nuts! Has anyone else had and been able to resolve this problem?Troubleshooting
Apple TV2 update one day and netflix is browsing but not launching the actual content (error 139)
Ipad2 (another ios device) forces me to update netflix if I want to use it and I get the same error 139 on it.
**** now I have two not ways not working where prior to some update it was fine.
Nintendo Wii is still working ( mind you running an ancient version of netflix ) Dusted the Wii off and gave it to the kids use. Now they are happy again...
PC is also still working ( using some other flash client ) but that's just of interest, we're not going to be watching tv with that.
My wife's iphone 4s is still working. Odd.. still ios but for somereason I am not forced to update the version. So basically she could mirror stream up to the apple tv with it. Nice feature of Ios5. Later found out it is using 1.4 version of netflix. The most useful thing out of that is that all 3 of the devices are Ios and it was actually the iphone with the 1.4 version of netflix that still worked!
I heard from a friend who was on a different ISP he was still working so I took my appletv2 and ipad2 over to my brothers house who is on that same ISP as my friend and both started working. So the ISP is involved too!
Brought the appletv2 and ipad2 back to my house hoping it would maybe still work. No dice Broken again.
Searched the appstore for a decent packet analyzer and there isn't really anything. I was able to sniff the traffic with my PC and also on my juniper ssg5 confirmed that. Turns out port 80 traffic is actually failing and authorization is not happening. The other clients do not do this...
Asked a buddy from work who used to work at the ISP if he could make a call to some one who might actually know what is going on. He came back pretty quick and said yea they are trying really hard to get the beta patch in from Bluecoat asap.
So knowing that it was actually Netflix that changed when it hit 2.0 and in my case the ISP made the adjustment it's pretty safe to say this issue is going to be ongoing unless netflix changes again the way they authorize for licenses.
So that's the summary of what went right down the troubleshooting path but I'll tell what what didn't
2 calls to Netflix (useless... waste of time... they are too quick to blame anyone but themselves)
1 call to apple support (support call was going to cost more than it cost for me to change ISPs)
2 calls to ISP (through the normal means - regular support number)
So why is this intermittantly working sometimes? If you are lucky enough to authorize to an IP address that is not cached they voila you are going to get an authorization / a license to watch the show. Some people report after defribulating their appletv (reseting, rebooting, dns changes, you name it) they get it working. Over the past month we all seem to have got it working for some period of time only to lose it a day to two later.
It's now been several days since the beta patch to the bluecoat and 4 of us who have been communicating on the issue appear to be online all at the same time for those several days and that is a good sign that we might be out of the woods on the issue.
Hope this turns into something helpful for someone else out there. -
I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro
Mac Pros don't support Airplay. Only some post 2011 Macs do, MAc Pros aren't amongst them.
http://www.apple.com/uk/osx/specs/
You could try Airparrot software as a workaround.
AC -
I used to look my photos in my tv using apple tv, now i can't when i access through apple tv/ computer/ my library photo option is not available, i check home sharing and which photos i'm sharing from my mac/itunes but i still can share photos w/apple tv
Morning JJFH,
Thanks for using Apple Support Communities.
If after setting up Home Sharing, you cannot access your shared iTunes library over your home network from your Apple TV, take a look at this article:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Best of luck,
Mario -
My account is blocked out. I registered my account for Russia because there was no that option for Ukraine. And now I can't do any purchasing, because apple store want's another payment option. What should I do? I have many apps on my account but I can't do even updating. Ps my friends here has such a problem too
Ukraine is there. It's been there for a while. I even see it now.
-
Can I turn my soon to be old Apple TV into a wireless hard drive???
Can I turn my soon to be old Apple TV into a wireless hard drive???
Exactly. That's my question? There's a 40gb hard drive about to be tossed if I were to purchase the new Apple TV. I assume there are features the new one will have that old does not...?
Either way still a good question because there is a 40gb hard drive that has just been sitting there unused. It would nice if it could be used as a data storage device.
Currently I just stream content thru the Apple TV or rent movies directly from the ATV (not at the computer and then wait for them to transfer to the hard drive) -
Can I turn my soon to be old Apple TV into a wireless hard drive like TC???
Can I turn my soon to be old Apple TV into a wireless hard drive like the TC???
Exactly. That's my question? There's a 40gb hard drive about to be tossed if I were to purchase the new Apple TV. I assume there are features the new one will have that old does not...?
Either way still a good question because there is a 40gb hard drive that has just been sitting there unused. It would nice if it could be used as a data storage device.
Currently I just stream content thru the Apple TV or rent movies directly from the ATV (not at the computer and then wait for them to transfer to the hard drive) -
Is the apple time capsule a wireless router
is the apple time capsule a wireless router
Yes, it's a 802.11 a/b/g/n (pretty much all the popular wireless standards). If you get the latest generation, it will also give you TWO wireless networks - the main one for you and a guest network. It has dual bands so that your guests can connect outside of your network.
It also has 4 Ethernet ports on the back to connect non-wireless devices. -
Trying to connect my new Apple TV to the wireless network. When I try to use the remote the Apple Tv doesn't respond ( doesn't go to the next screen). Could this be caused by a weak wireless signal?
It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks -
Im trying to get my wii online, so i wanted to access the wireless router options, where u up the IP in the address bar, signed in, i only can acess the setup, wireless, and security tabs anything else i click on gives me a "internet explorere cannot display the webpage, i tryed turinning off the wirewall very breifly to see if it would let me accesses it didn't. please help! o and its a wrt54g v8
Message Edited by XpErTags on 03-19-2008 12:38 PMwhen you tried to access the set up page did it ask you for the network key? if not could you check the ip address on your computer?
Maybe you are looking for
-
Complex headache in the PO history. Wrong postings in MIGO,MIRO
Much appreciate if anyone could help on this issue. What we have done: we have a Purchase Order of 3 line items with the quantity in 300,200,100, respectively. the net price for each unit is $1. In MIGO: 1. we posted MIGO with wrong quantity and wron
-
All items in ECC not replicated in SRM
Hi friends, Currently we are working on SRM 5.5 as an addon to ECC 6.0.When we set up the SRM development system there were a few materials in ECC.We used the transaction MDS_LOAD_Cockpit to replicate first the material types,then the material groups
-
I'm trying to download itunes in order to start up my IPad2 but cannot open itunes
-
Create report to get lat 30days Metric alert & Alert log errors Grid
We would like to create a report to display last 30 day's mertric alert and alert log errros in EM Grid. How we can do it?
-
Need latest raw file patch for PS Cs 6 extended
I have bought a new camera and need the latest raw file for PS Cs 6 extended edition. I have tried DNG 8.4 converter, but no success. In PS help update say server not on line. this is now for a couple of days. I have an HP laptop with win7 64 bit. Pl